772982
34
Verklein
Vergroot
Pagina terug
1/82
Pagina verder
MY20K10-02_1.0_10.11.2020 34
Operation
6.4 Error messages
The drive system monitors itself continuously and
displays a number as an error message if a known
error is detected. The system may switch off
automatically depending on the type of error.
Code Remedy
The system won't
switch on (nothing
on the display
screen)
Remove the battery from its holder and
reinsert it and plug in the connector again if
necessary.
Check the connector, contacts and contact
surfaces on the display and battery for any
dirt. Metal particles may accumulate,
particularly if the connector is magnetic.
Such particles can be difficult to remove.
Press the battery button, so that the LEDs
light up.
The battery cannot
be charged
Carefully check the charger connector and
the battery socket for any deposits. Metal
particles quickly accumulate if the connector
or socket is magnetic.
The battery cannot be charged if the ambient
temperature is <0 °C. Always charge the
battery at room temperature.
Observe the information on charging in the
charger operating instructions, particularly
the error codes.
No motor
assistance (display
in operation, motor
assistance not
available)
Remove the battery from its holder and
reinsert it. Plug the connector in again if
necessary.
Fully charge the battery once.
Turn the display downward from its holder
dock, wait about a minute and turn it back up
again.
Check that all connectors are in the right
position and check all cables for any
breakage – due to sharp kinking, for
example.
If the ambient temperature is <0 °C, the
battery cannot be charged, meaning
recovery cannot be used either.
Recovery does not
work
Is the battery charge level > 90%? Recovery
will only work if the charge level is ≤ 90%.
Is the current riding speed less than
10 km/h? Recovery is not possible below
10 km/h.
Is the current riding speed more than
40 km/h? Recovery performance is reduced
above 40 km/h.
Is the ambient temperature <0 °C? The
battery cannot be charged and cannot be
restored either at a cell temperature below
C.
The motor does not
deliver full power
The motor may have reached a high
temperature range. Power is gradually
reduced when the temperature in the
electronics is 80 °C or higher. Leave the
S pedelec to cool in the shade for about
10 minutes and then resume your ride.
As the battery voltage decreases, the power
and top speed also decrease slightly. When
the battery is almost empty, the maximum
speed can be 2-3 km/h below the level
achieved when riding with a fully charged
battery.
Table 17: List of system messages
Range seems too
short
The range depends on
»»Ride profile
»»Assistance mode
»»Tyre pressure
»»Riding performance
»»Training status
»»Total weight
»»Outside temperatures
»»Battery capacity
»»The selected trip distance
»»Charging smartphones via the display
If just one of these factors is not optimal, the
range can already be significantly reduced.
Example: If the outside temperature is 0 °C,
the range may be 30-40% less.
Code Remedy
Table 17: List of system messages
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kettler Velossi 2.0 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kettler Velossi 2.0 in de taal/talen: Engels als bijlage per email.

De handleiding is 7.33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kettler Velossi 2.0

Kettler Velossi 2.0 Gebruiksaanwijzing - Nederlands - 82 pagina's

Kettler Velossi 2.0 Gebruiksaanwijzing - Deutsch - 83 pagina's

Kettler Velossi 2.0 Gebruiksaanwijzing - Français - 84 pagina's

Kettler Velossi 2.0 Gebruiksaanwijzing - Espanõl - 85 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info