683035
18
Verklein
Vergroot
Pagina terug
1/25
Pagina verder
Configuring the Settings
Driving support settings
Forward collision warning ON/OFF*
This function detects the distance between you and the vehicle in front, and
sounds a warning if the distance is not safe in order to prevent a collision with
the vehicle in front. This functions at speeds of approximately 30 km/h and higher.
Lane departure warning ON/OFF*
This function detects the lane in which you are driving and sounds a warning if you
veer out of that lane. This functions at speeds of approximately 60 km/h and higher.
Departure delay warning ON/OFF*
This function sounds a warning if, while you are stopped, the vehicle in front of
you has taken off and your departure is too slow. With this function, a warning is
also sounded if you are backing up.
Detection range Adjust the horizon, position of the front tip of the engine hood, etc., before using
the driving support functions. ( P. 17)
Mounting height 1.2 m*/1.35 m/2 m
Set the height from the road surface to the position at which the camera is
mounted. ( P. 17)
System settings
Date/time Automatic*/Manual
Set whether to record the date and time automatically or manually. ( P. 36)
You must set the Time Zone
Daylight saving time OFF*/+1 hr./+30 min Set daylight saving time.
Notification volume The volume of the notification sound can be set in 6 steps (mute to maximum).
The notification sound is the sound issued as guidance during event recording,
when operating buttons, etc.
Playback volume
Set the volume of the sound when playing recorded files in 6 steps (mute to
maximum).
Monitor Time settings 10 sec.*/1 min./3 min.
Set the time after which the monitor screen switches to the power-saving mode
during recording.
Operation settings
Always on*/OFF/Dim
Set the monitor screen's power-saving operation during recording. When the
MENU/OK button is pressed, the power-saving operation is temporarily canceled.
Mounting support tool Level
Use this to check whether the camera is level.
Satellite reception level
This displays the positioning satellite reception strength screen.
Select units km/h/mph*
Switch to kilometer or mile display.
Factory reset Restores the settings to the values set upon purchase.
When executed, the power turns off then back on and the setup screen appears.
Follow the instructions on the screen to configure the settings.
Setup Configure the settings related to installation of the camera in a specific order.
Update system Update the camera's firmware.
System version Display the camera's firmware version.
About updating the system
This function updates the camera's system firmware. For information and instructions on
updating, see the Kenwood website. http://www.kenwood.com/cs/ce/
SD card menu
SD card information (Slot 1) Display the information screen for the SD card in slot 1.
SD card information (Slot 2) Display the information screen for the SD card in slot 2.
Format SD card (Slot 1) Formats the SD card in slot 1, deleting all the files on the card.
Format SD card (Slot 2) Formats the SD card in slot 2, deleting all the files on the card.
* Factory default settings
3534
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood DRV-830 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood DRV-830 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Kenwood DRV-830

Kenwood DRV-830 Gebruiksaanwijzing - Nederlands - 52 pagina's

Kenwood DRV-830 Gebruiksaanwijzing - Deutsch - 49 pagina's

Kenwood DRV-830 Gebruiksaanwijzing - Français - 52 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info