6
ces for correct fit.
n Instruct children in the correct use of the product and draw their attention to possible dangers.
n Adjust the height of the saddle to the child’s height (see page 97).
n Do not transport anything on this vehicle.
n Use environmentally-friendly substances to clean this product. You must not use aggressive or corrosi-
ve substances.
n When leaving the unicycle on floors containing solvents or which have been glued with such solvents
(e.g. PVC), they may possibly stain it due to a chemical reaction with the natural rubber. If in doubt,
place some cover material underneath the wheels.
n Ensure that the air pressure in the tyres is correct (2.5 - 3,5 bar); too low an air pressure will increa-
se wear and makes riding more difficult!
Assembly of the toy vehicle
n
Please ensure that the vehicle will only be used after the assembly has been carried out correctly and
checked by an adult.
n The vehicle must be assembled carefully by an adult person. Study the assembly instructions carefully
before beginning work. Assemble the vehicle in the exact sequence shown by the letters in the dia-
grams. This is essential for the safe function and use of the scooter
n Please note that there is always a danger of injury when working with tools or doing manual work.
Therefore please be careful when assembling this machine.
n Ensure that your working area is free of possible sources of danger, for example don’t leave any tools
lying around. Always dispose packaging material in such a way that it may not cause any danger.
There is always a risk of suffocation if children play with plastic bags!
n Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten
the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against
resistance (locking device). Then check that all screw connections have been tightened firmly.
Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is
destroyed), and must be replaced.
n For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing plugs).
List of spare parts page 99
When ordering spare parts, always state the full item number, spare-partnumber, the quantity requi-
red and the S/N of the product.
Example order: item no. 08750-500 / spare-part no. 70121470 / 1 pieces / S/N ....................
Please keep original packaging of this item, so that it may be used for transport at a later date, if
necessary.
Goods may only be returned after prior arrangement and in (internal) packaging, which is safe for
transportation, in the original box if possible.
It is important to provide a detailed defect description / damage report!
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, was-
hers etc.) is required, this should be clearly stated on the order by adding the words „with fastening
material“.
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and
safely (local refuse sites).
