683161
163
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
PC Control
The ARCP-890 radio control program, ARHP-890 radio host
program, ARUA-10 USB audio control program and PC
commands are used to control this transceiver or to enable the use
of a PC speaker or microphone.
This manual describes only the procedures for configuring the
baud rate of the COM/USB port used for PC control. For more
details on the necessary preparations and method of operation,
please refer to the descriptions of the respective program
software (Help text) and PC command list.
To control this transceiver via USB cable connection, download
the virtual COM port driver.
To output the RX audio from the PC speaker using the USB
audio function or transmit the audio input to the PC microphone,
download the ARUA-10 audio controller. (In principle, delay
occurs when USB audio is used. Make use of it for
communication where time lag does not constitute an issue.)
The abovementioned program, virtual COM port driver and PC
command list can be downloaded from the website below.
http://www.kenwood.com/i/products/info/amateur/
software_download.html
Make sure not to connect this transceiver and the PC
with the USB cable until the installation of the virtual COM
port driver downloaded from the above URL is
completed.
If this transceiver is connected to the PC without
installing the virtual COM port driver, a wrong driver that
is not compatible with this transceiver may be installed
and communication with the PC may not be established
properly. To prevent a wrong driver from being installed,
the virtual COM port driver must be installed before
connecting to the PC.
Before connecting this transceiver with a PC, make sure
to turn off the power of this transceiver.
The USB function of this transceiver complies with the
USB 2.0 standard. (USB audio complies with USB Audio
Class 1.0.)
Configuring the COM/USB (Rear Panel) Baud Rate
This is used to configure the baud rate of the COM/USB port used
for PC control.
Configure in Menu [7-00]
Baud Rate (COM Port)
(COM) or Menu [7-01] Baud Rate (Virtual Standard
COM) (USB)
COM
Setting Value
4800/ 9600 (default)/ 19200/ 38400/ 57600/
115200 [bps]
USB
Setting Value
9600/ 19200/ 38400/ 57600/ 115200 (default)
[bps]
To use the baud rate of 38400, 57600 or 115200 bps,
configure the baud rate of the RS-232C port of the PC
you are using to a high speed.
When using the ARCP-890, use a transfer rate that is as
fast as possible.
To display the bandscope at the normal speed during
remote control of this transceiver using the ARCP-890
and ARHP-890, it is necessary to use an even higher
baud rate. Connect a home LAN to the LAN connector
on the rear panel.
Configuring the USB Keyboard
A USB keyboard can be used by connecting it to the (USB-A) port
on the front or rear panel. It can be used to transmit or play back
the voice or message assigned to a function key or to enter and
transmit a text in the RTTY (FSK) or PSK mode.
When connected to this transceiver, the USB keyboard can be
used for text input. The behavior (key repeat) when a key on the
USB keyboard is pressed and held can also be configured.
Sending Message from the USB Keyboard
When this transceiver is configured as follows, a voice or message
can be sent out by pressing the corresponding function key on the
USB keyboard.
When message sending from the USB keyboard is ON
A voice or message has been assigned to a function key on the
USB keyboard
Configure in Menu [9-00] Send Message by
Function Keys
Setting Value Off/ On (default)
When 2 USB keyboards are connected, only the one that
is first connected to this transceiver is recognized.
Channels not registered with a message cannot be
selected.
Message in the CW, FSK or PSK mode is sent out
according to the settings of the channel in which the
message is registered.
While in the CW, FSK or PSK mode, a message can be
sent out when the RTTY communication screen is
displayed.
Selecting a USB Keyboard Language
Configure the type of USB keyboard (language or region) that is
connected to this transceiver.
Configure in Menu [9-01]
Keyboard Language
Setting Value
Japanese/ English(US) (default)/ English(UK)/
French/ French(Canadian)/ German/
Portuguese/ Portuguese(Brazilian)/ Spanish/
Spanish(Latin American)/ Italian
Configuring the Time for Activating Key Repeat
Configure the time interval before activating the key repeat
operation of the USB keyboard.
Configure in Menu [9-02]
Repeat Delay Time
Setting Value 1 to 2 (default) to 4 (1 step)
Configuring the Key Repeat Speed
Configure the key repeat speed of the USB keyboard.
Configure in Menu [9-03]
Repeat Speed
Setting Value 1 (default) to 32 (1 step)
OTHER FUNCTIONS 16
16-5
163

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info