Now use the UP and DOWN keys
to increase or decrease the gain of
the selected channel(s) in .5 dB
increments from 0 dB to +12 dB.
(
.0 to 12.0)
Press the
ESC key to return to the
LEFT, RIGHT, BOTH options menu.
You can now adjust another channel
on this amplifier.
When you are done adjusting the
gain press the
ESC key while in the
GAIN menu to return to the MAIN
menu.
NOTE...
While adjusting the GAIN you will notice the
gain indicator
on the ISIS VFD display is lit. This indicates you are in the
GAIN menu.
The
LEFT and/or RIGHT indicator will light up to indicate
which amplifier channel(s) you are currently adjusting.
EQ MENU - Here you can adjust the single band parametric
equalizer. Your options are
frequency, bandwidth and
boost/cut.
Press the
ENT key to enter the
EQ menu.
Use the
UP and DOWN keys to
choose one and press the
ENT key
to select it.
FREQUENCY selects the center frequency of the EQ and can
be set at any 1/12th octave frequency from 20 Hz - 20 kHz.
(
20 Hz to 20325 Hz)
Use the
UP and DOWN keys to
select your frequency. Press the
ESC to return to the EQ menu.
BANDWIDTH (better known as Q) can be set from .5 to 10 in
.5 increments. In simple terms, lower Q effects more
frequencies around the center frequency while higher Q
effects fewer frequencies around the center frequency.
Use the
UP and DOWN keys to
select your Q value. Press the
ESC
to return to the EQ menu.
21
SX .2 Series Amplifiers
Operation
BOOST/CUT is how much you want to boost or cut the
equalizer and has a range of
-18 dB to + 18 dB in .5 dB
steps.
Use the
UP and DOWN keys to
adjust each setting and the
ESC
key to return to the EQ menu.
When you are done adjusting the
EQ press the
ESC key while in the
EQ menu to return to the MAIN
menu.
NOTE...
While adjusting the EQ you will notice the
EQ indicator on
the ISIS VFD display is lit. This indicates you are in the EQ
menu.
20
SX .2 Series Amplifiers
Operation
16.) Reset Amp - This option resets all adjustable
settings back to their original factory defaults.
Use the
UP and DOWN keys to
select
SKIP RESET or DO RESET and
then press the
ENT key to perform
the selected action.
17.)
About - This menu item will display information
about the DAP (Digital Audio Processor) hardware, software
and build date.
Use the
UP and DOWN keys to
view the DSP Version, Software Version,
Hardware Version and Build Date. Press
the
ESC key to return to the MAIN
menu.
Gain MENU - Here is where you adjust your amplifier’s gain
control settings.
Press the
ENT key to enter the
GAIN menu.
Use the
UP and DOWN keys to
scroll through
LEFT channel, RIGHT
channel or BOTH options and then
press the
ENT key to select.
