XD SERIES (En/E2)
65
Preparation section Basic section Application section Knowledge sections
Timer operation
Adjust the clock before setting the timer.
Operate easy To use Timer (O.T.T.)
Playback of the selected input source starts at the specified time, and the power is switched off after one hour. This timer
operates only once directly after setting.
Sleep timer (SLEEP)
The power is turned OFF automatically after the specified period has elapsed.
Timer playback, timer recording (PROG.1, PROG.2)
With each of the two timer programs, a selected source can be played (or radio broadcast can be recorded) in the previously set
time period.
AI timer playback (PROG.1, PROG.2)
The volume increases gradually until the factory-set level.
Operate easy To use Timer
(Operate easy To use Timer : O.T.T.)
Sleep timer
(SLEEP)
Set the number of minutes after which the power is to be turned OFF.
2Set the time.
Adjust the clock before setting the timer.
1Turn the power ON.
SLEEP
Lights
X
SLEEP O.T.T. ECHO P.B.C.
EQ.
ON
MANU.
Duration for sleep timer
Timer playback can be set with a simple operation of just setting the time. With this function, the last source selected before
turning power off can be played by the timer. The power turned ON by the timer is switched off automatically in an hour after
the timer playback starts.
÷ The power is turned OFF automatically after the set time has elapsed.
÷ Each press decreases the time by 10 minutes. The maximum time that
can be set is 90 minutes.
Turn the power OFF or press the SLEEP key until the sleep
time is cancelled.
To cancel
90=80=70...30=20=10=Cancel=90=80...
1Select the desired source and adjust
the volume.
2Press the O.T.T. key.
The program timer does not operate until O.T.T.
operation has ended.
÷ The ON time can be set in steps of 5 minutes.
÷ When the O.T.T. timer is used simultaneously with another timer
function, the last operated input source will be played.
÷ The O.T.T. timer can be set even while the power is OFF.
O.T.T
3Set the ON time.
4Press the ENTER key.
ENTER
Press the O.T.T key twice.
To cancel
TUNING
UP
DOWN
5 Switch OFF the power supply.
÷ At the time of tape playback by timer operation, the B deck has priority.
÷ For the systems including the DP-MH5: Timer playback of a CD is
possible only with the CD loaded in tray No. 1.
÷ The input source and ON time are displayed when the O.T.T. key is
pressed.
Each press switches the modes as follows.
1 O.T.T. lit ..........Timer can be used.
2 O.T.T. not lit ...Timer is not used.
