4
List of spare parts
When ordering spare parts, always state the full article number, spare
partnumber, the quantity required and the S/N of the product.
Example order:Art. no. 07867-700 / spare-part no. 68000400/
1 pieces / S/N no......
Important: spare part prices do not include fastening material; if fastening material
(bolts, nuts, washers etc.) is required, this should be clearly stated on the order
by adding the words „with fastening material“.
KETTLER (GB) Ltd. · Merse Road · North Moons Moat · Redditch,
Worcestershire B98 9HL · Great Britain
KETTLER International Inc. · 1355, P. O. Box 2747 · Virginia Beach
· VA 23450 USA
http://www.kettler.de
Messhilfe für Verschraubungsmaterial / Measuring help for screw connections
A slight production of noise at the bearing of the centrifugal
mass is due to the construction and has no negative effect upon
operation. Possibly occurring noise during reverse pedalling
result from engineering and are absolutely safe.
Do not use corrosive or abrasive materials to clean the equipment.
Ensure that such materials are not allowed to pollute the envi-
ronment.
The crosstrainer has a magnetic brake system.
To operate correctly, the pulse function requires a minimum
voltage of 2,7 volts (only for computers working with batteries).
The equipment is dependent of revolutions per minute.
Please ensure that liquids or perspiration never enter the machine
or the electronics.
Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
Always wear suitable shoes when using.
All electric appliances emit electromagnetic radiation when in ope-
ration. Please do not leave especially radiation-intensive appli-
ances (e.g. mobile telephones) directly next to the cockpit or the
electronic controlsystem as otherwise values displayed might be
distorted (e.g. pulse measurement.
Instructions for Assembly
Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
Please note that there is always a danger of injury when working
with tools or doing manual work. Therefore please be careful when
assembling this machine.
Ensure that your working area is free of possible sources of
danger, for example don’t leave any tools lying around. Always
dispose packaging material in such a way that it may not cause any
danger. There is always a risk of suffocation if children play with
plastic bags!
The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
Bolt all the parts together loosely at first, and check that they have
been assembled correctly. Tighten the locknuts by hand until resi-
stance is felt, then use spanner to finally tighten nuts completely
against resistance (locking device). Then check that all screw
connections have been tightened firmly. Attention: once locknuts
have been unscrewed they no longer function correctly (the
locking device is destroyed), and must be replaced.
For technical reasons, we reserve the right to carry out preliminary
assembly work (e.g. addition of tubing plugs).
