XD-9581MD (En)
68
Preparation sectionBasic sectionApplication sectionKnowledge sections
Effective sound field and sound quality adjustment
Input level adjustment
Balance adjustment
Each press switches the modes as follows.
1 Strength of the SRS 3D stereo effect (LEVEL)
2 Spectrum analyzer display switching (DISPLAY)
3 Left and right volume balance
Return to volume adjustment is made
when no input is made for 4 sec. or more.
÷ “LEVEL” is displayed only when SRS 3D is ON.
Adjustment of balance and input level
Balance .......... Adjusts the balance of left and right volume.
Input level ..... This adjusts the volume from external equipment connected to the AUX input terminal (video deck etc.) and
from external equipment connected to the TAPE PLAY terminal (tape deck etc.). Adjust as required when the
volume from the external equipment is too high.
The level
decreases.
The level
increases.
The right volume
is decreased.
The left volume
is decreased.
Indicates the center.
Indicates the balance setting.
Set level
÷ Adjustment is possible over the range from -5 to 0.
When the input level is adjusted, the recording level from
the external equipment connected to the AUX input termi-
nal or the TAPE PLAY terminal also changes.
“Recording on MD”
•
1Select balance adjustment.
2Adjust.
1Select TAPE adjustment or AUX ad-
justment.
2Adjust.
Press either one twice and go to step 2
within 4 seconds.
VOLUME CONTROL
DOWN UP
AUX MD TAPE
TUNING
UP
DOWN
M
O
D
E
