ST8200
Functions
Switching on the display
The display is activated by pressing the SET button. All segments
are briefly shown. Then, the selection of persons is expected with
flashing P1.
Selecting persons (P1-P4)
Select a person storage by means of the -/+ buttons and accept
it through the SET button. Then, the selection of the exercise stora-
ge is expected with flashing E1.
Selecting the exercise storage (E1-E6)
Select an exercise storage by means of the -/+ buttons and
accept it through the SET button. Then, the selection of the weight
display is expected with flashing kg or lbs.
Weight display (kg/lbs)
Select the display by means of the -/+ buttons in kg or lbs and
accept the setting through the SET button. Then, the input of the
training weight is expected with flashing value and flashing (W).
Entering the weight (W)
Enter the selected weight by means of the -/+ buttons and accept
the setting through the SET button. Then, the entering of the trai-
ning sets is expected with flashing value and flashing (S).
Selecting the training operation CountUp or
CountDown
By skipping or entering the training sets you decide, if it is trai-
ned in the CountUp operation (selected weight is added) or in
the CountDown operation (total weight is worked off).
CountDown operation
Insert the training sets (S) by means of the -/+ buttons. The selec-
ted weight is added to the training sets, equalling a total weight.
Accept the setting by means of the SET button. Then, the input of
the training repetitions is expected with flashing value and flas-
hing (R). The downward arrow indicates CountDown operation.
CountUp operation
If the input of the training sets (S) is skipped by means of the SET
button, when “0” is flashing, the kg value is added per travel by
the selected weight, equalling a total weight. The upward arrow
indicates CountUp operation. The further description can be
found under ‘Readiness for training in CountUp operation’.
Entering the training repetitions (R)
Enter the training sets (R) by means of the -/+ buttons. The selected
weight is added to the training sets and the repetitions, equalling a
total weight. Accept the setting by means of the SET button.
Note
A double beep indicates the exceeding of available training possi-
bilities which lead to the addition of more than 9,999 kg/399 lbs.
Readiness for training in CountDown opera-
tion
Only in this display state, a training in CountDown operation is
displayed and the number of travels is counted. In the lower line
the time takes turns with the weight display.
4
GB
