773015
90
Verklein
Vergroot
Pagina terug
1/125
Pagina verder
MY20K01-12_1.0_12.06.2019 90
Operation
6.14.2 Using a hub gear
Only applies to pedelecs with this equipment
.
Figure 85: Example; Shimano Nexus gear shift: twist
grip (1) for the hub gear with its screen (3), the direction of
rotation to switch up a gear (2) and the direction of
rotation to switch down a gear (4)
Turn the twist grip.
The gear shift switches the gear.
The number on the screen display shows the
changed gear.
6.14.3 Use eShift
eShift refers to the integration of electronic gear
shift systems into the pedelec system.
6.14.3.1 eShift with Shimano DI2 automatic
hub gears
Only applies to pedelecs with this equipment
You can operate the automatic Shimano DI2 hub
gears in manual mode or automatic mode. You
used the gear shift to change gears in manual
mode. In automatic mode, the shift system
changes gear automatically depending on the
speed, pedalling power and pedalling frequency.
You will find how to switch from automatic to
manual mode, depending on the shifter used,
described in your operating instructions for your
gear shift.
If you use the shifter when in automatic mode, the
gear system will change to the next gear, but it will
remain in automatic mode.
Manual gear changes in automatic mode
influence shift behaviour in your gear system and
adjust gear changes to your riding performance
since it is a self-learning system.
If the system is switched on for the first time when
a new, unused wheel is used, the system will learn
the gears first. To do so, the automatic system
changes to the highest/most difficult gear and
then switches through all gears during the first
ride. The new gear is shown briefly on the screen
each time it is changed.
Since the drive unit detects the gear shift and
consequently reduces motor assistance briefly, it
is also possible to switch gears under load or on
hills.
If the pedelec is brought to a halt from a speed
greater than 10 km, the system can automatically
switch back to a pre-set START GEAR.
You can set the START GEAR in the system
settings.
Crash caused by incorrect use
If the rider applies too much pressure on the pedals
during a gear change and activates the shifter or
changes several gears at a time, their feet may slip
from the pedals. As a result, the pedelec may flip
over or fall, which may cause injury.
Switching down several gears to a low gear may
cause the twist grip outer sleeve to suddenly come
off. This will not have an adverse effect on the twist
grip's correct functioning since the outer guide
returns to its original position after the gear change
is complete.
Apply little pressure on the pedals while changing
gears.
Never change more than one gear at a time.
Notice
The interior hub is not completely waterproof. If
water gets into the hub, it may rust and the gear
switch function may no longer function as a result.
Never use the pedelec in places where water
may get into the hub.
In rare cases, noises may be heard from the rear
derailleur in the hub interior after a gear change.
This is normal when gears are changed.
Do not detach the hub. If you need to detach it,
contact your dealer.
CAUTION
!
1
2
3
4
90

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kettler Traveller - 2020 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kettler Traveller - 2020 in de taal/talen: Engels als bijlage per email.

De handleiding is 18.53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kettler Traveller - 2020

Kettler Traveller - 2020 Gebruiksaanwijzing - Nederlands - 128 pagina's

Kettler Traveller - 2020 Gebruiksaanwijzing - Deutsch - 125 pagina's

Kettler Traveller - 2020 Gebruiksaanwijzing - Français - 131 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info