33
SXRC Remote Control
Operation
hi-pass MENU - Here is where you adjust the selected
amplifier’s high pass crossover.
Use the
UP and DOWN keys to scroll
through
frequency and slope and then
press the
ENT key to select.
FREQUENCY selects the crossover point and can be set at any
1/12th octave spaced frequency from 10 Hz to 16 kHz.
(
10 Hz to 16132 Hz) SX.1 Series is 10 Hz to 159 Hz in 1 Hz
steps.
Use the UP and DOWN keys to select your
frequency. Press the
ESC key to save your
setting and return to the
frequency and
slope options menu. You can now select
another high pass crossover option to adjust
on this amplifier if desired.
SLOPE selects the roll-off of the crossover and can be set
from
oFF to 36 dB/OCT in 6 dB steps. SX.1 Series is OFF to
24 dB in 6 dB Steps.
Use the UP and DOWN keys to select your
high pass crossover slope. Press the
ESC
key to save your setting and return to the
frequency and slope options menu. You
can now select another high pass crossover
option to adjust on this amplifier if desired.
When you are done adjusting the high pass
crossover on this amplifier press the
ESC key while in the frequency and
slope options menu to return to the AMP ADJ
menu and choose another function to adjust.
NOTE:
While you are in the HI-PASS menu the
HPF indicator on the ISIS display is lit. This
indicates you are making adjustments in
the HI-PASS menu.
The KICKER SXRC monitors and prevents any high pass
crossover point from being set any closer than 1/3 octave from
the low pass crossover point. If you cannot set the high pass
crossover where you want then check the ISIS display and see if
the
HPF is lit and the LPF indicator is
flashing. If it is then you need to go to the
LO-PASS menu and raise the low pass
crossover point.
This is done as a safety precaution to prevent a notch filter
condition.
