606707
53
Verklein
Vergroot
Pagina terug
1/77
Pagina verder
APRS-8
[CLR]: Cancels further transmissions of the current
message.
The table below shows the meanings of the symbols to be
shown in step 2.
aMeaning
Message addressed to you
B Bulletin message
! Report by the National Weather Service
bRX or TX?
Received message (or bulletin)
A message (or bulletin) for transmitting
c
Status
n
1
“n” indicates the remaining number of times
for transmitting the message (or bulletin).
1
A message for which a reception
acknowledgment was returned
.
1
A message (or bulletin) transmitted
5 times (For a message, a reception
acknowledgment was not returned.)
1
These indicators appear for outgoing messages (or bulletins).
TRANSMITTING A MESSAGE
When you press [SEND] on the “MESSAGE LIST” display, the
remaining messages on the Message List will be transmitted.
After entering a message on the message display, pressing the
Tuning Control will cause it to transmit every minute.
BASIC SETTINGS
Enter Menu mode and access Menu 600.
My Callsign <MY CALLSIGN>
Program your callsign using a maximum of 9 alphanumeric
characters. You may include SSID characters in the string.
Unless you program a callsign, you cannot transmit APRS
packets.
1 Select MY CALLSIGN.
The display for entering a callsign appears; the fi rst digit
blinks. The default is “NOCALL”.
2 Rotate the Tuning control to select the fi rst digit.
You can enter 0 to 9, A to Z, and –.
3 Press the Tuning control.
The cursor moves to the next digit.
4 Repeat steps 2 and 3 to enter up to 9 digits.
Note: When all settings are blank, “NOCALL” is automatically set. In this
case, the Position packet or Message packet cannot be transmitted.
Beacon Type <BEACON TYPE>
[APRS]: Beacons are transmitted in APRS format when
the “APRS” icon appears on the upper left of the display.
Additionally, in Menu mode, only those menus which can be
set with APRS are displayed.
[NAVITRA]: Beacons are transmitted in NAVITRA format
when the “NAVITRA” icon appears on the upper left of the
display. Additionally, in Menu mode, only those menus which
can be set with NAVITRA are displayed.
APRS Lock <APRS LOCK>
This function prevents accidentally changing the built-in data
band frequency or accidentally transmitting on the data band
by pressing [PTT].
The “APRSLOCK” appears when APRS lock is activated.
[FREQUENCY]: The frequency of the built-in data band
cannot be changed.
(You also cannot perform Scan with [CALL], [VFO], [MR],
[MHz], or the Tuning control.)
[FREQUENCY & PTT]: The frequency of the built-in data
band cannot be changed. You cannot transmit on the data
band by pressing [PTT].
[FREQUENCY & TNC]: The frequency of the built-in data
band cannot be changed. While in APRS mode, pressing
[TNC] will not exit APRS mode.
[FREQUENCY & PTT & TNC]:
The frequency of the built-in
data band cannot be changed. You cannot transmit on the
data band by pressing [PTT]. While in APRS mode, pressing
[TNC] will not exit APRS mode.
When the data band is set as the cross band, both band
frequencies cannot be changed and you cannot transmit using
[PTT].
During APRS lock, you cannot change the CTCSS/DCS setting
of the data band.
During APRS lock, you cannot change the DUAL setting of the
non-data band.
[OFF]: Changes the internal Data Band frequency so that
you can transmit on the internal Data Band by pressing
[PTT].
Not-yet-read
indicator
Time/ Date < before today >
(message received)
Sequence
53

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TM-D710GA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TM-D710GA in de taal/talen: Engels als bijlage per email.

De handleiding is 7,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TM-D710GA

Kenwood TM-D710GA Gebruiksaanwijzing - Nederlands - 75 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - Nederlands - 55 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - Deutsch - 74 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - English - 55 pagina's

Kenwood TM-D710GA Gebruiksaanwijzing - Français - 77 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info