683161
151
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Setting
Item
Configuration Method
Day of the
Week
Press F4 [ ] to program the timer operation on
a specific day of the week.
Timer operation is enabled only on the days for
which the corresponding checkbox is selected.
Power-on
Time/
Power-off
Time
Press F4 [–]/ F5 [+] or the numeric keypad, or turn the
[MULTI/CH] control to configure the time for turning on
and off this transceiver using the timer.
Configure the time to a value between “00:00” and
“23:59”.
When “Power-on” is selected, the power-on time
can be configured.
When “Power-off” is selected, the power-off time
can be configured.
Frequency/
Mode
Press F5 [COPY] to configure the frequency and mode
to start up in by the timer.
Turn the Tuning or [MULTI/CH] control or use the
Band or Mode key to change the current receiving
VFO or memory channel and align it with the
frequency/mode for performing reception when the
program timer is activated.
Press F5 [COPY] every time when changing the
frequency or mode to start up by the timer.
6 Press F6 [OK].
The “configuration complete” screen appears.
The programmed timer operation is now enabled. (<<
>>
lights up.)
7 Press F6 [OK].
Returns to the Timer menu screen.
8 Press [ESC] to end the process.
9 If the timer (excluding Power-off timer) is set to ON,
press [ ] to power off this transceiver.
If a timer mode other than “Off” is configured, the [POWER]
LED lights up in orange.
Before pressing F5 [COPY] to copy the operating data
that is registered in the memory channel, press and hold
[M>V] to shift the operating data of the memory channel
to VFO.
Configure settings other than frequency and mode
before pressing F5 [COPY] in step 4.
When programming the timer recording function, there
must be an interval of at least 1 minute from the time
recording starts (Power-on time) to the time recording
ends (Power-off time). Otherwise, programmed
recording cannot be performed.
Timer recording up to a duration of 4 hours can be
configured.
Program timer can be configured even when F6 [OK] in
step 4 is pressed after the preconfigured interval has
elapsed.
To record audio to a USB flash drive, insert the USB flash
drive into the (USB-A) connector on the front panel after
configuring the timer recording settings and before
recording starts. Use a USB flash drive that is formatted
by this transceiver and one with sufficient remaining
space.
Timer recording does not starts unless this transceiver
is powered off.
When the power of this transceiver is OFF, the [POWER]
LED starts blinking 1 minute before timer recording
starts, and pressing [
] in this state does not power on
this transceiver.
If the power of this transceiver is not in the OFF state
when timer recording is ON, a message will be displayed
3 minutes and 1 minute before timer recording starts.
Press [
] to turn off the power of this transceiver.
The [POWER] LED light remains orange during timer
recording, while the [REC] LED lights up in red.
To cancel timer recording after the [POWER] LED starts
blinking and before timer recording starts, press and
hold [
] for 4 seconds.
While timer recording is in progress, all other operations
are disabled until timer recording stops. To cancel timer
recording, press [
] and follow the displayed message
to press and hold down F4 [(BREAK)] .
If the sleep timer is configured, the operation of the
program timer function will be temporarily disabled.
If the power-off time configured in APO is earlier, the
power of the transceiver is turned off by the APO
function.
CLOCK DISPLAY/TIMER 14
14-5
151

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info