Kettler Ltd. ● Kettler House, Merse Road ● North Moons Moat ● Redditch, Worcestershire ● B 98 9 HL ● Great Britain
Kettler International Inc. ● 1355, London Bridge Road ● Virginia Beach, Virginia 2345 ● USA
contacts the cover again.
Finally, push both rear protection caps towards the running belt
and tighten the lateral screw connection of the toe protection
tube again.
Belt straightening:
1) Loosen the lateral screw connection of the toe protection tube
on both sides (Fig. 4.1).
2) Turn the adjusting screw to the right by max. one turn. Repeat
this process on the other side. Check as to whether the conti-
nuous belt slips. If this is the case, repeat the described pro-
cess once again.
3) Finally, push both rear protection caps towards the running
belt and tighten the lateral screw connection of the toe protec-
tion tube again.
Be very careful when adjusting and straightening the belt. An
extreme over- or under-tension may damage the running belt !
Belt adjustment:
Adjust the belt while running it at a speed of about 6 km/h
(if necessary, less). No person must be on the belt while adju-
sting it!
If the white strip moves to the right or to the left, loosen the lateral
screw connections of the toe protection tube on both sides (Fig.
4.1) such that the rear locking screws can be displaced easily.
If the strip moves to the right, carefully turn the right adjusting
screw (Fig. 4.2) clockwise by max. a quarter of a rotation with
the enclosed socket spanner. Operate the belt and check the
course of the white strip. Repeat this process until the strip contac-
ts the cover again.
If the strip moves to the left, carefully turn the right adjusting
screw (Fig. 4.2) counter-clockwise by max. a quarter of a rotati-
on with the enclosed socket spanner. Operate the belt and check
the course of the white strip. Repeat this process until the strip
textmarks
Assembly Instructions
GB
technical marks
Care and Maintenance
■ Do not use corrosive or abrasive materials to clean the equip-
ment. Ensure that such materials are not allowed to pollute the
environment.
■ The electrical elements and components do not require mainte-
nance. No alterations or repairs should be made to these parts
unless by a qualified electrician.
■ When ordering spare parts, always state the full article number,
spare-part number, the quantity required and the inspection
number stamped on the back.
Example order: Art. no. 7892-600 / spare-part no. 10100102 /
1 pieces / inspection no......
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
schould be clearly stated on the order by adding the words „with
fastening material“.
Running belt „OLYMPIC“, Art. No. 7892-600
■ Sturdy frame of steel tubing and aluminium profiles which can
be folded together to save space
■ Mechanical inclination angle adjustment
■ Low-vibration running surface 125 x 40 cm
■ Electric motor 1,1 kW
■ Walking and running speeds between 1 and 12 km/h
■ Transport castors at front
■ Training computer: time measurement, training distance, calorie
consumption, speed, pulse measurement, recovery-pulse mea-
surement with fitness mark from 1-6, numerous possible settings
for exercising data
■ Running belt stop trip
■ Electronic safety system to guard against sudden belt accelera-
tion or deceleration
■ Dimensions: length=165 cm, width=70 cm, height=143 cm
(70x70x150 cm)
H
Instructions for Assembly
■ Assembly must be carried out carefully by an andult.
■ Strictly follow the individual mounting steps to ensure a safe use
and operation of the unit.
■ Carefully read these mounting instructions before beginning with
the work itself. The individual steps are additionally explained in
the sequenz of figures by means of symbols, in some cases a
text mark indicates that a written explanations is available.
For Example:
Read the additional text under ther letter indicated
H
