606267
20
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
20 ñ English
Insulate unconnected wires with vinyl tape or other
similar material. To prevent a short circuit, do not
remove the caps on the ends of the unconnected
wires or the terminals.
Co
nnect the speaker wires correctly to the terminals to
which they correspond. The unit may be damaged or
fail to work if you share the ¤ wires or ground them to
any metal part in the car.
Wh
en only two speakers are being connected to
the system, connect the connectors either to both
the front output terminals or to both the rear output
terminals (do not mix front and rear). For example,
if you connect the ¢ connector of the left speaker
to a front output terminal, do not connect the ¤
connector to a rear output terminal.
Af
ter the unit is installed, check whether the brake
lamps, blinkers, wipers, etc. on the car are working
properly.
Mo
unt the unit so that the mounting angle is 30° or
less.
Th
is unit has the cooling fan to decrease the internal
temperature. Do not mount the unit in a place where
the cooling fan of the unit is blocked. Blocking these
openings will inhibit the cooling of the internal
temperature and result in malfunction.
Cooling fan
Do not press hard on the panel surface when installing
the unit to the vehicle. Otherwise scars, damage, or
failure may result.
Reception may drop if there are metal objects near
the Bluetooth antenna.
Bluetooth antenna unit
DNX715WDABDNX7150DAB
DNX4
Ñ Supplied accessories
First of all, make sure that all accessories are
supplied with the unit.
1
x1
2
(2 m)
x1
3
[1][2]
x1
4
[3]
x2
5
[3]
x1
6
(3.5 m)
x1
7
x1
8
(3 m)
x1
9
[1]
x1
[1]
DNX7150DAB only
[2]
DNX715WDAB only
[3]
Except DNX715WDAB
Ñ Unit
1) To prevent a short circuit, remove the key from
the ignition and disconnect the ¤ terminal of
the battery.
2) Make the proper input and output wire
connections for each unit.
3) Connect the wire on the wiring harness.
4) Take Connector B on the wiring harness and
connect it to the speaker connector in your
vehicle.
5) Take Connector A on the wiring harness and
connect it to the external power connector on
your vehicle.
6) Connect the wiring harness connector to the
unit.
7) Install the unit in your car
8) Reconnect the ¤ battery.
9) Press the <Reset> button. (P.4)
10) Perform the Initial Setup.
See First Step (P.6).
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood DNX715WDAB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood DNX715WDAB in de taal/talen: Engels als bijlage per email.

De handleiding is 1,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Kenwood DNX715WDAB

Kenwood DNX715WDAB Gebruiksaanwijzing - Nederlands - 35 pagina's

Kenwood DNX715WDAB Gebruiksaanwijzing - Nederlands - 131 pagina's

Kenwood DNX715WDAB Snelstart handleiding - Nederlands - 92 pagina's

Kenwood DNX715WDAB Gebruiksaanwijzing - Deutsch - 35 pagina's

Kenwood DNX715WDAB Gebruiksaanwijzing - Deutsch - 131 pagina's

Kenwood DNX715WDAB Snelstart handleiding - Deutsch - 92 pagina's

Kenwood DNX715WDAB Gebruiksaanwijzing - English - 131 pagina's

Kenwood DNX715WDAB Gebruiksaanwijzing - English - 35 pagina's

Kenwood DNX715WDAB Gebruiksaanwijzing - Français - 131 pagina's

Kenwood DNX715WDAB Gebruiksaanwijzing - Français - 35 pagina's

Kenwood DNX715WDAB Snelstart handleiding - Français - 92 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info