606999
10
Verklein
Vergroot
Pagina terug
1/121
Pagina verder
weighing function (TYPE FDM79 only)
Y
our food processor is fitted with a built in weighing function
to allow ingredients to be weighed straight into the bowl or
b
lender goblet.
T
he Maximum weighing capacity is 3Kg. This is the total
weight of all the ingredients including the weight of the bowl
o
r goblet.
to use the weighing function
1 Always fit the bowl, detachable drive shaft and attachment
or blender goblet onto the power unit before adding
i
ngredients.
2 Plug in – the display screen will
remain blank.
3
Press the ON/ZERO button once
and the display screen will light
up.
4 Press the (kg/lb) button to select
either grams or ounces. The
display will default to kg/g when
first switched on.
The unit weighs in 1g increments
and teaspoon/tablespoon
measures are recommended for
weighing small quantities.
5 Check the display shows ‘0’, if not, zero by pressing the
ON/ZERO button. Then weigh the required ingredients
straight into the bowl or goblet. After the weight is displayed,
press the ON/ZERO button and the display will return to ‘0’.
Add the next ingredients and that weight will be displayed.
Repeat until all ingredients are weighed.
If the display is not zeroed and either the ingredients or the
bowl/attachment/lid are removed the display will show
[ - - - -] to represent a minus reading.
To zero press the ON/ZERO button once.
6 Add the lid and select a speed to operate the processor.
During operation the display screen will freeze [- - - -] until
the speed control returned to the ‘OFF’ position.
After processing the last weight will be displayed on the
screen when the speed control is returned to the ‘OFF’
position. Note: The weight of the lid will be included if the
display is not zeroed before switching on.
The weight of any additional ingredients added down the
feed tube whilst the processor is running will not be shown
on the display screen.
bo
weighing tray
A removable weighing tray is
supplied for weighing
ingredients without the bowl or
blender.
To use, place the tray on top of
the power unit. Then follow
steps 2 to 5 under ‘to use the
weighing function’.
To remove, just lift the tray off.
auto switch off
The display screen will turn off automatically if the same
weight reading is shown after 5 minutes.
The display screen can be turned off manually by pressing
and holding down the ON/ZERO button for a few seconds.
i
mportant
Do not overload by exceeding the maximum weighing
c
apacity of 3Kg. The display will show [0 – Ld] if the
weighing function is overloaded.
D
o not subject the power unit to excessive force as this may
damage the weighing sensor.
A
lways place the processor on a dry flat surface prior to
w
eighing.
Do not move the power unit during operation of the
w
eighing function.
to use your thermoresist blender
1
Fit the sealing ring
bs
i
nto the blade unit
bt
-
ensuring the
seal is located correctly in the grooved area.
Leaking will occur if the seal is damaged or
i
ncorrectly fitted.
2
Clip the blade unit
bt
i
nto the base
ck
.
3 Screw the blade assembly onto the goblet - ensuring the
blade assembly is fully tightened
4
. Refer to the graphics
on the underside of the blade unit as follows:
- unlocked position
- locked position
The blender will not work if incorrectly
assembled.
4 Put your ingredients into the goblet.
5 Fit the lid to the goblet and push down to secure
5
. Fit the
filler cap.
6 Place the blender onto the power unit, and turn clockwise
6
to lock.
The appliance will not operate if the blender is
incorrectly fitted to the interlock.
7 Select a speed (refer to the recommended speed chart) or
use the pulse control.
hints
When making mayonnaise, put all the ingredients, except
the oil, into the blender. Remove the filler cap. Then, with the
appliance running, add the oil slowly through the hole in the
lid.
Thick mixtures, e.g. pâtés and dips, may need scraping
down. If the mixture is difficult to process, add more liquid.
Ice crushing - operate the pulse in short bursts until crushed to
the desired consistency.
The processing of spices is not recommended as they may
damage the plastic parts.
The appliance will not work if the blender is incorrectly fitted.
To blend dry ingredients - cut into pieces, remove the filler
cap, then with the appliance running, drop the pieces down
one by one. Keep your hand over the opening. For best
results empty regularly.
Don’t use the blender as a storage container. Keep it empty
before and after use.
Never blend more than 1.5 litres (53 fl oz) - less for frothy
liquids like milkshakes.
8
10

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Kenwood-FDM79

Zoeken resetten

  • als ik de rasp schijf geplaatst heb past de deksel met vulopening niet op de rasp Gesteld op 10-9-2022 om 16:45

    Reageer op deze vraag Misbruik melden
  • Ik heb een Kenwood keukenmachine type FDM79 te leen gekregen van mijn dochter.Nou heb ik in mijn onwetendheid de mengbeker er verkeerd op gezet. Handvat naar links en nou krijg ik hem op geen enkele manier meer los. Heeft iemand een idee hoe ik dit op kan lossen. BVD Gesteld op 12-1-2022 om 15:45

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood FDM79 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood FDM79 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info