163611
17
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
KRC-259R
KRC-159RG
KRC-159RA
KRC-21R
KRC-11RA
KRC-11RG
© B64-1188-00 (EN)
CASSETTE RECEIVER
INSTRUCTION MANUAL
Contents
English
— 2 —
Before use
Safety precautions ........................................................................3
Buttons and Display
Basic operations............................................................................5
Tuner features...............................................................................5
RDS features.................................................................................6
Cassette player features ...............................................................6
Disc changer control features .......................................................7
Other features...............................................................................7
Basic operations
Power............................................................................................8
Switching Modes ..........................................................................8
Volume..........................................................................................8
Attenuator .....................................................................................8
Loudness ......................................................................................8
Menu System................................................................................9
Tuner features
Selecting Tuning Mode ...............................................................10
Tuning .........................................................................................10
Local Seek Function....................................................................10
Monaural Reception....................................................................10
Station Preset Memory...............................................................11
Auto Memory Entry.....................................................................11
RDS features
RDS (Radio Data System) ...........................................................12
EON (Enhanced Other Network).................................................12
Alarm...........................................................................................12
AF (Alternative Frequency) Function...........................................12
Restricting RDS Region (Region Restrict Function) ....................12
Traffic Information Function........................................................13
Auto TP Seek Function................................................................13
Presetting Volume for Traffic Information/News ........................14
News Bulletin Function with PTY News Timeout Setting...........14
Programme Type (PTY) Function ................................................15
Cassette player features
Playing Cassette Tapes...............................................................16
Fast Forwarding and Rewinding Cassette Tapes........................16
Tuner Call Function .....................................................................16
Disc changer control features
Playing Discs Using Disc Changer ..............................................17
Switching Display for Discs.........................................................17
Fast Forwarding and Reversing Disc Play...................................17
Track Search................................................................................17
Disc Search .................................................................................18
Track / Disc Repeat Function ......................................................18
Track Scan Function....................................................................18
Disc Scan Function......................................................................18
Random Play Function ................................................................19
Magazine Random Play Function................................................19
Presetting Disc Names ...............................................................20
Other features
Audio Control Setting..................................................................21
Clock Display...............................................................................21
Adjusting Time ............................................................................21
TEL Mute Function......................................................................21
Selectable Illumination ................................................................22
DSI (Disabled System Indicator)..................................................22
Theft Deterrent Faceplate...........................................................22
Installation
Accessories.................................................................................23
Installation Procedure..................................................................23
Connecting Cables to Terminals .................................................24
Installation...................................................................................25
Troubleshooting guide .......................................................27
Specifications.........................................................................30
Safety precautions
— 3 —
To prevent injury and/or fire, take the
following precautions:
Insert the unit all the way until it is fully
locked in place. Otherwise it may fly out of
place during collisions and other jolts.
When extending the ignition, battery or
ground cables, make sure to use automotive-
grade cables or other cables with an area of
0.75mm
2
(AWG18) or more to prevent cable
deterioration and damage to the cable coat-
ing.
To prevent short circuits, never put or leave
any metallic objects (e.g., coins or metal
tools) inside the unit.
If the unit starts to emit smoke or strange
smells, turn off the power immediately and
consult your Kenwood dealer.
Be careful not to drop the unit or subject it to
strong shock.
The unit may break or crack because it con-
tains glass parts.
Do not touch the liquid crystal fluid if the LCD
is damaged or broken due to shock. The liq-
uid crystal fluid may be dangerous to your
health or even fatal.
If the liquid crystal fluid from the LCD con-
tacts your body or clothing, wash it off with
soap immediately.
2WARNING
To prevent damage to the machine,
take the following precautions:
Make sure to ground the unit to a negative
12V DC power supply.
Do not open the top or bottom covers of the
unit.
Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
Do not set the removed faceplate or the face-
plate case in areas exposed to direct sunlight,
excessive heat or humidity. Also avoid places
with too much dust or the possibility of water
splashing.
Do not subject the faceplate to excessive
shock, as it is a piece of precision equipment.
To prevent deterioration, do not touch the
terminals of the unit or faceplate with your
fingers.
When replacing a fuse, only use a new one
with the prescribed rating. Using a fuse with
the wrong rating may cause your unit to mal-
function.
To prevent short circuits when replacing a
fuse, first disconnect the wiring harness.
During installation, do not use any screws
except for the ones provided. The use of
improper screws might result in damage to
the main unit.
2CAUTION
IMPORTANT INFORMATION
You cannot connect the unit directly to the
following CD automatic changers. For users
who want to use older changers with the
unit, follow the directions below according to
the type of changer you own:
KDC-C200 / KDC-C300 / KDC-C400
Use the extension cable and the control box
attached to the CD changer, and the optional
CA-DS100 converter cable.
KDC-C301 / KDC-C600 / KDC-C800 / KDC-C601 /
KDC-C401
Use the extension cable attached to the CD
changer, and the optional CA-DS100 convert-
er cable.
C705i / C705si
Use the extension cable attached to the CD
changer, and the optional CA-K300 converter
cable.
KDC-C100 / KDC-C302 / C205 / C705 /
non-Kenwood CD changers
Cannot be used with this model.
You can damage both your unit and
the CD changer if you connect them
incorrectly.
2CAUTION
Safety precautions
English
— 4 —
If you experience problems during installa-
tion, consult your Kenwood dealer.
If the unit does not seem to be working right,
try pressing the reset button first. If that does
not solve the problem, consult your Kenwood
dealer.
NOTE
MW/LW
MENU
LOUD
Reset button
Cleaning the Unit
If the front panel gets dirty, turn off the
power and wipe the panel with a dry silicon
cloth or soft cloth.
Do not wipe the panel with a stiff cloth or a
cloth dampened by volatile solvents such as
paint thinner and alcohol. They can scratch
the surface of the panel and/or cause the
indicator letters to peel off.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get
dirty, wipe them with a dry, soft cloth.
2CAUTION
Cleaning the Tape Head
After you have used the tape player many
times over a long period, magnetic powder
from the tapes and dust accumulates on the
tape head, causing noise and a deterioration
in sound quality. Clean the tape head using a
cleaning tape or cleaning kit designed for use
in car audio systems.
Handling Cassette Tapes
Do not play a cassette whose tape has gone
slack. In such a case, wind it tight using a
pencil or the like in one of the spools. Playing
slack cassette tapes can result in the tape
tangling around the capstan and/or pinch
rollers, causing trouble.
Do not play a deformed cassette or one
whose label is starting to come off, as it can
cause the unit to malfunction.
Do not leave tapes in hot places, such as
above the fascia panel (dashboard) and other
spots exposed to direct sunlight, or near
heater outlets. They can deform the cassette.
Avoid using extremely long cassette tapes,
such as 100-minute-long tapes. Such tapes
are very thin, and can tangle easily around
the pinch rollers or other parts inside the unit,
causing unit failure.
Remove a cassette tape from the unit when
not listening to it for a whilst. If you leave a
tape in the unit too long, it may stick to the
tape head and cause unit malfunction.
Buttons and Display
— 5 —
MW/LW
MENU
LOUD
SRC
#1-6 MENUAMFM
¢4
ST indicater
Frequency
MONO indicator
MW/LW
MENU
LOUD
u d
SRC/
PWR OFF
ATT LOUD/MENU
¢4
AMFM
Basic operations
ATT indicator
LOUD indicator
Tuner features
Band display
LO.S indicator
Preset Station Number
AUTO indicater
Buttons and Display
English
— 6 —
MW/LW
MENU
LOUD
SRC
#1-6 MENU
CLK
TI/
VOL ADJ
AM FM
¢4
TA indicator
EON indicator
RDS features
TP indicator
AF indicator
TI indicator
REG indicator
NEWS indicator
PTY indicator
MW/LW
MENU
LOUD
SRC
0
T.C
FFREW
Cassette player features
Tape indicator
T.C indicator
— 7 —
MW/LW
MENU
LOUD
u d
SRC/
PWR OFFAUD
AMFM MENUCLK
¢4
MW/LW
MENU
LOUD
SRC
M.RDMD.SCNREPRDMSCNDISP NAME SET
DISC– DISC+
¢4
Disc changer control features
Disc indicator
Track number
Disc number
Other features
REP indicator
SCN indicator
RDM indicator
Clock display
Function of the KRC-259R,21R
Track time
Basic operations (See page 5)
English
— 8 —
Power
Turning on the power:
Press the SRC button.
Turn the power on before carrying out the following procedures.
Turning off the power:
Hold down the PWR OFF button for one second or more.
Selecting the standby mode:
Press the SRC button repeatedly to select to "ALL OFF".
When "ALL OFF" is displayed, the standby mode is turned on.
The standby mode turns all functions off although leaving the
unit’s power on. Use this mode when you want to have the
display illuminated but do not want to listen to anything.
NOTE
Switching Modes
Switching Modes:
Each time you press the SRC button, the mode switches as
follows:
Tuner mode
Tape mode
Disc changer mode
Standby mode
The mode switches to the next mode from any mode which can-
not be used.
NOTE
Volume
Increasing Volume:
Press the u button to turn up the volume.
Decreasing Volume:
Press the d button to turn down the volume.
Attenuator
This function allows you to turn down the volume quickly.
Turning Attenuator On/Off:
Press the ATT button to switch the attenuator on and off.
When the attenuator is on, the ATT indicator blinks.
When the attenuator is off, the volume returns to the original
level.
Turning down the volume all the way turns off the attenuator
function.
NOTE
Loudness
This function amplifies low and high tones when the volume
is turned down.
The LOUD indicator lights up, when the loudness function is
on.
Turning Loudness On/Off:
Press the LOUD button to switch the loudness on and off.
The AF function can be turned on or off even when the standby
mode has been turned on. If the power is on, the AF function
tunes in to stations that offer good reception.
NOTE
— 9 —
Make sure to end the menu mode when finished. If you fail to
end the menu mode, several functions may not operate proper-
ly, including the Traffic Information function, the News Bulletin
function with PTY news timeout setting, and the Alarm func-
tion.
Some tuner functions will not be displayed unless you are cur-
rently listening to the tuner.
Functions marked with an asterisk (*) cannot be used during
AM reception.
The News function turns on when the setting is made for the
news interruption interval. The "00M" display indicates the set-
ting selected for the news interruption timeout interval.
NOTE
(KRC-259R/21R/159RA,RG)
DSI ON DSI OFF
↑↓(KRC-259R/21R)
COL GRN COL AMB
↑↓
NEWS 00M NEWS OFF
↑↓
LO.S ON LO.S OFF
↑↓
AUTO MANUAL
↑↓
A-MEMORY (start)
↑↓
AF ON AF OFF
↑↓
REG ON REG OFF
↑↓
ATPS ON ATPS OFF
↑↓
MONO ON MONO OFF
↑↓
PTY (PTY mode entered)
Menu System
To accommodate a greater number of functions, a menu sys-
tem has been employed for making settings. Press the MENU
button to enter the menu mode and then display the function
to make the setting. Details on each setting are explained
separately in the corresponding function page.
Hold down the MENU button for one second or more.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
Selecting function to set
Press the ¢ button to search through the functions until you
see the one you want to adjust in the display.
Press the 4 button to search through the functions back-
ward.
Example: If you want to switch the tuning mode from manual
to automatic, first search through the functions until
you see "MANUAL" in the display.
Changing setting for currently displayed function
Press either the AM or FM button.
The setting will change for each function.
Example: The tuning mode will switch from manual to auto-
matic, and "AUTO" is displayed.
With the programme type function and the auto memory func-
tion, the function will start to activate.
To use the auto memory function, hold down either the AM or
FM button for two seconds or more.
Ending the menu mode
Press the MENU button.
4
NOTE
3
2
1
Function
Varieties of settings for
each function (display)
Disabled System Indicator
Selectable Illumination
News Bulletin Function
Local seek
Selecting Tuning Mode
Auto Memory Entry
*AF Function
*Region Restrict Function
*Auto TP Seek
*Monaural Reception
*Programme Type
Tuner features (See page 5)
English
— 10 —
Selecting Tuning Mode
Select which tuning mode — auto seek or manual — to use as
the default.
When the AUTO indicator is on, auto seek tuning is selected.
When the indicator is off, manual tuning is selected.
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the tuning function
appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "AUTO" or "MANUAL" in the
display, indicating auto seek or manual tuning, respectively.
Switching settings
Press either the AM button or FM button to switch the tuning
mode.
The display and setting will change.
Press the MENU button to end the menu mode.
4
3
2
1
Tuning
Press the SRC button repeatedly until tuner mode is obtained.
"TUNER" is displayed only when the tuner mode is selected.
Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2 and FM3.
Press the AM button to select the MW and LW bands.
Auto Seek Tuning
Press the ¢ button to seek increasing frequencies.
Press the 4 button to seek decreasing frequencies.
Manual Tuning
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
The ST indicator lights up when stereo broadcasts are being
received.
NOTE
3
2
1
With the local seek function turned on, auto seek tuning skips
stations with relatively poor reception.
Turning Local Seek Function On/Off:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the local seek function
appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "LO.S ON" or "LO.S OFF" in
the display, indicating that the local seek function is on or off,
respectively.
Switching settings
Press either the AM button or FM button.
The display and setting will change.
When local seek function is on, the LO.S indicator is turned on.
Press the MENU button to end the menu mode.
4
3
2
1
Local Seek Function
When poor stereo reception is experienced, this function will
reduce noise and improve listening conditions.
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the monaural reception
function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "MONO ON" or "MONO
OFF" in the display, indicating that monaural reception is on or
off, respectively.
Switching settings
Press either the AM button or FM button.
The display and setting will change.
When monaural reception is on, the MONO indicator turns on.
Press the MENU button to end the menu mode.
4
3
2
1
Monaural Reception
Disc changer control features (See page 7)
Function of the KRC-259R,21R
— 17 —
Playing Discs Using Disc Changer
Playing Discs:
Press the SRC button repeatedly until disc changer mode is
obtained.
"DISC" is displayed when the unit is in the disc changer mode.
The disc indicator lights up during disc changer mode.
When one disc has finished playing its last track, the next disc
in the changer starts playing. When the last disc in the changer
has finished, the player returns to the first disc and starts play-
ing it.
Disc #10 is displayed as "0".
Switching Display for Discs
Switch the display that appears whilst discs are playing.
Switching Display for Discs:
Each time you press the DISP button, the display during disc
play switches as follows.
Track time/track no.
Disc name
Disc title (MD only)
Track title (MD only)
You can give names to discs through the presetting disc name
function (see p. 20).
If you try to display the name of a disc that does not have one,
"NO NAME" is displayed instead.
NOTE
Fast Forwarding and Reversing Disc Play
Fast Forwarding Disc Play:
Hold down on the ¢ button.
Release your finger to play the disc at that point.
Reversing Disc Play:
Hold down on the 4 button.
Release your finger to play the disc at the point.
You cannot use reverse play between tracks when listening to an
MD on the MD changer. Instead, the reverse play function is can-
celled when it reaches the beginning of a track, at which point
normal play automatically resumes.
NOTE
Track Search
Search forwards or backwards through the tracks on the disc
until you reach the one that you want to listen to.
Making a Reverse Track Search:
Press the 4 button to display the desired track number.
Press once to search back to the beginning of the current
track, twice to search back to the beginning of the previous
track, and so forth.
Play starts at the beginning of the displayed track number.
Pressing the 4 button whilst listening to track 1 only searches
back to the beginning of that track. The reverse search is not
"recycled" to the last track on the disc.
Making a Forward Track Search:
Press the ¢ button to display the desired track number.
Press once to fast forward to the next track, twice to fast for-
ward to the track after that, and so forth.
Play starts at the beginning of the displayed track number.
You cannot make a forward track search when listening to the
last track on a disc.
NOTE
NOTE
When the disc changer with the O-N selection switch is con-
nected, set the switch to "O " position to operate the disc
changer mode.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood krc-259 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood krc-259 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info