XD SERIES (En/E2)
57
Preparation section Basic section Application section Knowledge sections
3
1
Start edit recording.
Select the disc. (DP-MH5 only)
2
Go to step 3 before playback starts.
Recording preparations are required.
¤ ¤
¤ ¤
¤ For the reverse mode, select “”” ,“[” (two-way recording).
The tune interrupted at the end of tape side A is faded out
and side B starts with fading in from the middle of that
tune. The tune interrupted at the end of tape side B is sim-
ply faded out.
Fading in/out sound at tape reversal positions
(Fade edit recording)
When equalizer, SRS 3D or another effect is applied
to the sound, the sound with the applied effect can
be recorded.
OP
Convenient CD recording
DISC SKIP
O p π
CCRS
÷ The recording level and bias will be adjusted automatically in approx. 60
seconds (variable depending on CD contents), after which recording
starts.
÷ The CD tracks are recorded in the order they are recorded on the CD.
÷ The tape and CD stop automatically when recording has completed.
Press so that the “PGM” indicator goes off.
If your system includes the DP-H5, skip to step 3 below.
Selected disc No.
P.MODE
Should be OFF.
CCRS
REC / ARM
1. When the CCRS key is pressed during playback of CD, the playback stops and the CCRS setting (preparing edited recording) starts.
2. Edit recording is not possible with CDs containing a track that is longer than one tape side, which may occur with classical music, etc.
3. If the deck is set for one-side recording (“), the processing at the tape end is applied only on side A.
4. When the last tune of tape side B is faded out, the ending part of the last but one tune may sometimes be faded out if the space between
it and the last tune is short.
During recording: X-H5
Blinks Lights
Notes
Notes
