6
How to handle
■ Make sure that usage does not commence until the apparatus has been properly assem-
bled and subsequently controlled by an adult.
■ Instruct children on the proper handling of the apparatus and advise them of possible dangers.
■ Remember that the children's natural play instinct and temper may lead to unforeseeable
situations excluding a responsibility of the manufacturers.
■ Although dangers to children during proper use of the apparatus are highly unlikely, all
play on the apparatus should be monitored by an adult.
■ For cleaning and caring the swing only use environmentally friendly and no aggressive or
corroding agents.
■ Regularly grease the moving parts with some drops of oil.
Instructions for Assembly
■ Ensure that you have received all the parts required (see check list) and that they are un-
damaged. Should you have any cause for complaint, please contact your KETTLER dealer.
■ Before assembling the equipment, study the drawings carefully and carry out the opera-
tions in the order shown by the diagrams. The correct sequence is given in capital letters.
■ The fastening material required for each assembly step is shown in the diagram inset. Use the
fastening material exactly as instructed. The required tools are supplied with the equipment.
■ The equipment must be assembled with due care by an adult person. If in doubt call upon
the help of a second person, if possible technically talented.
■ Please note that there is always a danger of injury when working with tools or doing man-
ual work. Therefore please be careful when assembling this machine.
■ Ensure that your working area is free of possible sources of danger, for example don’t leave
any tools lying around. Always dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if children play with plastic bags!
■ Bolt all the parts together loosely at first, and check that they have been assembled cor-
rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tight-
en nuts completely against resistance (locking device). Then check that all screw connec-
tions have been tightened firmly. Attention: once locknuts have been unscrewed they no
longer function correctly (the locking device is destroyed), and must be replaced.
■ For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).
■ Waste Disposal: KETTLER products are recyclable. At the end of its useful life please dis-
pose of this article correctly and safely (local refuse sites).
List of spare parts
When ordering spare parts, always state the full article number, spare-partnumber, the quan-
tity required and the S/N of the product (see spare parts drawing).
Example order: Art. no. 08311-400 / spare-part no. 10100016 / 2 pieces / S/N......
Assembly Instructions
GB
