523461
10
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
CD-RECEIVER
KDC-W7541U
KDC-W7541UY
KDC-W7041U
KDC-W7141UY
INSTRUCTION MANUAL
© B64-4049-00/00 (EW/E2W)
Declaration of Conformity with regard to the EMC Directive
2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
B64-4049-00_00_E_English.indd 1B64-4049-00_00_E_English.indd 1 08.2.5 4:24:57 PM08.2.5 4:24:57 PM
2
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Contents
iPod is a trademark of Apple, Inc., registered in the U.S.
and other countries.
The "AAC" logo is trademark of Dolby Laboratories.
Before use 3
Basic Operation 4
General functions
Tuner functions
Disc & Audio file play functions
Function Control 6
Read through this page first for the setting of each
function.
Display Settings 8
About Display Type
Text Display Selection
Font Color Selection
Disc Naming (DNPS)
Auxiliary Input Display Setting
Music disc/Audio file Operation 12
Music Select
Direct Music Search
Direct Disc Search
Basic Operation of Disc Changer (Optional)
Tuner Operation 14
Station Preset Memory
Preset Tuning
Direct Access Tuning
PTY (Program Type)
Program Type preset
Changing Language for PTY Function
Other Functions 16
Security Code
Manual Clock Adjustment
Date Adjustment
AMP Control
Picture downloading
Demonstration mode setting
Theft Deterrent Faceplate
Audio Adjustments 19
Audio Control
Adjusting the detail of Audio Control
Audio Setup
Speaker Setting
Audio Preset Memory
Audio Preset Recall
Basic Operations of remote control 22
Appendix 23
Accessories/ Installation Procedure 26
Connecting Wires to Terminals 27
Installation/Removing the Unit 29
Troubleshooting Guide 30
Specifications 32
B64-4049-00_00_E_English.indd 2B64-4049-00_00_E_English.indd 2 08.2.5 4:24:58 PM08.2.5 4:24:58 PM
English
|
3
Before use
2WARNING
To prevent injury or fire, take the following
precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
Before using this unit for the first time
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
<Demonstration mode Setting> (page 18).
How to reset your unit
• If this unit or the connected unit (disc auto changer,
etc.) fails to operate properly, press the Reset button.
The unit returns to factory settings when the Reset
button is pressed.
Reset button
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
¤
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth or
using a volatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty, wipe
them with a clean soft dry cloth.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
CD player of the unit. Called lens fogging, this
condensation on the lens may not allow CDs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check with
your Kenwood dealer to make sure that they work
with your model and in your area.
• Characters that conform to ISO 8859-5 or ISO 8859-
1 can be displayed. Refer to “MENU” > “Russian of
<Function Control> (page 6).
• The RDS feature won’t work where the service is not
supported by any broadcasting station.
• In this document, the description indicator will light
means a status is displayed. Refer to <About Display
Type> (page 8) for the details of the status display.
• The illustrations of the display, the function icon and
the panel appearing in this manual are examples
used to explain more clearly how the controls are
used. Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Handling CDs
• Do not touch the recording surface of the CD.
• Do not stick tape etc. on the CD, or use a CD with
tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing CDs from this unit, pull them out
horizontally.
• If the CD center hole or outside rim has burrs,
use the CD only after removing the burrs with a
ballpoint pen etc.
CDs that cannot be used
• CDs that are not round cannot be used.
• CDs with coloring on the recording surface or CDs
that are dirty cannot be used.
• This unit can only play the CDs with
.
This unit may not correctly play discs which do not
have the mark.
• You cannot play a CD-R or CD-RW that has not been
finalized. (For the finalization process refer to your
CD-R/CD-RW writing software, and your CD-R/CD-
RW recorder instruction manual.)
B64-4049-00_00_E_English.indd 3B64-4049-00_00_E_English.indd 3 08.2.5 4:24:58 PM08.2.5 4:24:58 PM
4
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Basic Operation
AUX
[1] [6][5][4][3][2] [FNC] [TI]
[ATT] [SRC]
[AUD]
Auxiliary input
(Rear side)
General functions
Power/Source Select button [SRC]
Turns on the power.
When the power is ON, select a source.
SRC Select mode 1: Press the [SRC] button and then
turn the Control knob or push it toward left or right.
To determine the selected source, press the Control
knob.
SRC Select mode 2: Pressing this button each time
switches between sources.
Tuner (“TUNER) , USB or iPod (“USB” or “iPod”), CD
(“Compact Disc) , Auxiliary input (“AUX”), and Standby
(“STANDBY”)
Press at least 1 second to turn off the power.
When the power is ON, the <Security Code> (page
16) is displayed as “CODE ON” or “CODE OFF”.
The SRC Select mode can be set in “MENU” > “SRC
Select of <Function Control> (page 6).
When an optional accessory is connected, the
source name for each device appears.
This unit automatically turns full power OFF after 20
minutes lapses in Standby mode in order to save the
vehicle's battery. The time until full power OFF can
be set in “Power OFF” of <Function Control> (page
6).
When connection of the iPod is recognized, the
source display changes from “USB” to “iPod”.
USB (iPod) source is recognized as CD source on the
connected unit.
Volume control [AUD]
Turn the knob to adjust the volume.
Attenuator
[ATT]
Turning the volume down quickly.
When the volume is reduced, the “ATT” indicator
flashes.
Muting volume upon reception of phone call
When there is a call, “CALL” is displayed and the
audio system is paused. When the call ends, “CALL
disappears and the audio system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
To use the TEL Mute feature, you need to hook
up the MUTE wire to your telephone using
a commercial telephone accessory. Refer to
<Connecting Wires to Terminals> (page 27).
Auxiliary input Auxiliary input
Connect a portable audio device with mini-plug
cable (3.5 ø).
Use the mini-plug cable which is stereo type and
does not have any resistance.
The auxiliary input requires the setting made in “MENU”
> “Built in AUX” of <Function Control> (page 6).
Subwoofer output Control knob
Switches between ON (“SUB WOOFER ON) and OFF
(“SUB WOOFER OFF”) each time pushing toward down
for at least 2 seconds.
This function requires the setting made in “MENU” >
“SWPRE” of <Function Control> (page 6).
Function Control [FNC]
Pressing this button allows you to set various
functions using the Control knob. Refer to <Function
Control> (Page 6).
Category Function of setup item
MENU Allows you to set up the environment.
DISP Allows you to set up the display.
Text/Title scroll
Control knob
Scrolls the CD, audio file, and Radio text display when
pushing toward up for at least 2 seconds.
Control knob
USB Terminal
Release
B64-4049-00_00_E_English.indd 4B64-4049-00_00_E_English.indd 4 08.2.5 4:24:59 PM08.2.5 4:24:59 PM
English
|
5
, : Indicates the button etc. to operate.
Tuner functions
Band select Control knob
Switches between FM1, FM2, and FM3 each time
pushing toward up.
Switches to AM when pushing toward down.
Tuning
Control knob
Changes the frequency when pushing toward left or
right.
During reception of stereo stations the “ST” indicator
is ON.
Auto memory entry [TI]
Memorizes six stations with good reception
automatically when pressed for at least 2 seconds.
Preset memory
[1] - [6]
Memorize the station selected when pressing for at
least 2 seconds.
Preset tuning
[1] - [6]
Recalls the memorized station.
Traffic Information
[TI]
Turns ON or OFF the Traffic Information function. If
traffic bulletin starts when the function is ON, “Traffic
INFO” is displayed and traffic information is received.
If the volume is adjusted during reception of traffic
information, the adjusted volume is memorized
automatically. The memorized volume will be
applied next time the Traffic Information function is
turned ON.
Disc & Audio file play functions
Drop open the faceplate Release
Push the faceplate on the left side, and return it to its
former position.
Disc play Disc slot
Starts playing when a disc is inserted.
When a CD is inserted, the “IN” indicator is ON.
3 inch CD cannot be used. Attempt to insert using
an adapter can cause malfunction.
Disc ejection [0]
You can eject the disc for 10 minutes after switching
off the engine.
USB device/iPod play USB Terminal
Connecting a USB device starts playback.
For the playable audio file, media, and devices, refer
to <About Audio file> (page 23).
USB device removing [0]
Press this button for 2 seconds or longer to select the
remove mode, and the remove the USB device.
During the remove mode, The 0 indicator blinks.
Pause and play
Control knob
Switches between pause and play each time the
center is pressed.
Music search
Control knob
Changes the music when pushing toward left or right.
Fast reverses or forwards the music while keeping
pushing toward left or right. (No sound is output
while playing audio file.)
Folder search
Control knob
Changes the folder containing the audio file when
pushing toward up or down.
Track/ File/ Folder repeat play
[4]
Switches between Track Repeat (“Repeat ON”) and
OFF when pressed while playing a CD.
Switches between File Repeat (“File Repeat ON”),
Folder Repeat (“Folder Repeat ON”), and OFF when
pressed while playing an audio file.
The folder repeat operation cannot be performed
while iPod is playing.
Scan play [2]
Successively plays the intro of the music in the disc
or folder.
Switches between ON (“Scan ON”/ “File Scan ON”) and
OFF each time this button is pressed.
The Scan paly operation cannot be performed while
iPod/ “Media Editer media is playing.
Random play [3]
Randomly plays the music in the disc or folder.
Switches between ON (“Disc Random ON/ “Folder
RDM ON) and OFF each time this button is pressed.
B64-4049-00_00_E_English.indd 5B64-4049-00_00_E_English.indd 5 08.2.5 4:25:00 PM08.2.5 4:25:00 PM
Category Item Setting Entry Setting overview Condition Page
MENU “Security Set”
1 sec.
Sets security code.
16
“SRC Select” “1”*/ “2”
Sets the source selection method.
25
“iPod Mode OFF”/ “ON”*
When set to “ON”, allows you to select music in the manner
similar to that of the iPod.
12
“Beep” “OFF”/ “ON”*
Setting the operation check sound (beep sound) ON/OFF.
“Clock Adjust” 1 sec.
Sets the clock.
16
“Date Adjust” 1 sec.
Sets the date.
17
“Date Mode 7 types 1 sec.
Sets the date display mode.
“SYNC” OFF”/ “ON”*
Synchronizing the RDS station time data and this unit’s clock.
“DSI” “OFF”/ “ON”*
Turns on/off the Disabled System indicator.
“Button
*
3, 4
“Red”*/ “Green
Sets the button illumination color.
“Display” “OFF”/ “ON”*
Turns off the display when no operation is performed.
—25
“Dimmer” “OFF”/ “ON”*
Dims the display part in conjunction with the light switch of
the vehicle.
“ILM Dimmer” “OFF”/ AUTO”*
Dims the key Illumination in conjunction with the light
switch of the vehicle.
25
“ILM Effect” “OFF”/ “ON”*
Sets whether the key illumination brightness is changed in
conjunction with the key operation.
“SWPRE”
*
3, 4
“Rear”*/ “Sub-W”
Sets the preout output.
25
AMP” “OFF”/ “ON”*
Turns on/off the built-in amplifier.
25
“Zone2” “Rear”*/ “Front”
Specifies the destination of AUX input sound when the Dual
Zone function is turned on.
25
“Supreme “OFF”/ “ON”*
Turns ON/OFF the Supreme function.
25
AMP Control”
1 sec.
Controls the connected LX amplifier.
—17
“News” “OFF”*/ “00min
– “90min”
Turns ON/OFF the News Bulletin Automatic Reception
function and sets the news bulletin interrupt disabled time.
25
“Local Seek” OFF”*/ ON”
Only stations whose reception is good are searched in auto
seek tuning.
“Seek Mode” Auto1”*/ Auto2”/
“Manual”
Selects the tuning mode of the radio.
25
AF” “OFF”/ “ON”*
When station reception is poor, automatically switches to the
station that is broadcasting the same program over the same
RDS network.
25
“Regional” “OFF”/ “ON”*
Sets whether to switch to the station only in the specific
region using the AF” control.
Auto TP Seek” OFF”/ “ON”*
When traffic information station reception is poor,
automatically searches for a station that can be received
better.
“MONO” “OFF”*/ “ON”
You can reduce the noise when stereo broadcasts are
received as monaural.
“Name Set” 1 sec.
Sets the disc name (DNPS)/ AUX name.
10, 11
“Russian”
*
2, 4
“OFF”/ “ON”*
Selects Russian as the display language.
25
“Scroll” Auto”/ “Manual”*
When set to “Auto”, scrolls the screen once with the change of
the displayed text.
“Built in AUX” “OFF”*/ “ON”
Sets whether to display AUX during source selection.
“Power OFF” “-----”/ “20min”*/
“40min”/ “60min
Turns off the power when the preset time has lapsed in the
Standby mode.
25
“CD Read” “1”*/ “2”
Sets the CD read mode.
25
“DISP Data
DL
*
1, 2
1 sec.
Downloads the picture data to be shown on the display.
17
6
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Function Control
Functions in the table below can be set up by using Function Control.
B64-4049-00_00_E_English.indd 6B64-4049-00_00_E_English.indd 6 08.2.5 4:25:01 PM08.2.5 4:25:01 PM
Category Item Setting Entry Setting overview Condition Page
Audio Preset”
1 sec.
Presets the setting value of the audio control. The preset
value is retained after resetting.
21
“DEMO Mode” “OFF”/ “ON”*
2 sec.
Specifies whether to enable demonstration.
—18
DISP > TYPE A/ B/ C/ D/ E
Sets the display pattern.
—8
> MODE 1/ 2
Sets the text display pattern.
ıÇ
> GRAPH
Movie 1 – 2/
Downloaded movie*
1, 2
/
Wallpaper 1 – 6/
Downloaded Wallpaper*
1,
2
/ Wallpaper scan
Sets the Type A graphic display.
When Wallpaper scan is selected, displays “SCAN”.
For Download movie and Download Wall Paper, refer to
<Picture downloading> (page 17).
Å
> SIDE Text icon/ Source
icon
Sets the Type C side icon display.
Ç
> TEXT
Sets the text display.
ÅıÇÎ
9
> COLOR
*
1, 2
Sets the text display color.
ÅıÇ
10
> STATUS “ON”/ “OFF”
When set to “ON”, displays the function information for Type
A.
Å
> OUT
*
1, 3
Sets the vehicle-side display.
P.MEM
Presets a station.
14
SCAN “ON”/ —
When set to “ON”, plays the intro of the music in the folder
successively.
RDM “ON”/ —
When set to “ON”, plays the music in the folder randomly.
FiREP “ON”/ —
When set to “ON”, plays the music repeatedly.
FoREP “ON”/ —
When set to “ON”, plays the music in the folder repeatedly.
SCAN “ON”/ —
When set to “ON”, plays the intro of the music on the disc
successively.
RDM “ON”/ —
When set to “ON”, plays the music on the disc randomly.
M.RDM “ON”/ —
When set to “ON”, plays the music in the disc changer
randomly.
T.REP “ON”/ —
When set to “ON”, plays the music repeatedly.
D.REP ON”/ —
When set to “ON”, plays the music on the disc repeatedly.
Next page 3
English
|
7
*Factory setting
* Function of KDC-W7541U.
* Function of KDC-W7541UY.
* Function of KDC-W7041U.
* Function of KDC-W7141UY.
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB/iPod.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set while CD/ Disc changer source.
: Can be set while Disc changer source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set for sources other than the standby
source by setting “2 ZONE” of <Audio Setup> (page
20) to “ON”.
: Refer to the reference page.
Å : Can be set when the specified type is selected for
Display Type.
: Can be set during all sources.
Refer to the respective page for information on how to
set the items with reference page number.
Only the items available to the current source are
displayed.
B64-4049-00_00_E_English.indd 7B64-4049-00_00_E_English.indd 7 08.2.5 4:25:02 PM08.2.5 4:25:02 PM
8
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Function Control
Display Settings
About Display Type
Shown below are examples of display types.
Display Display Type
“TYPE [A]”
4
1
2
“TYPE [B]”
1
1
1
2
“TYPE [C]”
1
1
1
2
3
“TYPE [D]”
6
1
2
“TYPE [E]”
5
1 Text display part
2 Status display
3 Icon display part
4 Graphic display part
5 Clock display
6 Display (varied depending on the source)
1 Enter Function Control mode
Press the [FNC] button.
Function icon is displayed.
2 Select your desired setup item
Operation type Operation
Movement between items Turn the Control knob.
Selection of item Press the Control knob.
Return to previous item Press the [FNC] button or
icon
Repeat selection and determination until your
desired setup item is selected.
Example:
MENU
DISP
DISP
MENU
TEXT
TYPE
3 Make a setting
Turn the Control knob to select a setting value,
and then press the Control knob.
Some items require you to keep pressing the
Control knob for 1 or 2 seconds so that you can
make a setting. For these items, the time during
which you need to keep pressing the Control knob
is displayed in the Entry column in seconds. For
the functions accompanied by the description of
the setting procedure and so forth, the reference
page numbers are displayed.
4 Exit Function Control mode
Press the [FNC] button for at least 1 second.
B64-4049-00_00_E_English.indd 8B64-4049-00_00_E_English.indd 8 08.2.5 4:25:03 PM08.2.5 4:25:03 PM
English
|
9
1 Enter Text Display Selection mode (In Display
Type A/ B/ C/ D)
Select “DISP > “TEXT.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the text display part (Display Type B/ C
only)
Push the Control knob towards up or down.
The cursor () moves to the selected text display
part.
3 Select the text
Turn the Control knob or push it towards left
or right.
4 Exit Text Display Selection mode
Press the Control knob.
If the selected display item does not have any
information, alternative information is displayed.
Some items cannot be selected depending on the
display type and row.
When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed.
When selecting “Folder Name while playing with
iPod, names will be displayed depending on currently
selected browsing items.
Text Display Selection
Changing the text display.
In Tuner source
Information Display
Program Service name (FM) “Frequency/PS”
Title & Artist name* (FM) “Title/Artist”
Station name* (FM) “Station Name
Radio text plus* (FM) “Radio Text Plus”
Radio text (FM) “Radio Text”
Frequency (MW, LW) “Frequency
Clock “Clock”
Date “Date”
Blank “Blank”
* Information of Radio text plus is displayed.
In CD & External disc source
Information Display
Disc title “Disc Title”
Track title “Track Title
Play time & Track number “P-Time”
Disc name “DNPS”
Clock “Clock”
Date “Date”
Blank “Blank”
In Audio file source
Information Display
Music title & Artist name “Title/Artist”
Album name & Artist name Album/Artist”
Folder name “Folder Name
File name “File Name
Play time & Music number “P-Time”
Song time progress bar (iPod) “Time Bar”
Clock “Clock”
Date “Date”
Blank “Blank”
In Standby
Information Display
Standby “Source Name
Clock “Clock”
Date “Date”
Blank “Blank”
In Auxiliary input source
Information Display
Auxiliary input name “Source Name
Clock “Clock”
Date “Date”
Blank “Blank”
B64-4049-00_00_E_English.indd 9B64-4049-00_00_E_English.indd 9 08.2.5 4:25:04 PM08.2.5 4:25:04 PM
10
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Display Settings
Function of KDC-W7541U/W7541UY
Font Color Selection
Selecting the display font color.
1 Enter Font Color Selection mode (In Display
Type A/ B/ C)
Select “DISP > “COLOR”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the text display part (Display Type B/ C
only)
Push the Control knob towards up or down.
The cursor () moves to the selected text display
part.
3 Select the Font Color
Turn the Control knob or push it towards left
or right.
4 Exit Font Color Selection mode
Press the Control knob.
When you selected the Display Type A, select an easy
viewable font color.
Disc Naming (DNPS)
Attaching a title to a CD.
1 Play the disc you want to attach a name to
2 Select Name set mode item during Menu
mode
Select the “Name Set” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
3 Enter Name set mode
Press the Control knob for at least 1 second.
4 Enter the name
Operation type Operation
Move the cursor to the enter
character position
Push the Control knob towards right
or left.
Select the character type* Press the Control knob.
Select the characters Turn the Control knob or push it
towards up or down.
* Each time you press the knob, the character type
alternates between the types shown in the table below.
Character type Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
Enter characters by using a remote control with numbers
buttons.
Example: If you are entering “DANCE”.
Character
“D” A “N” “C” “E”
Button
[3] [
¢
] [2] [
¢
] [6] [
¢
] [2] [
¢
] [3]
Times pressed
11232
5 Exit Menu mode
Press the [FNC] button.
A title cannot be attached to Audio file media.
When operation stops for 10 seconds the name at that
time is registered, and Name Set mode closes.
Media that you can attach a name to
- Internal CD player: 10 discs
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
You can change the name of a CD by the same
operation you used to name it.
B64-4049-00_00_E_English.indd 10B64-4049-00_00_E_English.indd 10 08.2.5 4:25:04 PM08.2.5 4:25:04 PM
English
|
11
Auxiliary Input Display Setting
Selects the display below when changing to
Auxiliary input source.
1 Select Auxiliary input display setting item
during Menu mode (In AUX mode)
Select the “Name Set” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second.
The presently selected Auxiliary input display is
displayed.
3 Select the Auxiliary input display
Turn the Control knob or push it towards up or
down.
AUX”/ “DVD”/ “PORTABLE”/ “GAME”/ “VIDEO”/ “TV
4 Exit Auxiliary input display setting mode
Press the [FNC] button.
When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
The Auxiliary input display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S220A is used. On the KCA-S220A, AUX EXT” is
displayed by default.
B64-4049-00_00_E_English.indd 11B64-4049-00_00_E_English.indd 11 08.2.5 4:25:04 PM08.2.5 4:25:04 PM
12
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Music disc/Audio file Operation
Function of remote control
Direct Music Search
Searchs the music by entering the track number.
1 Enter the music number
Press the number buttons on the remote
control.
2 Search the music
Press the [4] or [¢] button.
Cancelling Direct Music Search
Press the [38] button.
Direct Music Search cannot be performed during playing
of iPod, “Music Editor” media, Random play, or scan play.
Function of disc changers with remote control
Direct Disc Search
Searchs the disc by entering the disc number.
1 Enter the disc number
Press the number buttons on the remote
control.
2 Search the disc
Press the [FM] or [AM] button.
Cancelling Direct Disc Search
Press the [38] button.
Direct Disc Search cannot be performed during playing
of Random play or scan play.
Function of Audio file/ Internal CD source
Music Select
Selecting the music you want to listen to from the
device or media being played now.
1 Enter Music Select mode
Turn the Control knob.
The music list is displayed.
2 Search for music
Select the category item using the Control
knob.
iPod source (“iPod Mode : ON”)
Operation type Operation
Movement between items Turn the Control knob.
Selection of item Press the Control knob.
Return to previous item Push the Control knob towards up.
Return to first item Push the Control knob towards up for at
least 1 second.
Other source
Audio file
Operation type Operation
Movement between items Turn the Control knob or push it towards
up or down.
Selection of item Push the Control knob towards right.
Return to previous item Push the Control knob towards left.
Return to first item Push the Control knob towards left for at
least 1 second.
Internal CD source
Operation type Operation
Movement between track Turn the Control knob or push it towards
up or down.
Selection of track Press the Control knob.
Return to first track Push the Control knob towards left for at
least 1 second.
The “2 or 3 symbol shown beside the displayed
item indicates that the item is preceded or followed
by another item.
Selecting a music will play it from the beginning.
Cancelling Music Select
Press the [FNC] button.
Music Select cannot be performed during Random play.
Set the iPod mode in “MENU” > “iPod Mode” of <Function
Control> (page 6).
B64-4049-00_00_E_English.indd 12B64-4049-00_00_E_English.indd 12 08.2.5 4:25:04 PM08.2.5 4:25:04 PM
English
|
13
Basic Operation of Disc Changer
(Optional)
Selecting CD changer source
Press the [SRC] button.
Select the “CD Changer” display.
For how to select source item, refer to <Power/
Source Select button> of <Basic Operation> (page
4).
Music search
Push the Control knob towards right or left.
Disc Search
Push the Control knob towards up or down.
Playing the Current Song or Disc Repeatedly.
(Repeat play)
Press the [4] button.
Pressing the button repeatedly selects Track Repeat
play on (“Track Repeat ON”), Disc Repeat play on
(“Disc Repeat ON”), and Repeat play off (“Repeat
OFF”) sequentially.
Randomly plays the music in the disc changer.
(Magazine random play)
Press the [6] button.
Pressing the button toggles the setting between
Magazine random play on (“Magazine RDM ON”)
and off (“Magazine RDM OFF”).
B64-4049-00_00_E_English.indd 13B64-4049-00_00_E_English.indd 13 08.2.5 4:25:04 PM08.2.5 4:25:04 PM
14
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Tuner Operation
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
“– – – –” is displayed.
2 Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency Press button
92.1 MHz (FM) [0], [9], [2], [1]
810 kHz (AM) [0], [8], [1], [0]
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
Station Preset Memory
Putting a station in the memory.
1 Select the frequency to put in the memory
Push the Control knob towards right or left.
2 Enter Preset Memory mode
Select “P.MEM”.
For how to select Function Control item, refer to
<Function Control> (page 6).
3 Select the number to put in the memory
Turn the Control knob.
4 Determine the number to put in the memory
Press the Control knob.
5 Allow the determined number to take effect
Press the Control knob.
Cancelling the Preset Memory mode
Press the [FNC] button.
This function can be operated with [1] — [6] button.
- Press the desired [1] — [6] button for at least 2 seconds.
Preset Tuning
Recalling the stations in the memory.
1 Enter Preset Tuning Select mode
Turn the Control knob.
A station list is displayed.
2 Select a desired station in the memory
Turn the Control knob.
3 Recall the station
Press the Control knob.
Cancelling Preset Tuning
Press the [FNC] button.
This function can be operated with [1] — [6] button.
- Press the desired [1] — [6] button.
B64-4049-00_00_E_English.indd 14B64-4049-00_00_E_English.indd 14 08.2.5 4:25:05 PM08.2.5 4:25:05 PM
English
|
15
PTY (Program Type)
Selecting the Program Type below and searching
for a station;
Program Type Display
Speech All Speech
Music All Music”
News “News
Current Affairs “Current Affairs”
Information “Information
Sport “Sport”
Education “Education
Drama “Drama”
Culture “Cultures
Science “Science
Varied “Varied Speech
Pop Music “Pop Music”
Rock Music “Rock Music”
Easy Listening
Music
“Easy Listening
M”
Light Classical “Light Classic
M”
Serious Classical “Serious
Classics”
Other Music Other Music”
Program Type Display
Weather “Weather &
Metr”
Finance “Finance
Childrens
programs
“Children's
Prog
Social Affairs “Social Affairs
Religion “Religion”
Phone In “Phone In”
Travel “Travel &
Touring
Leisure “Leisure &
Hobby”
Jazz Music Jazz Music”
Country Music Country Music”
National Music “National
Music”
Oldies Music “Oldies Music”
Folk Music “Folk Music”
Documentary “Documentary
Speech and Music include the Program type shown
below.
Music: Black character item.
Speech: White character item.
1 Enter PTY mode
Press the Control knob.
“PTY Select is displayed.
2 Select the Program Type
Turn the Control knob or push it towards up or
down.
3 Search for the selected Program Type station
Push the Control knob towards right or left.
4 Exit PTY mode
Press the Control knob.
This function cannot be used during a traffic bulletin or
AM reception.
When the selected Program Type is not found, “No PTY”
is displayed. Select another Program Type.
Program Type preset
Putting the Program Type in the Preset button
memory and quick recall.
Presetting the Program Type
1 Select the Program Type to preset
Refer to <PTY (Program Type)> (page 15).
2 Preset the Program Type
Press the desired [1] — [6] button for at least 2
seconds.
Recalling the preset Program Type
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 15).
2 Recall the Program Type
Press the desired [1] — [6] button.
Changing Language for PTY Function
Selecting the Program Type display language as
follows;
Language Display
English “English”
Spanish “Spanish
French “French”
Dutch “Dutch
Language Display
Norwegian “Norwegian”
Portuguese “Portuguese”
Swedish “Swedish
German German”
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 15).
2 Enter Changing Language mode
Press the [TI] button.
3 Select the language
Turn the Control knob or push it towards up or
down.
4 Exit Changing Language mode
Press the [TI] button.
B64-4049-00_00_E_English.indd 15B64-4049-00_00_E_English.indd 15 08.2.5 4:25:05 PM08.2.5 4:25:05 PM
16
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Other Functions
Now, you can use the unit.
If an incorrect code is entered, Waiting” is displayed, and
the input prohibition periods shown in the table below
is generated.
After the input prohibition time lapses, “SECURITY is
displayed, and you can reenter the code.
Number of times the
incorrect code was input
Input prohibited time
1—
2 5 minutes
3 1 hour
4 24 hours
Security Code
When Security Code is set, possibility of theft
is reduced because input of Security Code is
prompted to turn on the unit once it is turned off.
When you activate the Security Code function, it cannot be
released.
Note, your Security Code is the 4 digit number entered in
your “Car Audio Passport in this package.
1 Select Security Code item during Menu
mode (In Standby mode)
“Security Set is displayed.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Enter Security Code mode
Press the Control knob for at least 1 second.
When “Enter is displayed, “SECURITY SET is also
displayed.
3 Enter Security Code
Operation type Operation
Select the digits to enter Push the Control knob towards right
or left.
Select the Security Code
numbers
Turn the Control knob or push it
towards up or down.
4 Confirm the Security Code
Press the Control knob for at least 3 seconds.
When “Re-Enter is displayed, “SECURITY SET is also
displayed.
5 Do the step 3 through 4 operation, and reenter
the Security Code.
Approved” is displayed.
The Security Code function activates.
If you enter a Code different from your Security Code,
you have to start over from step 3.
6 Exit Security Code mode
Press the [FNC] button.
Entering Security Code
The Security Code is required to use the audio unit
when the unit is first used after removed from the
battery power source or the Reset button is pressed.
1 Turn the power ON.
2 Do the step 3 through 4 operation, and reenter
the security code.
Approved” is displayed.
Manual Clock Adjustment
1 Select Clock Adjustment item during Menu
mode (In Standby mode)
Select the “Clock Adjust” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Enter Clock adjustment mode
Press the Control knob for at least 1 second.
The clock display blinks.
3 Adjusting Clock
Operation type Operation
Selecting the item (hours or
minutes)
Push the Control knob towards right
or left.
Adjust each item Turn the Control knob or push it
towards up or down.
4 Exit Clock adjustment mode
Press the [FNC] button.
You can do this adjustment when “MENU” > “SYNC in
<Function Control> (page 6) is set to “OFF”.
B64-4049-00_00_E_English.indd 16B64-4049-00_00_E_English.indd 16 08.2.5 4:25:05 PM08.2.5 4:25:05 PM
Next page 3
English
|
17
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the unit.
1 Select AMP Control item during Menu mode
Select the AMP Control” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Enter AMP Control mode
Press the Control knob for at least 1 second.
3 Select the AMP Control item for adjustment
Push the Control knob towards up or down.
For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4 Adjust the AMP Control item
Push the Control knob towards right or left.
5 Exit AMP Control mode
Press the [FNC] button.
Date Adjustment
1
Select Date Adjustment item during Menu
mode (In Standby mode)
Select the “Date Adjust” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Enter Date adjustment mode
Press the Control knob for at least 1 second.
The date display blinks.
3 Adjusting Date
Operation type Operation
Selecting the item (month, day,
or year)
Push the Control knob towards right
or left.
Adjust each item Turn the Control knob or push it
towards up or down.
4 Exit Date adjustment mode
Press the [FNC] button.
Function of KDC-W7541U/W7541UY
Picture downloading
Downloading movies and wallpapers.
You can use downloaded pictures for the display of
this unit.
1 Connected the USB device
Connect the USB device containing the files to be
downloaded into this unit.
Insert a CD-R/CD-RW
Insert a CD-R/CD-RW containing files to be
downloaded into this unit.
Our URL http://www.kenwood.net-disp.com describes
how to make CD-R/CD-RW/USB device.
2 Select the picture downloading item during
Menu mode (In Standby mode)
Select the “DISP Data DL display.
For how to select Function Control items, refer to
<Function Control> (page 6).
3 Enter downloading mode
Press the Control knob for at least 1 second.
4 Select a media
Push the Control knob towards right or left.
Press the Control knob.
Select a USB device (“USB”) or CD-R/RW (“CD”).
5 Enter the downloading mode
Turn the Control knob to select YES”, and then
press the Control knob.
“File Check!!” display blinks.
6 Select files to be downloaded
Turn the Control knob or push it towards up or
down.
Press the Control knob.
7 Start downloading
Turn the Control knob to select YES”, and then
press the Control knob.
When the downloading finishes, “Finished” is
displayed.
Picture downloading may take as long as 20 minutes.
Cancelling Downloading
Press the [FNC] button.
8 Exit the downloading mode
Press the [FNC] button.
B64-4049-00_00_E_English.indd 17B64-4049-00_00_E_English.indd 17 08.2.5 4:25:05 PM08.2.5 4:25:05 PM
18
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Other Functions
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken
with you, helping to deter theft.
Removing the Faceplate
1 Press the Release button.
Drop open the faceplate.
2 Drawing the faceplate to left side pull it to
forward and remove it.
¤
The faceplate is a precision piece of equipment and can
be damaged by shocks or jolts.
Keep the faceplate in its faceplate case while detached.
Do not expose the faceplate (and the faceplate case) to
direct sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of water
splashing.
Reattaching the Faceplate
1 Align the shaft on the unit with the depression
on the faceplate.
2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use
the unit.
Do not operate this unit while downloading to prevent
data from being damaged.
The number of files that can be downloaded.
- Downloaded movie: 1 file
- Wallpaper: 1 file
When a new wallpaper is downloaded, it is overwritten
to the currently downloaded wallpaper.
There is no way to delete the downloaded pictures.
The downloaded pictures can be used for display.
“DISP” > “GRAPH” of <Function Control> (page 6)
When you cannot download the pictures to this unit,
there may be a problem with the CD-R/CD-RW/USB
device write method.
Refer to the URL http://www.kenwood.net-disp.com.
PICTURE ENGINE
Picture Engine is an application software
distributed from Kenwood's official website.
Utilizing this software, you can create an original
still image file. As for the download of application,
please browse http://www.kenwood.net-disp.
com/ for directions.
Demonstration mode setting
Turning the demonstration mode ON/OFF.
1 Select Demonstration item during Menu mode
Select the “DEMO Mode display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Pressing this button for 2 seconds or longer toggles
the setting between “ON” and “OFF”.
3 Exit Demonstration mode
Press the [FNC] button.
B64-4049-00_00_E_English.indd 18B64-4049-00_00_E_English.indd 18 08.2.5 4:25:06 PM08.2.5 4:25:06 PM
English
|
19
Audio Control
You can adjust following Audio Control items ;
Adjustment Item Display Range
Rear volume “REAR VOLUME” 0 — 35
Subwoofer level “SUB-W LEVEL –15 — +15
System Q “NATURAL”/
“USER”/“ROCK”/
“POPS”/“EASY”/
“TOP40”/“JAZZ”/
Natural/User setting/Rock/
Pops/Easy/Top 40/Jazz
(The indicator turns on
according to the setting.)
Bass level* “BASS LEVEL –8 — +8
Middle level* “MIDDLE LEVEL –8 — +8
Treble level* “TREBLE LEVEL –8 — +8
Balance “BALANCE” Left 15 — Right 15
Fader “FADER” Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
* You can adjust these items in detail. Refer to <Adjusting
the detail of Audio Control> (Page 19). (Function of KDC-
W7541U/W7541UY)
* Source tone memory: Puts the set up value in the
memory per source. (Detail Audio item is included)
“USER”: The ranges selected lastly for Bass level, Middle
level, and Treble level are recalled automatically.
1 Select the source to adjust
For how to select source item, refer to <Power/
Source Select button> of <Basic Operation> (page
4).
2 Enter Audio Control mode
Press the [AUD] knob.
3 Select the Audio item to adjust
Press the [AUD] knob.
4 Adjust the Audio item
Turn the [AUD] knob.
5 Exit Audio Control mode
Press any button.
Press a button other than the [AUD] knob and
[ATT] button.
Function of KDC-W7541U/W7541UY
Adjusting the detail of Audio Control
Among the Basic Audio items, you can adjust the
Bass level, Middle level, and Treble level in detail.
Bass level
Adjustment Item Display Range
Bass Center Frequency “BASS FRQ” 40/50/60/70/80/100/
120/150 Hz
Bass Q Factor “BASS Q FACTOR” 1.00/1.25/1.50/2.00
Bass Extend “BASS EXT” OFF/ON
Middle level
Adjustment Item Display Range
Middle Center Frequency “MIDDLE FRQ” 0.5/1.0/1.5/2.0 kHz
Middle Q Factor “MIDDLE Q FACTOR” 1.00/2.00
Treble level
Adjustment Item Display Range
Treble Center Frequency “TREBLE FRQ” 10.0/12.5/15.0/17.5 kHz
1 Select the Basic Audio item
Select the desired item to be set in detail from
followings;
• Bass level
• Middle level
• Treble level
For how to select Basic Audio items, see <Audio
Control> (page 19).
2 Enter Detail adjustment mode of Audio
Control
Press the [AUD] knob for at least 1 second.
3 Select the Detail Audio item to adjust
Press the [AUD] knob.
4 Adjust the Detail Audio item
Turn the [AUD] knob.
5 Exit the Detail Audio Control mode
Press the [AUD] knob for at least 1 second.
When you set the Bass Extend to ON, low frequency
response is extended by 20%.
You can exit the Audio Control mode at anytime by
pressing any button except for [AUD] knob and [ATT]
button.
Audio Adjustments
B64-4049-00_00_E_English.indd 19B64-4049-00_00_E_English.indd 19 08.2.5 4:25:06 PM08.2.5 4:25:06 PM
20
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Audio Adjustments
Audio Setup
You can set Sound system , such as follows;
Adjustment Item Display Range
Front High Pass Filter “HPF-F” Through/40*
1
/ 60*
1
/80/100/
120/150/180/220*
1
Hz
Rear High Pass Filter “HPF-R” Through/40*
1
/ 60*
1
/80/100/
120/150/180/220*
1
Hz
Low Pass Filter “LPF” 50*
1
/60/80/100*
1
/120/
Through Hz
Subwoofer Phase “SW PHASE” Reverse (180°)/ Normal (0°)
Volume offset “VOL-OFFSET” –8 — ±0 (AUX: -8— +8)
Loudness “LOUD” OFF/ON
Dual Zone System “2 ZONE” OFF/ON
*
1
KDC-W7541U/W7541UY only.
Volume offset: Sets each source’s volume as a difference
from the basic volume.
Loudness: Compensates for low and high tones during
low volume. (Only the low tone is compensated for
when the tuner is selected as a source.)
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by “Zone2” of
<Function Control> (page 6).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by [AUD] knob.
- Adjust the volume of Rear channel by <Audio Control>
(page 19) or [5]/[] button on the remote control
(page 22).
- The Audio Control has no effect on sub source.
1 Select the source to adjust
For how to select source item, refer to <Power/
Source Select button> of <Basic Operation> (page
4).
2 Enter Audio Setup mode
Press the [AUD] knob for at least 1 second.
3 Select the Audio Setup item to adjust
Press the [AUD] knob.
4 Adjust the Audio setup item
Turn the [AUD] knob.
5 Exit Audio Setup mode
Press the [AUD] knob for at least 1 second.
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type as follows;
Speaker type Display
OFF “OFF”
For 5 & 4 in. speaker “5/4inch”
For 6 & 6x9 in. speaker “6x9/6inch
For the OEM speaker “O.E.M.
1 Enter Standby
Select the “STANDBY” display.
For how to select source item, refer to <Power/
Source Select button> of <Basic Operation> (page
4).
2 Enter Speaker Setting mode
Press the [AUD] knob.
“SP SEL is displayed.
3 Select the Speaker type
Turn the [AUD] knob.
4 Exit Speaker Setting mode
Press the [AUD] knob.
B64-4049-00_00_E_English.indd 20B64-4049-00_00_E_English.indd 20 08.2.5 4:25:06 PM08.2.5 4:25:06 PM
English
|
21
Audio Preset Memory
Registering the value setup by Sound Control. The
memory cannot be erased by the Reset button.
1 Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 19)
- <Audio Setup> (page 20)
2 Select Audio Preset item during Menu
mode (Other than Standby mode)
Select the Audio Preset” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
3 Enter Audio Preset mode
Press the Control knob for at least 1 second.
4 Select the Audio Preset Memory
Turn the Control knob.
Select the “Memory display.
5 Determine whether to put the Audio Preset in
the memory
Press the Control knob.
“Memory?” is displayed.
6 Put the Audio Preset in the memory
Turn the Control knob to select YES”, and then
press the Control knob.
“Memory Completed” is displayed.
7 Exit Audio Preset mode
Press the [FNC] button.
Register 1 pair of Audio Preset Memory. You cannot
register by the source.
When you press the Reset, all the sources will be the
setting value which is registered.
The following items cannot be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volume
Audio Preset Recall
Recalling the sound setup registered by <Audio
Preset Memory> (page 21).
1 Select the source
For how to select source item, refer to <Power/
Source Select button> of <Basic Operation> (page
4).
2 Select Audio Preset item during Menu
mode (Other than Standby mode)
Select the Audio Preset” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
3 Enter Audio Preset mode
Press the Control knob for at least 1 second.
4 Select the Audio Preset Recall
Turn the Control knob.
Select the “Recall” display.
5 Determine whether to recall the Audio Preset
Press the Control knob.
“Recall?” is displayed.
6 Recall the Audio Preset
Turn the Control knob to select YES”, and then
press the Control knob.
“Recall Completed” is displayed.
7 Exit Audio Preset mode
Press the [FNC] button.
The User memory of “SYSTEM Q” in <Audio Control>
(page 19) is changed to the value which was recalled.
The source tone memory item of <Audio Control> (page
19) is changed to the value which was recalled by the
selected source.
B64-4049-00_00_E_English.indd 21B64-4049-00_00_E_English.indd 21 08.2.5 4:25:07 PM08.2.5 4:25:07 PM
22
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Basic Operations of remote control
ATT
DIRECT
0 — 9
SRC
VOL
AUD
FM/AM/
+
/
2-ZONE
General control
Volume control [VOL]
Source select [SRC]
Volume reduce [ATT]
In Audio control
Audio item select [AUD]
Adjusts the Audio item [VOL]
Refer to <Audio Control> (page 19) for the operation
method, such as the procedures for Audio control and
others operations.
Dual Zone control
Dual zone system on and off [2-ZONE]
Rear channel volume control
[ 5]/ []
In Tuner source
Band select [FM]/[AM]
Station select
[4]/[¢]
Recall preset stations [1] — [6]
In CD/USB source
Music select [4]/[¢]
Folder/Disc select [FM]/[AM]
Pause/Play [38]
About [ ]
This button is used when Bluetooth HANDS FREE
BOX is connected. For more information, refer to the
instruction manual of Bluetooth HANDS FREE BOX.
¤
• Do not set the remote control in hot places such as
on the dashboard.
Loading and Replacing battery
Use two “AA”/ “R6”-size batteries.
Slide the cover while pressing downwards to remove
it as illustrated.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
Accessory of KDC-W7541U/KDC-W7541UY/KDC-W7141UY
(page 14)
B64-4049-00_00_E_English.indd 22B64-4049-00_00_E_English.indd 22 08.2.5 4:25:07 PM08.2.5 4:25:07 PM
English
|
23
Appendix
About Audio file
Playable Audio file
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)
Playable disc media
CD-R/RW/ROM
Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Playable USB device
USB mass storage class
Playable USB device file system
FAT16, FAT32
Although the audio files are complied with the
standards listed above, the play maybe impossible
depending on the types or conditions of media or
device.
Playing order of the Audio file
In the example of folder/file tree shown below, the
files are played in the order from to .
CD
v

()
<
: Folder
v
: Audio 

v

v
v
v.

v
Folder
Audio file
An online manual about audio files is put on the
site, www.kenwood.com/audiofile/. On this online
manual, detailed information and notes which are not
written in this manual are provided. Make sure to read
through the online manual as well.
In this manual, the word “USB device” is used for flash
memories and digital audio players which have USB
terminals.
The word “iPod” appearing in this manual indicates the
iPod connected with the iPod connection cable (optional
accessory). The iPod connected with the iPod connection
cable can be controlled from this unit. iPods that can be
connected with the iPod connection cable are the iPod
nano, Fifth Generation iPod, iPod classic, and iPod touch.
Other iPods cannot be connected.
About USB device
• If you start playback after connecting the iPod, the
music that has been played by the iPod is played
first.
In this case, “RESUMING” is displayed without
displaying a folder name, etc. Changing the browse
item will display a correct title, etc.
• When the iPod is connected to this unit,
“KENWOOD” or is displayed on the iPod to
indicate that you cannot operate the iPod.
• When the USB device is connected to this unit,
it can be charged up provided that this unit is
powered.
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
• You cannot connect a USB device via a USB hub and
Multi Card Reader.
• Take backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage
arising out of erasure of the stored data.
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
• When connecting the USB device, usage of the CA-
U1EX (option) is recommended.
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
About KENWOOD “Music Editor” of PC
application
• “Music Editor” is recorded in the CD-ROM attached
to this unit.
• Refer to the users manual recorded in the
installation CD-ROM and Help of “Music Editor” for
the operation method of “Music Editor.
• The unit can play USB device created by “Music
Editor.
• Information about “Music Editor upgrade is put on
the site, www.kenwood.com.
B64-4049-00_00_E_English.indd 23B64-4049-00_00_E_English.indd 23 08.2.5 4:25:07 PM08.2.5 4:25:07 PM
24
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Appendix
For operating KCA-BT100 (Optional)
However, the following control methods of the
function for this unit may be different from the
Instruction manual; therefore, refer to the following
supplemental instruction.
<Deleting a Registered Cell-Phone>
1–3. Operation is the same. Refer to the instruction
manual of KCA-BT100.
4. Press the Control knob.
5. Select “YES” using the Control knob.
6. Press the Control knob.
7. Press the [FNC] button.
<Menu System>
For how to operate Menu, refer to <Function
Control> in this instruction manual.
About display
Cell-Phone Status is displayed in the status display of
this unit.
Moreover, some displays are different from the
description of KCA-BT100 Instruction Manual.
Displays of KCA-BT100 Instruction
Manual
Actual displays on this unit
“Disconnect” “HF Disconnect”
“Connect” “HF Connect”
“Phone Delete” “Device Delete”
“Phone Status “BT DVC Status”
BT : Displays the bluetooth connection status.
This indicator turns on when a cell-phone is
connected to this unit.
This Product is not installed by the manufacturer of a
vehicle on the production line, nor by the professional
importer of a vehicle into an EU Member State.
Information on Disposal of Old Electrical
and Electronic Equipment (applicable for
EU countries that have adopted separate
waste collection systems)
Products with the symbol (crossed-out
wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment
should be recycled at a facility capable
of handling these items and their waste
byproducts. Contact your local authority
for details in locating a recycle facility
nearest to you. Proper recycling and waste
disposal will help conserve resources whilst
preventing detrimental effects on our
health and the environment.
The marking of products using lasers
(Except for some areas)
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and says
that the component uses laser beams that have been
classified as Class 1. It means that the unit is utilizing
laser beams that are of a weaker class. There is no
danger of hazardous radiation outside the unit.
B64-4049-00_00_E_English.indd 24B64-4049-00_00_E_English.indd 24 08.2.5 4:25:08 PM08.2.5 4:25:08 PM
English
|
25
Menu Glossary
• SRC Select
Setting up the Source Select mode.
1 : Displays source icons for your choice.
2 : Allows you to select sources one after another.
• Display
If this unit is not operated at least 5 seconds with
“OFF” selected, the display turns off. During a setup
mode, the display will not turn off even if 5 seconds
lapse.
ILM Dimmer (illumination dimmer)
Reduces the key Illumination brightness.
AUTO: Dims the illumination in conjunction with
the Light switch of the vehicle.
OFF: Does not dim the illumination.
SWPRE (Switching Preout)
Switches the preout between rear output (“Rear”)
and subwoofer output (“Sub-W”).
• AMP
Selecting “OFF” turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
Zone2 (Dual Zone)
Set the destination (front speaker “Front” or rear
speaker “Rear”) of the sub source (AUX IN) when the
Dual Zone function is turned on.
• Supreme
Technology to extrapolate and supplement with
proprietary algorithm, the high-frequency range
that is cut off when encoding at low bit rate (less
than 128Kbps, Sampling frequency is 44.1kHz).
Supplementing is optimized by compression
format (AAC, MP3 or WMA) and processed
according to bit rate.
The effect is negligible with music that is encoded
at high bit rate, variable bit rate or has minimal high
frequency range.
News (News Bulletin with Timeout Setting)
Automatically receives news bulletin when it
starts. Set the time during which interrupt is to be
disabled after start of another news bulletin.
Changing “News 00min” to “News 90min” turns this
function ON.
If news bulletin starts when this function is ON,
Traffic INFO” is displayed and news is received. If
“20min is has been set, reception of another news
bulletin will not start for 20 minutes.
The news bulletin volume is the same level that
was set for Traffic Information.
Seek Mode (Tuning mode select)
Select a tuning mode of the radio.
Tuning mode Display Operation
Auto seek Auto1” Automatic search for a station.
Preset station seek Auto2” Search in order of the stations in the
Preset memory.
Manual “Manual” Normal manual tuning control.
AF (Alternative Frequency)
When the reception is poor, automatically alternate
to another frequency broadcasting the same
program in the same RDS network with better
reception.
Russian (Russian language setting)
When this is set to ON, the following character
strings are displayed in Russian:
Folder name/ File name/ Song title/ Artist name/
Album name/ KCA-BT100 (optional accessory)
Power OFF (Power OFF Timer)
Setting the timer to turn this unit’s power OFF
automatically when Standby mode continues.
Using this setting can save the vehicles battery
power.
– – –: Power OFF Timer function is OFF.
20min: Turns the power OFF after 20 minutes.
(Factory setting)
40min: Turns the power OFF after 40 minutes.
60min: Turns the power OFF after 60 minutes.
• CD Read
Sets the method for reading CD.
When unable to play special format CD, set this
function to “2” to force playing. Note that some
music CD may be unplayable even when set to “2”.
In addition, audio files cannot be played when set
to “2”. Normally, keep this set to “1”.
1 : Automatically distinguishes between audio file
disc and music CD when playing disc.
2 : Forces playing as music CD.
B64-4049-00_00_E_English.indd 25B64-4049-00_00_E_English.indd 25 08.2.5 4:25:08 PM08.2.5 4:25:08 PM
26
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Accessories/ Installation Procedure
Accessories
1
..........1
2
..........2
Installation Procedure
1. To prevent short circuits, remove the key from the
ignition and disconnect the - terminal of the
battery.
2. Make the proper input and output wire
connections for each unit.
3. Connect the wire on the wiring harness.
4. Take Connector B on the wiring harness and
connect it to the speaker connector in your vehicle.
5. Take Connector A on the wiring harness and
connect it to the external power connector on your
vehicle.
6. Connect the wiring harness connector to the unit.
7. Install the unit in your car.
8. Reconnect the - terminal of the battery.
9. Press the reset button.
¤
Mounting and wiring this product requires skills and
experience. For safetys sake, leave the mounting and wiring
work to professionals.
Make sure to ground the unit to a negative 12V DC power
supply.
Do not install the unit in a spot exposed to direct sunlight
or excessive heat or humidity. Also avoid places with too
much dust or the possibility of water splashing.
Do not use your own screws. Use only the screws provided.
If you use the wrong screws, you could damage the unit.
If the power is not turned ON (“Protect” is displayed), the
speaker wire may have a short-circuit or touched the
chassis of the vehicle and the protection function may
have been activated. Therefore, the speaker wire should be
checked.
Make sure that all wire connections are securely made by
inserting jacks until they lock completely.
If your vehicle’s ignition does not have an ACC position, or
if the ignition wire is connected to a power source with
constant voltage such as a battery wire, the power will not
be linked with the ignition (i.e., it will not turn on and off
along with the ignition). If you want to link the unit’s power
with the ignition, connect the ignition wire to a power
source that can be turned on and off with the ignition key.
Use a commercially available conversion connector if the
connector does not fit in the vehicle connector.
Insulate unconnected wires with vinyl tape or other similar
material. To prevent a short circuit, do not remove the caps
on the ends of the unconnected wires or the terminals.
If the console has a lid, make sure to install the unit so that
the faceplate will not hit the lid when closing and opening.
If the fuse blows, first make sure the wires aren’t touching
to cause a short circuit, then replace the old fuse with one
with the same rating.
Connect the speaker wires correctly to the terminals to
which they correspond. The unit may be damaged or fail to
work if you share the - wires or ground them to any metal
part in the car.
After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
Mount the unit so that the mounting angle is 30° or less.
About CD players/disc changers connected
to this unit
If the CD player/ disc changer has the “O-N” switch, set
it to the “N” position.
The functions you can use and the information that
can be displayed may differ depending on the models
being connected.
B64-4049-00_00_E_English.indd 26B64-4049-00_00_E_English.indd 26 08.2.5 4:25:08 PM08.2.5 4:25:08 PM
English
|
27
Connecting Wires to Terminals
P.CONT
ANT.CONT
MUTE
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
LR
LR
KDC-W7541U/KDC-W7541UY
KDC-W7041U/KDC-W7141UY
REMO.CONT
Battery wire (Yellow)
Ignition wire (Red)
FM/AM antenna input (JASO)
Antenna Cord
Wiring harness
(Accessory1)
If no connections are made, do not
let the wire come out from the tab.
Power control/Motor antenna
control wire (Blue/White)
TEL mute wire (Brown)
Connect either to the power control terminal
when using the optional power amplifier, or to the
antenna control terminal in the vehicle.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
See next page
To Kenwood disc changer/External optional accessory
Rear output/Sub Woofer output
USB connector (1m)
To USB device
Fuse (10A)
Front output
Front output
To External Display/ Steering remote
KDC-W7541U/W7041U only
AUX input (Stereo)
Use the mini-plug which is stereo type and does not have
any resistance.
Rear output
Sub Woofer output
To use the steering wheel remote control feature, you
need to an exclusive remote adapter (not supplied)
matches your car is required.
Steering remote control (Light
Blue/Yellow)
KDC-W7541UY/W7141UY only
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
To connect the Kenwood navigation system,
consult your navigation manual.
Do not remove the cap when you do not use the USB
cable. The connector will cause the unit to malfunction
if it gets in touch with any metallic part of the vehicle.
B64-4049-00_00_E_English.indd 27B64-4049-00_00_E_English.indd 27 08.2.5 4:25:08 PM08.2.5 4:25:08 PM
28
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Connecting Wires to Terminals
Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Colour Functions
External Power
Connector
A-4 Yellow Battery
A-5 Blue/White Power Control
A-6 Orange/White Dimmer
A-7 Red Ignition (ACC)
A-8 Black Earth (Ground)
Connection
Speaker
Connector
B-1 Purple Rear Right (+)
B-2 Purple/Black Rear Right (–)
B-3 Gray Front Right (+)
B-4 Gray/Black Front Right (–)
B-5 White Front Left (+)
B-6 White/Black Front Left (–)
B-7 Green Rear Left (+)
B-8 Green/Black Rear Left (–)
2WARNING
Connecting the ISO Connector
The pin arrangement for the ISO connectors depends on
the type of vehicle you drive. Make sure to make the proper
connections to prevent damage to the unit.
The default connection for the wiring harness is described in
1 below. If the ISO connector pins are set as described in 2,
make the connection as illustrated.
Please be sure to reconnect the cable as shown 2 below to
install this unit to the Volkswagen vehicles etc.
1 (Default setting) The A-7 pin (red) of the vehicle’s
ISO connector is linked with the ignition, and the A-
4 pin (yellow) is connected to the constant power
supply.
Unit Vehicle
A-7 Pin (Red)
A-4 Pin (Yellow)
Ignition cable (Red)
Battery cable (Yellow)
2 The A-7 pin (red) of the vehicles ISO connector is
connected to the constant power supply, and the
A-4 pin (yellow) is linked to the ignition.
Unit Vehicle
A-7 Pin (Red)
A-4 Pin (Yellow)
Ignition cable (Red)
Battery cable (Yellow)
B64-4049-00_00_E_English.indd 28B64-4049-00_00_E_English.indd 28 08.2.5 4:25:09 PM08.2.5 4:25:09 PM
English
|
29
Installation/Removing the Unit
Installation
Firewall or metal support
Screw (M4 × 8 mm)
(commercially available)
Self-tapping screw
(commercially available)
Metal mounting strap
(commercially available)
Bend the tabs of the
mounting sleeve with a
screwdriver or similar utensil
and attach it in place.
Make sure that the unit is installed securely in place. If the
unit is unstable, it may malfunction (for example, the sound
may skip).
Removing the hard rubber frame
1
Engage the catch pins on the removal tool and
remove the two locks on the upper level.
Upper the frame and pull it forward as shown in
the figure.
Catch
Lock
Accessory2
Removal tool
2 When the upper level is removed, remove the
lower two locations.
The frame can be removed from the bottom side in the
same manner.
Removing the Unit
1 Refer to the section <Removing the hard rubber
frame> and then remove the hard rubber frame.
2 Remove the screw (M4 × 8) on the back panel.
3 Insert the two removal tools deeply into the slots
on each side, as shown.
4 Lower the removal tool toward the bottom, and
pull out the unit halfway while pressing towards
the inside.
Screw (M4X8)
(commercially available)
Accessory2
¤
Be careful to avoid injury from the catch pins on the
removal tool.
5 Pull the unit all the way out with your hands, being
careful not to drop it.
B64-4049-00_00_E_English.indd 29B64-4049-00_00_E_English.indd 29 08.2.5 4:25:09 PM08.2.5 4:25:09 PM
30
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Troubleshooting Guide
Some functions of this unit may be disabled by
some settings made on this unit.
! Cannot set up the subwoofer.
• Cannot set up the High Pass Filter.
Cannot set up the Fader.
No Audio control effect on AUX.
Preout is not set to subwoofer. “MENU” > “SWPRE”
of <Function Control> (page 6)
<Subwoofer output> of <Basic Operation> (page 4)
is not set to On.
The Dual zone function is enabled. <Audio
Setup> (page 20)
! Cannot set up the subwoofer phase.
The Low Pass Filter is set to Through. <Audio
Setup> (page 20)
! Cannot select the output destination of the
subsource in the Dual zone.
Cannot adjust the volume of the rear speakers.
The Dual zone function is disabled. <Audio
Setup> (page 20)
! Cannot register a security code.
Cannot set up Display Illumination Control.
<Demonstration mode Setting> (page 18) is not
turned off.
! Cannot set up the Power-off timer.
<Security Code> (page 16) is not set.
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
General
? The Touch Sensor Tone does not sound.
The preout jack is being used.
The Touch Sensor Tone cannot be output from
the preout jack.
? The illumination flashes when the knob or button
is operated.
This is the key illumination effect.
You set this effect in “MENU” > “ILM Effect” of
<Function Control> (page 6).
Tuner source
? Radio reception is poor.
The car antenna is not extended.
Pull the antenna out all the way.
Disc source
? The specified disc does not play, but another one
plays instead.
The specified CD is quite dirty.
Clean the CD, referring to the CD cleaning of the
section on <Handling CDs> (page 3).
The disc is loaded in a different slot from that
specified.
Eject the disc magazine and check the number
for the specified disc.
The disc is severely scratched.
Try another disc instead.
Audio file source
? The sound skips when an Audio file is being
played.
The media is scratched or dirty.
Clean the media, referring to the CD cleaning of
the section on <Handling CDs> (page 3).
The recording condition is bad.
Record the media again or use another media.
? Noise is heard when carrying out Folder Search.
Noise may be produced if folders without audio files
exist continuously in the playing media.
Do not make folders without audio files.
B64-4049-00_00_E_English.indd 30B64-4049-00_00_E_English.indd 30 08.2.5 4:25:10 PM08.2.5 4:25:10 PM
English
|
31
The messages shown below display your
systems condition.
TOC Error: No disc has been loaded in the disc
magazine.
The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.
Error 05: The disc is unreadable.
Error 77: The unit is malfunctioning for some reason.
Press the reset button on the unit. If the
“Error 77” code does not disappear, consult
your nearest service center.
Mecha Error: Something is wrong with the disc magazine.
Or the unit is malfunctioning for some reason.
Check the disc magazine. And then press
the reset button on the unit. If the “Mecha
Error” code does not disappear, consult
your nearest service center.
IN (Blink): The CD player section is not operating
properly.
Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
Protect: The speaker wire has a short-circuit or
touches the chassis of the vehicle, and then
the protection function is activated.
Wire or insulate the speaker cable properly
and press the reset button. If the “Protect”
code does not disappear, consult your
nearest service center.
Unsupported File:
An Audio file is played with a format that this
unit can’t support.
Copy Protection:
A copy-protected file is played.
Read Error: The file system of the connected USB device
is broken.
Copy the files and folders for the USB
device again. If the error message is still
displayed, initialize the USB device or use
other USB devices.
No Device: The USB device is selected as a source
although no USB device is connected.
Change the source to any source other
than USB. Connect an USB device, and
change the source to USB again.
N/A Device: An unsupported USB device is connected.
No Music Data/ Error 15:
The connected USB device contains no
playable audio file.
Media was played that does not have data
recorded that the unit can play.
USB ERROR (Blink):
Some trouble may have occurred to the
connected USB device.
Remove the USB device, then cycle the
power switch to ON. If the same display is
repeated, use another USB device.
iPod Error: Connection to the iPod has failed.
Check that the connected iPod is an iPod
that is supported. See <About Audio file>
(page 23) for information on supported
iPods.
Remove the USB device and then
reconnect it.
Confirm that the software for the iPod is
the latest version.
USB REMOVE: The Remove mode has been selected for the
USB device/iPod. You can remove the USB
device/iPod safely.
B64-4049-00_00_E_English.indd 31B64-4049-00_00_E_English.indd 31 08.2.5 4:25:10 PM08.2.5 4:25:10 PM
32
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Specifications
FM tuner section
Frequency range (50 kHz space)
: 87.5 MHz – 108.0 MHz
Usable sensitivity (S/N = 26dB)
: 0.7 V/75 Ω
Quieting Sensitivity (S/N = 46dB)
: 1.6 V/75 Ω
Frequency response (±3.0 dB)
: 30 Hz – 15 kHz
Signal to Noise ratio (MONO)
: 65 dB
Selectivity (DIN) (±400 kHz)
: ≥ 80 dB
Stereo separation (1 kHz)
: 35 dB
MW tuner section
Frequency range (9 kHz space)
: 531 kHz – 1611 kHz
Usable sensitivity (S/N = 20dB)
: 25 µV
LW tuner section
Frequency range
: 153 kHz – 281 kHz
Usable sensitivity (S/N = 20dB)
: 45 µV
CD player section
Laser diode
: GaAlAs
Digital filter (D/A)
: 8 Times Over Sampling
D/A Converter
: 24 Bit
Spindle speed
: 500 – 200 rpm (CLV)
Wow & Flutter
: Below Measurable Limit
Frequency response (±1 dB)
: 10 Hz – 20 kHz
Total harmonic distortion (1 kHz)
: 0.008 %
Signal to Noise ratio (1 kHz)
: 110 dB
Dynamic range
: 93 dB
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
AAC decode
: AAC-LC ".m4a" files
USB Interface
USB Standard
: USB1.1/ 2.0
Maximum Supply current
: 500 mA
File System
: FAT16/ 32
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
AAC decode
: AAC-LC ".m4a" files
Audio section
Maximum output power
: 50 W x 4
Output power (DIN 45324, +B=14.4V)
: 30 W x 4
Speaker Impedance
: 4 – 8 Ω
Tone action
Bass : 100 Hz ±8 dB
Middle : 1 kHz ±8 dB
Treble : 10 kHz ±8 dB
Preout level / Load (CD)
KDC-W7541U/W7541UY : 4000 mV/10 kΩ
KDC-W7041U/W7141UY : 2500 mV/10 kΩ
Preout impedance
: ≤ 600 Ω
Auxiliary input
Frequency response (±1 dB)
: 20 Hz – 20 kHz
Input Maximum Voltage
: 1200 mV
Input Impedance
: 100 kΩ
General
Operating voltage (11 – 16V allowable)
: 14.4 V
Current consumption
: 10 A
Installation Size (W x H x D)
: 182 x 53 x 155 mm
Weight
: 1.40 kg
B64-4049-00_00_E_English.indd 32B64-4049-00_00_E_English.indd 32 08.2.5 4:25:10 PM08.2.5 4:25:10 PM
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood KDC-7537UY bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood KDC-7537UY in de taal/talen: Engels als bijlage per email.

De handleiding is 0,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Kenwood KDC-7537UY

Kenwood KDC-7537UY Gebruiksaanwijzing - Nederlands - 96 pagina's

Kenwood KDC-7537UY Gebruiksaanwijzing - Nederlands - 46 pagina's

Kenwood KDC-7537UY Gebruiksaanwijzing - Deutsch, Français - 96 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info