ST8200
Training with stored values
When selecting the exercise E1-E6 among the per-
sons P1-P4 the last input of the selected weight
(CountUp operation) or the training sets is displayed
with training repetitions (CountDown operation) to be
able to train immediately in the event of constant trai-
ning.
Changing the input
By means of the SET button you again call the person
storages, exercise storages, selected weights, trai-
ning sets and training repetitions and change the
flashing settings and values through the -/+ buttons.
Persons and exercise storage for
training of 2 persons
The electronics also offers the possibility to select two
persons with the storages P1P2 and the exercise stor-
ages E1E2. The input is carried out along the lines of
individual persons input.
Readiness for training of 2 persons
Only in this display state, a training of 2 persons is
displayed. The persons display is changed flashing
at intervals of 10 seconds. In the lower line, the
weight display takes turns with the time display.
For instance, P1 would like to train in CountDown
operation and P2 in CountUp operation.
Change of batteries
In case of too weak batteries Lo bAtt is indicated and
no function is carried out anymore. You should also
change the batteries in the event of poor display con-
trast and/or malfunctions.
A low battery voltage in the sender will not be reco-
gnised. If pulses are not transmitted during training
anymore, check the battery of the sender.
Malfunctions of the training computer
Press the SET button for a longer period of time
or change the batteries.
6
GB
