796137

Kenwood NX-5800E Handleiding

1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Model Frequency range Max. output power
NX-5700-E
TX/RX 136.000 - 174.000 MHz 25 W
GPS 1575.42 ± 1 MHz –
Bluetooth 2402 - 2480 MHz Class2 / 2.5 mW
NX-5800-E
TX/RX 400.000 - 470.000 MHz 25 W
GPS 1575.42 ± 1 MHz –
Bluetooth 2402 - 2480 MHz Class2 / 2.5 mW
NX-3720-E TX/RX 136.000 - 174.000 MHz 25 W
NX-3720G-E
TX/RX 136.000 - 174.000 MHz 25 W
GPS 1575.42 ± 1 MHz –
Bluetooth 2402 - 2480 MHz Class2 / 2.5 mW
NX-3820-E TX/RX 400.000 - 470.000 MHz 25 W
NX-3820G-E
TX/RX 400.000 - 470.000 MHz 25 W
GPS 1575.42 ± 1 MHz –
Bluetooth 2402 - 2480 MHz Class2 / 2.5 mW
NX-1700-E TX/RX 136.000 - 174.000 MHz 25 W
NX-1800-E TX/RX 400.000 - 470.000 MHz 25 W
TRANSCEIVER
USER GUIDE
This User guide covers only the basic operations of your radio.
For using details instruction manual, refer to the following URL
or QR code.
https://manual.kenwood.com/files/B5K-1000-00.pdf
SUPPLIED ACCESSORIES
Carefully unpack the transceiver. We recommend that you identify the items listed
in the following list before discarding the packing material. If any items are missing
or have been damaged during shipment, le a claim with the carrier immediately.
Item NX-5000
series NX-3000
series NX-1000
series
DC power cable with fuses (15 A) 1 1 –
DC power cable with fuses (10 A) – – 1
Mounting bracket 1 1 1
Microphone 1 – –
Microphone hanger 1 – –
4 x 16 mm self-tapping screw 3 – –
Screw set
5 x 16 mm self-tapping screw 4 4 4
M4 x 6 mm hex-headed screw with washer 4 4 4
Spring washer 4 4 4
Flat washer 4 4 4
User guide 1 1 1
BASIC OPERATION
Display
Illumination sensor
Status indicator Speaker
Speaker
Status indicator
NX-3000 series
NX-5000 series
Display
NX-1000 series Display
Status indicator Operation buttons
Operation buttons
Operation buttons
Microphone
PTT switch
Speaker
SWITCHING POWER ON/OFF
Press [ ] to switch the transceiver ON.
Press [] again to switch the transceiver OFF.
ADJUSTING THE VOLUME
Press the button programmed as [Volume Up] to increase the volume.
Press the button programmed as [Volume Down] to decrease the volume.
SELECTING A ZONE AND CHANNEL
Select the desired zone and channel using the buttons programmed as [Zone Up]/
[Zone Down] and [Channel Up]/ [Channel Down].
TRANSMITTING
1 Select the desired zone and channel.
2 Press the PTT switch and speak into the microphone. Release the PTT switch
to receive.
• For best sound quality, hold the microphone approximately 3 ~ 4 cm (1.5
inches) from your mouth.
RECEIVING
Select the desired zone and channel. If signaling has been programmed on the
selected channel, you will hear a call only if the received signal matches your
transceiver settings.
ÉMETTEUR-RÉCEPTEUR
GUIDE DE L’UTILISATEUR
Cette Guide de l’utilisateur couvre uniquement les opérations
de base de votre radio. Pour utiliser ce manuel d’instruction
(User Manual) en détail, reportez-vous à l’URL suivante ou
code QR.
https://manual.kenwood.com/files/B5K-1000-00.pdf
ACCESSOIRES FOURNIS
Déballez soigneusement l’émetteur-récepteur. Prenez soin de vérier la présence
des articles ci-dessous avant de vous débarrasser du matériel d’emballage.
S’il manque un des éléments ou si un élément est endommagé, remplissez
immédiatement un formulaire de plainte avec le livreur.
Article Série
NX-5000 Série
NX-3000 Série
NX-1000
Câble d’alimentation CC avec fusibles (15 A) 1 1 –
Câble d’alimentation CC avec fusibles (10 A) – – 1
Support de montage 1 1 1
Microphone 1 – –
Crochet à microphone 1 – –
Vis taraudeuse 4 x 16 mm 3 – –
Ensemble de vis
Vis taraudeuse 5 x 16 mm 4 4 4
Vis à tête hexagonale et rondelle M4 x 6 mm 4 4 4
Rondelle à ressort. 4 4 4
Rondelle ordinaire 4 4 4
Guide de l’utilisateur 1 1 1
FONCTIONNEMENT DE BASE
Affichage
Capteur d’éclairage
Indicateur d’état Haut-parleur
Haut-parleurIndicateur d’état
Série NX-3000
Série NX-5000
Affichage
Série NX-1000 Affichage
Indicateur d’état Boutons de fonctionnement
Boutons de fonctionnement
Boutons de fonctionnement
Microphone
Commutateur PTT
Haut-parleur
MISE SOUS/ HORS TENSION
Appuyez [ ] pour mettre l’émetteur-récepteur sous tension.
Appuyez à nouveau sur [] pour mettre l’émetteur-récepteur hors tension.
RÉGLAGE DU VOLUME
Appuyez sur la touche programmée en tant que [Volume haut] pour augmenter le
volume.
Appuyez sur la touche programmée en tant que [Volume bas] pour diminuer le
volume.
SÉLECTION D’UNE ZONE ET D’UN CANAL
Sélectionnez la zone et le canal souhaités à l’aide des boutons programmés en
tant que [Zone haut]/ [Zone bas] et [Canal haut]/ [Canal bas].
TRANSMISSION
1 Sélectionnez la zone et le canal voulus.
2 Appuyez sur le commutateur PTT et parlez dans le microphone. Relâchez le
commutateur PTT pour recevoir
• Pour une meilleure qualité du son, tenez le microphone à environ 3 ~ 4 cm
de votre bouche.
RÉCEPTION
Sélectionnez la zone et le canal voulus. Si la signalisation a été programmé
sur le canal sélectionné, vous entendrez un appel uniquement si le signal reçu
correspond aux réglages de votre émetteur-récepteur.
B5A-4029-10 (E)
USER GUIDE
GUIDE DE L'UTILISATEUR
GUÍA DEL USUARIO
GUIDA PER L'UTENTE
BENUTZERHANDBUCH
GEBRUIKERSHANDLEIDING
KULLANICI REHBERI
ΟΔΗΓΟΣ ΧΡΗΣΤΗ
GUIA DO UTILIZADOR
NX-5000 series
NX-3000 series
NX-1000 series
TRANSCEPTOR
GUÍA DEL USUARIO
Este Guía del Usuario sólo cubre las operaciones básicas de
su radio. Para ver el manual de instrucciones de detalles de
uso , consulte el siguiente URL código QR.
https://manual.kenwood.com/files/B5K-1000-00.pdf
ACCESORIOS SUMINISTRADOS
Desembale el transceptor con cuidado. Le recomendamos que logre identicar
los elementos que se indican a continuación antes de deshacerse del material de
embalaje. Si falta o ha resultado dañado algún artículo durante el envío, presente
inmediatamente una reclamación a la empresa de transporte.
Artículo Serie
NX-5000 Serie
NX-3000 Serie
NX-1000
Cable de alimentación CC con fusibles (15 A) 1 1 –
Cable de alimentación CC con fusibles (10 A) – – 1
Soporte de montaje 1 1 1
Micrófono 1 – –
Horquilla del micrófono 1 – –
Tornillo autorroscante de 4 x 16 mm 3 – –
Juego de tornillos
Tornillo autorroscante de 5 x 16 mm 4 4 4
Tornillos de cabeza hexagonal con arandela
de M4 x 6 mm 444
Arandela de resorte 4 4 4
Arandela plana 4 4 4
Guía del usuario 1 1 1
OPERACIONES BÁSICAS
Pantalla
Sensor de iluminación
Indicador de estado Altavoz
Altavoz
Indicador de estado
Serie NX-3000
Serie NX-5000
Pantalla
Serie NX-1000 Pantalla
Indicador de estado Botones de operación
Botones de operación
Botones de operación
Micrófono
Conmutador de PTT
Altavoz
ENCENDIDO Y APAGADO
Pulse [ ] para activar el transceptor.
Vuelva a pulsar [] para apagar el transceptor.
AJUSTE DEL VOLUMEN
Pulse el botón programado como [Subir volumen] para aumentar el volumen.
Pulse el botón programado como [Bajar volumen] para reducir el volumen.
SELECCIÓN DE UNA ZONA Y CANAL
Seleccione la zona y el canal deseados utilizando los botones programados como
[Zona arriba]/ [Zona abajo] y [Subir canal]/ [Bajar canal].
TRANSMISIÓN
1 Seleccione la zona deseada mediante.
2 Presione el conmutador PTT y hable al micrófono. Suelte el conmutador PTT
para recibir.
• Para obtener una calidad de sonido optima, sujete el micrófono a 3 ó 4 cm
de la boca.
RECEPCIÓN
Seleccione la zona y el canal deseados. Si se ha programado la función de
señalización en el canal seleccionado, sólo oirá las llamadas en las que la señal
recibida coincida con la conguración del transceptor.
RICETRASMETTITORE
GUIDA PER L’UTENTE
Questa guida per l’utente spiega soltanto i fondamenti d’uso
del ricetrasmettitore. Il manuale d’istruzioni dettagliato è
scaricabile dall’indirizzo o codice QR.
https://manual.kenwood.com/files/B5K-1000-00.pdf
ACCESORI FORNITI
Disimballare con cura il ricetrasmettitore. Prima di eliminare il materiale
d’imballaggio, si consiglia di vericare la presenza degli articoli contenuti
nell’elenco seguente. In caso di parti mancanti o danneggiate, inoltrare
immediatamente reclamo al corriere.
Articolo Serie
NX-5000 Serie
NX-3000 Serie
NX-1000
Cavo di alimentazione c.c. con fusibili (15 A) 1 1 –
Cavo di alimentazione c.c. con fusibili (10 A) – – 1
Staa di montaggio 111
Microfono 1 – –
Gancio microfono 1 – –
Vite autolettante 4 x 16 mm 3 – –
Set di viti
Vite autolettante 5 x 16 mm 444
Vite esagonale con rondella M4 x 6 mm 4 4 4
Rondella a molla 4 4 4
Rondella piatta 4 4 4
Guida per l’utente 1 1 1
FUNZIONAMENTO DI BASE
Display
Sensore d’illuminazione
Indicatore di stato Altoparlante
Altoparlante
Indicatore di stato
Serie NX-3000
Serie NX-5000
Display
Serie NX-1000 Display
Indicatore di stato Pulsanti di funzionamento
Pulsanti di funzionamento
Pulsanti di funzionamento
Microfono
Interruttore PTT
Altoparlante
ACCENSIONE E SPEGNIMENTO
Premere [ ] per accendere il ricetrasmettitore.
Premere [] di nuovo per spegnere il ricetrasmettitore.
REGOLAZIONE DEL VOLUME
Premere il pulsante programmato come [Volume su] per aumentare il volume.
Premere il pulsante programmato come [Volume giù] per diminuire il volume.
SELEZIONE DI UNA ZONA E DI UN DI CANALE
Selezionare la zona e il canale desiderati utilizzando i pulsanti programmati come
[Zone su]/ [Zone giù] e [Canale su]/ [Canale giù].
TRASMISSIONE
1 Selezionare la zona e il canale desiderati.
2 Premere l’interruttore PTT e parlare nel microfono. Rilasciare l’interruttore PTT
per la ricezione.
• Per ottenere una migliore qualità del suono, tenere il microfono a circa 3 ~ 4
cm dalla bocca.
RICEZIONE
Selezionare la zona e il canale desiderati. Se sul canale selezionato è stata
programmato uno specico tipo di segnalazione, la ricezione da parte di un altro
corrispondente potrà avvenire solo se le segnalazioni risulteranno compatibili ed
idonee al formato utilizzato in fase di programmazione.
INFORMATION ON SOFTWARE LICENSE
This transceiver uses a software according to the following license agreements.
*zlib LICENSE (NX-5000 series/ NX-3000 series)
Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
This software is provided ‘as-is’, without any express or implied
warranty.
In no event will the authors be held liable for any damages arising from
the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you
must not claim that you wrote the original software. If you use
this software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and
must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source
distribution.
Jean-loup Gailly (jloup@gzip.org)
Mark Adler (madler@alumni.caltech.edu)
*libpng LICENSE (NX-5000 series/ NX-3000 series)
This copy of the libpng notices is provided for your convenience. In
case of any discrepancy between this copy and the notices in the le
png.h that is included in the libpng distribution, the latter shall prevail.
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
If you modify libpng you may insert additional notices immediately
following this sentence.
This code is released under the libpng license. libpng versions 1.2.6,
August 15, 2004, through 1.6.8, December 19, 2013, are Copyright
(c) 2004, 2006-2013 Glenn Randers-Pehrson, and are distributed
according to the same disclaimer and license as libpng-1.2.5 with the
following individual added to the list of Contributing Authors
Cosmin Truta
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are
Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are distributed
according to the same disclaimer and license as libpng-1.0.6 with the
following individuals added to the list of Contributing Authors
Simon-Pierre Cadieux Eric S. Raymond
Gilles Vollant
and with the following additions to the disclaimer:
There is no warranty against interference with your enjoyment of the
library or against infringement. There is no warranty that our eorts
or the library will fulll any of your particular purposes or needs. This
library is provided with all faults, and the entire risk of satisfactory
quality, performance, accuracy, and eort is with the user.
libpng versions 0.97, January 1998, through 1.0.6, March 20,
2000, are Copyright (c) 1998, 1999 Glenn Randers-Pehrson,
and are distributed according to the same disclaimer and license
as libpng-0.96, with the following individuals added to the list of
Contributing Authors:
Tom Lane Glenn Randers-Pehrson
Willem van Schaik
libpng versions 0.89, June 1996, through 0.96, May 1997, are
Copyright (c) 1996, 1997 Andreas Dilger Distributed according to
the same disclaimer and license as libpng-0.88, with the following
individuals added to the list of Contributing Authors:
John Bowler Kevin Bracey
Sam Bushell Magnus Holmgren
Greg Roelofs Tom Tanner
libpng versions 0.5, May 1995, through 0.88, January 1996, are
Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
For the purposes of this copyright and license, “Contributing Authors” is
dened as the following set of individuals:
Andreas Dilger Dave Martindale
Guy Eric Schalnat Paul Schmidt
Tim Wegner
The PNG Reference Library is supplied “AS IS”. The Contributing
Authors and Group 42, Inc. disclaim all warranties, expressed or
implied, including, without limitation, the warranties of merchantability
and of tness for any purpose. The Contributing Authors and Group
42, Inc. assume no liability for direct, indirect, incidental, special,
exemplary, or consequential damages, which may result from the use
of the PNG Reference Library, even if advised of the possibility of such
damage.
Permission is hereby granted to use, copy, modify, and distribute this
source code, or portions hereof, for any purpose, without fee, subject to
the following restrictions:
1. The origin of this source code must not be misrepresented.
2. Altered versions must be plainly marked as such and must not
be misrepresented as being the original source.
3. This Copyright notice may not be removed or altered from any
source or altered source distribution.
The Contributing Authors and Group 42, Inc. specically permit, without
fee, and encourage the use of this source code as a component to
supporting the PNG le format in commercial products. If you use this
source code in a product, acknowledgment is not required but would
be appreciated.
A “png_get_copyright” function is available, for convenient use in
“about” boxes and the like:
printf(“%s”,png_get_copyright(NULL));
Also, the PNG logo (in PNG format, of course) is supplied in the les
“pngbar.png” and “pngbar.jpg” (88x31) and “pngnow.png” (98x31).
Libpng is OSI Certied Open Source Software. OSI Certied Open
Source is a certication mark of the Open Source Initiative.
Glenn Randers-Pehrson
glennrp at users.sourceforge.net
December 19, 2013
*Md5 (NX-5000 series/ NX-3000 series/ NX-1000 series)
Copyright (C) 1999, 2000, 2002 Aladdin Enterprises. All rights
reserved.
This software is provided ‘as-is’, without any express or implied
warranty.
In no event will the authors be held liable for any damages arising
from the use of this software.
Permission is granted to anyone to use this software for any
purpose, including commercial applications, and to alter it and
redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you
must not claim that you wrote the original software. If you use
this software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and
must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source
distribution.
L. Peter Deutsch
ghost@aladdin.com
Access the following URL or QR code for the precautions to use this product and for the simple guide.
Refer to the “SIMPLE GUIDE”. Reportez-vous au «GUIDE SIMPLE». Consulte la ”GUÍA SENCILLA”. Fare
riferimento alla “GUIDA RAPIDA”. Siehe die “EINFACHE ANLEITUNG”. Raadpleeg de “EENVOUDIGE GIDS”.
“KOLAY KILAVUZ” bakın. Ανατρέξτε στον “ΑΠΛΟΣ ΟΔΗΓΟΣ”. Féach an “TREOIR SHIMPLÍ”. Vaadake
“KIIRJUHEND”. Pogledajte “KRATKI VODIČ”. Se “SNABBGUIDE”. Prečítajte si „STRUČNÁ PRÍRUČKA“. Glejte
“KRATKA NAVODILA”. Viz „JEDNODUCHÝ NÁVOD“. Se “ENKEL GUIDE”. Lásd az “EGYSZERŰ KÉZIKÖNYV”.
Katso “YKSINKERTAINEN OPAS”. Обърнете се към “ОСНОВНО РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ”.
Consulte o “GUIA SIMPLES”. Zapoznaj się z „INSTRUKCJA UPROSZCZONA”. Irreferi għall- “GWIDA
SEMPLIĊI”. Skatiet “VIENKĀRŠĀ PAMĀCĪBA”. Žr. „PAPRASTAS VADOVAS“. Consultați „GHID SIMPLU”.
https://manual.kenwood.com/les/B5K-0413-00.pdf
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood NX-5800E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood NX-5800E in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Turks als bijlage per email.

De handleiding is 5.02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info