65
SXRC Remote Control
Operation
Press ENT to remove the selected amplifier
from the current selected group.
The display will flash RELEASED to confirm the amplifier has
been removed. Once an amplifier is
removed from a group it is added back to
the list of available amplifiers in the
ASSIGN menu.
Continue releasing the amplifiers you want
removed from this group by using the
UP or
DOWN keys to select the amp and the
ENT key to select it.
When you are done releasing amplifiers from
this group, press the
ESC key to return to
the RELEASE menu’s group selection screen.
You can then select another group to release amplifiers from.
NOTE:
While selecting amplifiers to remove from a group, If you
remove all the amplifiers the display will
read
N/A letting you know there are no
more amplifiers assigned to this group.
RELEASE MENU - Here you can remove any amplifier(s) from
a group it is currently assigned to.
An amplifier can only belong to ONE group at any time...so if
you wish to use an amplifier in a different group than the one it is
currently assigned to, you have to release it from the current
group. Here is where you can perform that precise surgical
removal process. Don’t touch the sides as you reach for the funny
bone. BZZZ!
Use the
UP or DOWN keys to select
which group you want to release an
amplifier(s) from and press the
ENT key to
select it.
If the display shows
N/A then there are
no amplifiers currently assigned to that
group.
If there are amps assigned to the group then
use the
UP or DOWN keys to scroll
through the list of amplifiers.
If you have multiple amps of the same make
or name you can check its’ Remote Address
to help you identify which amp you are
currently viewing. Simply press and hold the
ENT key and the Remote Address of
the amplifier will be displayed.
