30499
14
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
DVF-3080/DVF-8100 (EN/K,P,E,X,Y)
Set Up functions
14
Preparations
LANGUAGE AUDIO
Menu Language
Select a language for the Setup menu and on-screen
display.
Disc Audio/ subtitle/ Menu
Select the language you prefer for the audio Track (disc
audio), subtitles, and the disc menu
Original: Refers to the original language in which the
disc was recorded.
Other: To select another language, press number but-
tons then ENTER key to enter the corresponding digit
number according to the language code list in the refer-
ence chapter. If You enter the wrong Language code,
press CLEAR key.
DISPLAY
TV Aspect
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 wide TV is connected.
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to "4:3".
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide Picture on the
entire screen and cuts off the
portions that do not fit.
Progressive Scan
When ON is selected, the confirmation screen for switch-
ing to Progressive Scan appears.
In case of a TV not compatible with Progressive Scan, the
screen disappears and return to the original display is
made after 10 seconds.
TV Output Select (only for Europe)
The TV Output Select mode is switched to RGB or YCbCr.
TV Aspect 16 : 9
Display Mode Widescreen
Progressive Scan Off
TV Output Select RGB
Each DVD disc has a variety of audio output options. Set
the player’s AUDIO options according to the type of
audio system you use.
Dolby Digital/ DTS/ MPEG
Bitstream: Select "Bit stream" if you connect the DVD
Player’s DIGITAL OUT jack to an amplifier or other
equipment with a Dolby Digital, DTS or MPEG de-
coder.
PCM (for Dolby Digital/ MPEG): Select when con-
nected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be auto-
matically down mixed to two-channel PCM audio.
Off (for DTS): If you select “Off'', the DTS signal is
not output through the DIGITAL OUT jack.
Sample Freq. (Frequency)
If you receiver or amplifier is NOT capable of handling 96
kHz signals, select 48 kHz. When this choice is made, this
unit automatically converts any 96 kHz signals to 48 kHz
so your system can decode them.
If your receiver or amplifier is capable of handling 96 kHz
signals, select 96 kHz. When this choice is made, this unit
passes each type of signal through without any further
processing.
Check the documentation for your amplifier to verify its
capabilities.
When the disc prohibits 96 kHz digital output, the signal
always is put out after down-conversion.
Dynamic Range Control (DRC)
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic presenta-
tion possible, thanks to digital audio technology. How-
ever, you may wish to compress the dynamic range of
the audio output (the difference between the loudest
sounds and the quietest ones). This allows you to listen
to a movie at a lower volume without losing clarity of
sound. Set DRC to On for this effect.
This function operates only at the time of playback of
DVDs recorded with Dolby Digital.
Vocal
Set to on only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc mix into nor-
mal stereo sound.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood DVF8100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood DVF8100 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood DVF8100

Kenwood DVF8100 Gebruiksaanwijzing - Nederlands, Italiano, Espanõl - 144 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info