60
SXRC Remote Control
Operation
led on lvl MENU - The backlit keys on the SXRC have two
intensity modes, On and Dim. When the
keys are pressed and in use they will
brighten to the level set in this menu. The
default setting from KICKER is 11.
Use the
UP and DOWN arrow keys to
scroll through the available settings:
11 (Brightest) to 0 (Off)
Press the
ESC key to save the setting and
return to the DISPLAY menu.
NOTE:
As you lower the brightness level of the LED ON LVL you may
not be able to reach the 0 setting. This is because the On level
can not be set any lower than the current Dim level. So...if the
Dim level (discussed next) is set to 3, you would only be able to
lower the On level to 3. If you want to use a lower value for the
On level you will need to lower the value of the Dim level.
led dimlvl MENU - The backlit keys on the SXRC have two
intensity modes, On and Dim. When the
keys are not being used they will dim to the
level set in this menu. The default setting
from KICKER is 3.
Use the
UP and DOWN arrow keys to
scroll through the available settings:
11 (Brightest) to 0 (Off)
Press the
ESC key to save the setting and
return to the DISPLAY menu.
NOTE:
As you raise the brightness level of the LED DIM LVL you may
not be able to reach the 11 setting. This is because the Dim level
can not be set any higher than the current On level. So...if the On
level (discussed previously) is set to 7, you would only be able to
raise the Dim level to 7. If you want to use a higher value for the
Dim level you will need to raise the value of the On level.
