Description
The electronics assembly has the following functions:
• 2 personal memories for:
Training kilometres and time
Training presettings
Display of last training with average and maximum va-
lues
• KJoule/km/h or kcal/m/h settings
• Calculation of energy consumption depending on speed
and braking level
Function range
The five buttons will be described in short below.
DISP-SET (press shortly)
• Switches from time display to ready for training.
• Switches to next input or display.
Settings or values will be accepted.
Settings or values will be accepted.
DISP-SET (press longer) RESET
• Deletes display for a reset.
Only possible in standstill.
Minus – / Plus +
With these function buttons, you can change the values in
the different input data before the start of the training
• Press longer > fast run through the values
• Press “Plus” and “Minus” together: input data will be
reset )
Minus – (press shortly when time is displayed)
• Display of last training data (MEM) and total kilometres
(ODO)
Minus – (press longer when time is displayed)
• Set time (TIME)
• Switch from ME to IM (SETTINGS)
ME = [24h], [KJoule], [kilometres] -display
IM = [12h], [Kcal], [miles] -display
• Activate Save training presettings.
REC (recovery pulse with fitness mark)
By pressing this function button, the recovery pulse function
is started and a fitness grade is calculated.
Persons
• Display of training kilometres and time of person 1 or
person 2.
• Display of previous training data.
Measuring the pulse
The measurement of the pulse can be carried out by means
of 3 sources:
1. Ear clip - The plug is put into the socket.
2. Chest strap without plug-in. In this electronic unit, the re-
ceiver is built in behind the display. A plugged-in ear
clip must be removed. The Polar chest strap is available
as an accessory (item no. 67002000).
3. Hand pulse - The connection is situated at the back of
the display;
FB601/610
13
GB
G
G
