672783
4
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
4
FCC WARNING
This equipment may generate or use
radio frequency energy. Changes or
modifications to this equipment may
cause harmful interference unless the
modifications are expressly approved
in the instruction manual. The user
could lose the authority to operate this
equipment if an unauthorized change or
modification is made.
FCC NOTE
This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation.
This equipment may cause harmful
interference to radio communications, if
it is not installed and used in accordance
with the instructions. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
Precautions for Use
Precautions for Installation
Install the device in a position where
it will not block the front view of the
driver (position where hidden by the
rear-view mirror).
Install the device so that it is within the
wiping range of the wiper.
Install the device in a position where it
will not interfere with the movement of
the rear-view mirror.
Take care not to install the device over
the vehicle inspection sticker or other
sticker.
Take care not to install the device where
it will interfere with driving or airbag
operation.
When installing the device in a vehicle
equipped with a driving support system,
check the instruction manual of the
vehicle and then select an installation
location that will not interfere with the
driving support system.
If the device is installed incorrectly,
event recording or parking recording
may not work correctly. Refer to "How to
Install" for the loosening of fixing knob,
installation orientation, installation angle,
and other information and then install
the device correctly.(P.8)
Do not install the device near an
electrical component. Doing so may
cause flickering and noise.
Use a commercially available cleaning
cloth or the like to wipe off all dirt and
grease on the mounting surface and
then fix the mount base in place. If the
device is re-affixed or mounted using,
for example, general-purpose double-
sided tape, the adhesion strength may
weaken and cause the device to fall.
After mounting the device, leave it
for 24 hours before use to enable
the mounting strength of the mount
DRV-N520W_EN301.indd 4 2017/03/08 14:05
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood DRV-N520 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood DRV-N520 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Kenwood DRV-N520

Kenwood DRV-N520 Gebruiksaanwijzing - Nederlands, Deutsch - 88 pagina's

Kenwood DRV-N520 Gebruiksaanwijzing - Français, Italiano - 88 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info