683161
128
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
3
Press F2 [ ]/ F3 [ ] to select Copy Files to
USB Flash Drive.
4 Press F4 [SELECT].
A screen for selecting the files to copy is displayed.
.
5
Press F2[ ] or F3[ ], or turn the [MULTI/CH]
control to select the items to copy.
6
Press F5 [ ] to select the checkbox to the left
of the settings data name.
Pressing F5 [ ] again deselects the checkbox. (Files
are not copied.)
Pressing F6 [CLR.ALL] deselects all the checkboxes.
The items that can be copied are the same as those in the
table in “Copying Files to a PC”. Select at least 1 item.
7 Press F4 [OK].
Copy starts and a copy in progress screen is displayed.
After file copying is complete, a confirmation screen on the
batch deletion of files is displayed.
Items for which the checkboxes are selected on the screen for
selecting the files to copy can be deleted from the built-in memory.
Pressing and holding F4 [(DELETE)] executes the file
deletion operation.
Pressing F7 [KEEP] leaves the files intact and returns the
display to the USB/File Management menu screen.
8 Press [ESC] to end the process.
If the number of files exceeds 255 while copy is in
progress, the copy operation stops.
When removing the USB flash drive, make sure to execute
Safely Removing the USB Flash Drive” (11-6).
If the same file on the source location is also found in the
destination USB flash drive, the latter file will be overwritten.
If there is insufficient memory in the USB flash drive for
all the files to be copied, pressing F4 [OK] will result in
an error and “Insufficient Memory Size” will be displayed
on the screen.
Pressing F7 [CANCEL] while copying is in progress
starts the cancel copy operation. When the cancel copy
operation is complete, the display returns to the USB/File
Management menu screen.
While manual recording or CW/RTTY/PSK
communication log recording is in progress, selecting a
file to copy followed by pressing F4 [OK] will result in an
error and an “unable to copy” message will be displayed.
When a remote user is logged in via the KNS function
and the communication log is set to ON, selecting “KNS
Log Files” and pressing F4 [OK] will result in an error and
an “unable to copy” message will be displayed.
Safely Removing the USB Flash Drive
When removing a USB flash drive from this transceiver, make sure
to follow the steps below to remove the device safely. Failure to do
so may result in the damage of the USB flash drive, settings data
files and audio data files or malfunction of this transceiver.
1 Press [MENU].
2 Press F [USB/FILE] to display the USB/File
Management menu screen.
If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
3
Press F2 [ ]/ F3 [ ] to select Safe Removal of
USB Flash Drive.
4 Press F4 [SELECT].
A message on the safe removal of the USB flash drive is displayed.
.
Pressing F7 [CANCEL] ends the operation without
performing the safe removal of the USB flash drive.
5 Press F4 [OK].
Safe removal starts.
.
.
6 Press F4[OK].
The USB flash drive can now be removed.
7 Press [ESC] to end the process.
11 USB/FILE MANAGEMENT
11-6
128

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info