3
Assembly Instructions
GB
For Your Safety:
■ Exercise should be used only for its intended purpose, i.e. for physical
exercise by adult persons.
■ Any other use of the equipment is prohibited and may be dangerous.
The manufacturer cannot be held liable for damage or injury caused by
improper use of the equipment.
■ Exercise has been designed in accordance with the latest standards of
safety. Any features which may have been a possible cause of injury
have been avoided or made as safe as possible
.
■
Incorrect repairs and structural modifications (e.g. removal or replace-
ment of original parts) may endanger the safety of the user.
■ Damaged components may endanger your safety or reduce the lifetime
of the equipment. For this reason, worn or damaged parts should be re-
placed immediately and the equipment taken out of use until this has
been done. Use only original KETTLER spare parts.
■ In case of enquiry, please contact your KETTLER dealer.
■ If the equipment is in regular use, check all its components thoroughly
every 1 -2 months. Pay particular attention to the tightness of bolts and
nuts.This applies especially to the securing bolts for saddle and handel-
bars. The brake tension should also be checked at regular intervals and
adjusted as necessary.This applies especially to the securing bolts for
saddle and handelbars.
■ Instruct persons using the equipment (in particular children) on possible
sources of danger during exercising.
■ Before beginning your program of exercise, consult your doctor to en-
sure that you are fit enough to use the equipment. Base your program of
exercise on the advice given by your doctor. Incorrect or excessive ex-
ercise may damage your health.
Before assembling or using the exercise cycle , please read the following instructions carefully. They contain important
information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a
safe place for maintenance purposes or for ordering spare parts.
Handling the equipment
■ Before using the equipment for exercise, check carefully to ensure that it
has been correctly assembled.
■ It is not recommended to use or store the apparatus in a damp room as
this may cause it to rust. Please ensure that no part of the machine comes
in contact with liquids (drinks, perspiration etc.). This may cause corro-
sion.
■ The Hometrainer is designed for use by adults and children should not
be allowed to play with it. Children at play behave unpredictably and
dangerous situations may occur for which the manufacturer cannot be
held liable. If, in spite of this, children are allowed to use the equipment,
ensure that they are instructed in its proper use and supervised accord-
ingly.
■ The exercise cycle complies with the DIN EN 957 - 1/5, class B. It is
therefore unsuitable for therapeutic use.
■ On principle, the equipment does not require any special maintenance.
All bearings are pre-lubricated (further lubrication is not required) and
require little maintenance.
■ Do not use corrosive or abrasive materials to clean the equipment.
Ensure that such materials are not allowed to pollute the environment.
■ To operate correctly, the pulse function requires a minimum voltage of
2,7 volts.
■ The hometrainer is dependent of revolutions per minute.
■ Please ensure that liquids or perspiration never enter the machine or the
electronics.
■ Before use, always check all screws and plug-in connections as well as
respective safety devices fit correctly.
Instructions for Assembly
■ Ensure that you have received all the parts required (see check list) and
that they are undamaged. Should you have any cause for complaint,
please contact your KETTLER dealer.
■ Before assembling the equipment, study the drawings carefully and car-
ry out the operations in the order shown by the diagrams. The correct se-
quence is given in capital letters.
■ The equipment must be assembled with due care by an adult person. If
in doubt call upon the help of a second person, if possible technically tal-
ented.
■ Please note that there is always a danger of injury when working with
tools or doing manual work. Therefore please be careful when assem-
bling this machine.
■ Ensure that your working area is free of possible sources of danger, for
example don’t leave any tools lying around. Always dispose packaging
material in such a way that it may not cause any danger. There is always
a risk of suffocation if children play with plastic bags!
■ The fastening material required for each assembly step is shown in the
diagram inset. Use the fastening material exactly as instructed. The re-
quired tools are supplied with the equipment.
■ Bolt all the parts together loosely at first, and check that they have been
assembled correctly. Tighten the locknuts by hand until resistance is felt,
then use spanner to finally tighten nuts completely against
resistance (locking device). Then check that all screw connections
have been tightened firmly. Attention: once locknuts have been un-
screwed they no longer function correctly (the locking device is de-
stroyed), and must be replaced.
■ For technical reasons, we reserve the right to carry out preliminary as-
sembly work (e.g. addition of tubing plugs).
■ Please keep original packaging of this article, so that it may be used for
transport at a later date, if necessary.
List of spare parts
When ordering spare parts, always state the full article number, spare-part
number, the quantity required and the inspection number stamped on the
back.
Example order: Art. no. 07948 - 760 / spare-part no. 10100030/ 2
pieces / inspection no......
Important: spare part prices do not include fastening material; if fastening
material (bolts, nuts, washers etc.) is required, this should be clearly stated
on the order by adding the words „with fastening material“.
KETTLER (GB) Ltd. · Merse Road · North Moons Moat · Redditch,
Worcestershire B98 9HL · Great Britain
KETTLER International Inc. · 1355, P. B. 2747 · Virginia Beach · VA 23450
USA
http://www.kettler.net
