773015
39
Verklein
Vergroot
Pagina terug
1/125
Pagina verder
MY20K01-12_1.0_12.06.2019 39
Overview
Applies only to Pedelecs with eShift with NuVinci
H|Sync/ enviolo with Optimized H|Sync
Applies only to Pedelecs with eShift with Rohloff
E-14 Speedhub 500/14
3.5.5 System message
The drive system monitors itself continuously and
if an error is detected, it is indicated by a system
message. The system may switch off
automatically depending on the type of error. You
will find assistance for system messages in 8.5
First aid. There is a table of system messages in
the Appendix.
3.5.6 ABS indicator lamp
The anti-blocking system indicator lamp must light
up after the system has started up and must go
out once speed has reached about 5 km/h. If the
ABS indicator lamp does not light up when the
electric drive system starts, the ABS is defective.
An error code on the display also tells the rider
that it is defective.
If the indicator lamp does not go out after you set
off or it lights up while you are riding, this means
there is an error in the anti-blocking system. The
anti-blocking system is then no longer active. The
brake system itself remains functional. It is only
the anti-blocking system control which no longer
operates.
If the ABS indicator lamp is lit, the ABS function is
not active.
Note: You need to stop and restart the pedelec
(switch off and on again) to reactivate the anti-
blocking system.
Screen display Change
Gear calibration This is where you can perform a
calibration on the stepless gear.
Press on the Lighting button to
confirm calibration. Then follow the
instructions. You also might need
to perform a calibration while riding
in the event of a fault. In such
cases, you also press on the
Lighting button to confirm
calibration and then follow the
instructions on the display. This
menu option is only shown when
the on-board computer is
positioned in its mount
Gear vx.x.x.x: this is the gear software version.
This menu option is only shown
when the on-board computer is
positioned in its mount. This menu
option is only shown if you have an
electronic control gear.
Table 45: Changing the system settings
Screen display Change
Start gear This is where you can set the start
gear.
The automatic reset function is
switched off in Position – –. This
menu option is only shown when
the on-board computer is
positioned in its mount.
Gear vx.x.x.x: this is the gear software version.
This menu option is only shown
when the on-board computer is
positioned in its mount. This menu
option is only shown if you have an
electronic control gear.
Table 46: Changing the system settings
Notice
The anti-blocking system indicator lamp may light
up if the front and rear wheels are rotating at
widely different speeds from one another – for
example, if the rider cycles on the rear wheel only
or if a wheel is rotating for a unusually long time
without making contact with the ground (fitting
stand). The anti-blocking system switches off in
such cases.
39

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kettler Traveller - 2020 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kettler Traveller - 2020 in de taal/talen: Engels als bijlage per email.

De handleiding is 18.53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kettler Traveller - 2020

Kettler Traveller - 2020 Gebruiksaanwijzing - Nederlands - 128 pagina's

Kettler Traveller - 2020 Gebruiksaanwijzing - Deutsch - 125 pagina's

Kettler Traveller - 2020 Gebruiksaanwijzing - Français - 131 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info