Restoring Original Unit Source During Phone Call:
Press the SRC button.
"CALL" disappears from the display, and the volume of the
original source is restored gradually.
Turning TEL Mute Function Off After Phone Call:
Hang the phone up.
"CALL" disappears from the display.
The original source (i.e., the one used before the phone call) is
returned to automatically, and the volume restored gradually.
Shut down the audio system temporarily whenever an
incoming call is received.
The function will not work if a cable is not connected to the car
phone.
When the telephone rings:
When a call is received, "CALL" is displayed and all the unit
functions are temporarily interrupted.
NOTE
TEL Mute
Function of the KDC-4590R/KDC-4590RV
This function allows you to adjust the setting that is recalled
with the System Q, according to types of speakers.
Press the SRC button repeatedly to select the standby mode.
"ALL OFF" is displayed when the standby mode is selected.
Press the Q button to enter the mobile preset plan mode.
Press either the 4 or ¢ button to select the type of
speaker. The setting switches as follows.
Off ("SP OFF") / For the OEM speaker ("SP OEM") / For 6/6x9
in. speaker ("SP 6/6x9") / For 5/4 in. speaker ("SP 5/4")
Press the Q button to end the mobile preset plan mode.
When you change the type of speaker setting, the bass, middle
and treble tone settings are returned to original levels.
NOTE
4
3
2
1
Mobile Preset
factor, treble centre frequency, and treble level.
Note that some of these parameters cannot be controlled by the
audio control setting feature.
Their setting values are different depending on the setting of the
mobile preset plan mode. (KDC-4590R/4590RV only)
— 9 —
