4
extension cable is being used, ensure that it complies with the
VDE regulations.
■ When the unit is not in use, unplug it from the power supply.
■ Ensure that the power cable is not pinched and that no-one can
trip over it.
■ All electric appliances emit electromagnetic radiation when in oper-
ation. Please do not leave especially radiation-intensive appliances (e.g.
mobile telephones) directly next to the cockpit or the electronic con-
trolsystem as otherwise values displayed might be distorted (e.g.
pulse measurement).
■ Before beginning your program of exercise, consult your doctor
to ensure that you are fit enough to use the equipment. Base your
program of exercise on the advice given by your doctor. Incorrect
or excessive exercise may damage your health!
■ Any interference with parts of the product that are not described within
the manual may cause damage, or endanger the person using this
machine. Extensive repairs must only be carried out by KETTLER service
staff or qualified personnel trained by KETTLER.
■ Always observe the general safety rules and precautions for
working with electrical equipment.
■ Before beginning your program of training, study the instructions
for training carefully.
■ Our products are subject to a constant innovative quality assurance.
We reserve the right to perform technical modifications.
■ In case of enquiry, please contact your KETTLER dealer.
■ In choosing the location of the apparatus, ensure a sufficient
safety distance from any obstacles. The apparatus must not be
mounted in the immediate vicinity of main passageways (paths,
doorways, corridors).
■ For a comfortable training position please adjust the handlebar
andsaddle position to your body height.
Instructions for Assembly
■ Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
■ Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the
diagrams. The correct sequence is given in capital letters.
■ The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
■ Please note that there is always a danger of injury when working
with tools or doing manual work. Therefore please be careful
when assembling this machine.
■ Ensure that your working area is free of possible sources of danger, for
example don’t leave any tools lying around. Always dispose
packaging material in such a way that it may not cause any danger.
There is always a risk of suffocation if children play with plastic bags!
■ The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
■ Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function cor-
rectly (the locking device is destroyed), and must be replaced.
■ For technical reasons, we reserve the right to carry out
preliminary assembly work (e.g. addition of tubing plugs).
■ Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
List of spare parts
When ordering spare parts, always state the full article number, spare
partnumber, the quantity required and the S/N of the product.
Example order: Art. no. 07690-000 / spare-part no. 10100030/
2 pieces / S/N no......
Important: spare part prices do not include fastening material; if fastening
material (bolts, nuts, washers etc.) is required, this should be clearly stated
on the order by adding the words „with fastening material“.
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please
dispose of this article correctly and safely (local refuse sites).
KETTLER (GB) Ltd. · Merse Road · North Moons Moat · Redditch,
Worcestershire B98 9HL · Great Britain
KETTLER International Inc. · P. B. 2747 · Virginia Beach · VA 23450
-2747USA
http://www.kettler.net
Handling the equipment
■ Before using the equipment for exercise, check carefully to
ensure that it has been correctly assembled.
■ It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
■ The machine is designed for use by adults and children should
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the
manufacturer cannot be held liable. If, in spite of this, children
are allowed to use the equipment, ensure that they are
instructed in its proper use and supervised accordingly.
■ The exercise cycle complies with the DIN EN 957 - 1/5, class
SA. It is therefore suitable for therapeutic use.
■ Before beginning your first training session, familiarize
yourself thoroughly with all the functions and settings of the
unit.
■ A slight production of noise at the bearing of the centrifugal
mass is due to the construction and has no negative effect
upon operation. Possibly occurring noise during reverse
pedalling result from engineering and are absolutely safe.
■ The exercise cycle has a magnetic brake system.
■ The equipment is independent of revolutions per minute.
■ Please ensure that liquids or perspiration never enter the
machine or the electronics.
■ Before use, always check all screws and plug-in connections
as well as respective safety devices fit correctly.
■ Always wear suitable shoes when using.
■ Do not use corrosive or abrasive materials to clean the
equipment. Ensure that such materials are not allowed to
pollute the environment.
■ The product is not suitable for use by persons weighing over 180
kg.
