683161
74
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
FFT Scope
The audio FFT scope is used for viewing the tuning status.
The two vertical lines on the left and right represent the mark and
space frequencies respectively. Adjust the tuning frequency while
receiving a signal such that the two peaks overlap evenly with the
two lines.
Waterfall
The waterfall is a time-series display of the RX signal spectrum
which functions in tandem with the FFT scope. The entire waterfall
display can also be shifted in tandem with changes in the RX
frequency.
X-Y Scope
The X-Y scope displays the tuning status in the RTTY (FSK) mode
as a cross pattern. The cross patterns bisect at right angles (90
degrees) when this transceiver is correctly tuned to the signal.
Threshold Level
Displays the threshold value of the RX signal level for decoding.
Operating the RTTY Encode/Decode Screen
The following operations are enabled when the RTTY
communication screen opens.
Pressing the [Page Up] or [Page Down] key scrolls the display
of the TX or RX details.
Key Behavior
F1 [MORE] Switches the key guide.
F3 [PAUSE]
Pauses update (drawing) of the TX/RX details
display area. Pressing the key again resumes the
update (drawing).
F4 [LOG]
Turns ON/OFF the communication log function.
Pressing and holding this key displays the screen
for selecting a log file that is saved.
F4 [(CLEAR)]
Pressing and holding the key clears the text
displayed on the TX/RX details screen.
F5 [THLD]
Switches to the threshold level configuration
mode.
F5 [MEMORY] Switches to the RTTY Message screen.
F6 [X-Y LEV]
Switches between the speed and density of the X-
Y scope.
F7 [EXTEND]
Enlarges the size of the RTTY communication
screen.
Pressing it again restores the screen to the
standard size.
Indicator Displays
Display
Behavior
.
Appears when the communication log function is
ON.
.
Appears when the communication log function is
ON and in the standby mode.
.
Appears when signal decoding is in progress.
.
Appears when encoding the characters in the TX
buffer.
.
Appears when the decode function is stopped or
disabled.
.
Appears when transmitting the message memory.
.
Appears when in the insert mode.
.
Appears when in the overwrite mode.
Saving RTTY Communication Logs
The CW, RTTY and PSK communication screens can be saved
using the communication log function. Please refer to
“Communication Log” on page 5-27.
Adjusting the RTTY Decode Threshold Level
Noise that occurs when there is no signal may sometimes be
erroneously detected as text, which results in the display of
unwanted text. To reduce the occurrence of such issues, adjust
the threshold level.
Raise the threshold level when there is frequent erroneous
detection due to noise.
1 Press F5 [THLD].
The threshold level setting can now be adjusted.
.
2 Press F4 [–]/ F5 [+] or turn the [MULTI/CH] control
to adjust the level.
Setting Value 1 to 10 (default) to 30 (1 step)
Adjust the threshold value in the ascending order according
to the receiving status of noise, for example. Start from a
small value between the range of 1 to 30 and configure the
threshold value to a point where reception is good.
To restore the default setting, press and hold F2 [(RESET)].
3
Press F1 [ ] to end the process.
FFT Scope/X-Y Scope Display Setting
The tuning scope displayed on the RTTY communication screen
can be switched to an “FFT scope” or “X-Y scope” display.
Configure in Menu [2-09]
RTTY Tuning Scope
Setting Value FFT Scope (default)/ X-Y Scope
The display toggles between the “FFT Scope” and “X-Y Scope”
each time the scope display on the screen is touched.
FFT Scope Waveform Averaging
The waveform displayed on the FFT scope can be averaged.
Averaging of the waveform reduces random noise and makes
observation of the target signal easier.
Configure in Menu [2-00]
FFT Scope Averaging
(RTTY Decode)
Setting Value
0 (default) to 9 (1 step) (minimum to maximum
averaging)
5 COMMUNICATING AIDS
5-18
74

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info