606703
75
Verklein
Vergroot
Pagina terug
1/75
Pagina verder
WIRELESS OPERATION (TH-D72A ONLY)
If you also have a Kenwood multi-band mobile transceiver, you can control one of its bands by sending DTMF tones from
this handy transceiver. You will find this function useful when you want to control your mobile transceiver from a location
outside your vehicle.
Note:
You can remotely control only mobile transceivers that have both the secret number and Remote Control functions.
FCC rules permit you to send control codes only on the 440 MHz band.
PREPARATION
Let us assume the VHF band of the mobile transceiver will
be controlled.
On the handy transceiver:
1 Press [PTT] + [VFO] + Power ON.
The current secret access code number appears. The
default is 000.
2 To change the secret number, press the numeric keys
(0 to 9) to enter a 3-digit number.
You can also press [ ]/[ ] to select each digit. Press
[
OK] (or [ESC ]) to move the cursor to the next (or
previous) digit.
3 Press [ OK] to complete the setting.
4 Select the UHF band.
5 Select the transmit frequency.
6 Turn the transceiver power OFF.
7 Press [PTT] + [MR] + Power ON.
The transceiver enters Remote Control mode. “Mobile
Ctrl” appears.
To exit Remote Control mode, repeat steps 6 and 7.
On the mobile transceiver:
8 Set the ID code to the same secret number you set on
the handy transceiver.
For the method, refer to the instruction manual for the
mobile transceiver.
9 Select the receive frequency on the UHF band.
Match this frequency with the transmit frequency of the
handy transceiver.
10 Enter the transceiver’s Remote Control mode.
For the method, refer to the instruction manual for the
mobile transceiver. If it is not described, consult your
authorized Kenwood dealer, customer service, or service
center.
CONTROL OPERATION
When in Remote Control mode, the keys of the handy
transceiver will function as described below. Each time
you press a key, the handy transceiver will automatically
transmit the corresponding command to the mobile
transceiver.
ON
1
TONE ON CTCSS ON ENT
OFF
1
TONE OFF CTCSS OFF TONE SEL
CALL VFO MR REP ON
2
DOWN LOW UP REP OFF
2
1
TM-V7/ TM-D700: Revers ON/ OFF
TM-D710/ TS-2000: DCS ON/ OFF
Other than TM-V7/ TM-D700/ TM-D710/ TS-2000:
Tone Alert ON/ OFF.
2
Switches Cross-band Repeater ON/ OFF if the mobile
transceiver has this function.
To change the transmit/ receive frequency:
([VFO] [ENT] [0] ~ [9] (enter the necessary digits)
[ENT]) or ([VFO] [ ]/[ ])
To recall a memory channel:
([MR] [ENT] [0] ~ [9] (enter the necessary digits)
[ENT]) or ([MR]
[ ]/[ ])
To change the tone (or CTCSS) frequency:
([TONE SEL] [0] ~ [9] (enter 2 digits; ex. [0], [5])
[TONE SEL])
Use Nos. 01 to 42, as shown in the CTCSS table.
Your mobile transceiver may require you to first activate the
Tone or CTCSS function. It may also allow you to program a
separate tone and CTCSS frequency. Check the instruction
manual for the mobile transceiver.
WIRELESS OP – 1
75

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TH-D72A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TH-D72A in de taal/talen: Engels als bijlage per email.

De handleiding is 7,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Kenwood TH-D72A

Kenwood TH-D72A Gebruiksaanwijzing - Nederlands - 156 pagina's

Kenwood TH-D72A Gebruiksaanwijzing - Nederlands - 73 pagina's

Kenwood TH-D72A Gebruiksaanwijzing - Deutsch - 156 pagina's

Kenwood TH-D72A Gebruiksaanwijzing - Deutsch - 75 pagina's

Kenwood TH-D72A Gebruiksaanwijzing - English, Français - 156 pagina's

Kenwood TH-D72A Gebruiksaanwijzing - Français - 76 pagina's

Kenwood TH-D72A Gebruiksaanwijzing - Italiano - 156 pagina's

Kenwood TH-D72A Gebruiksaanwijzing - Espanõl - 156 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info