Remove the lid by the appropriate handles. It is best to use a pair of kitchen gloves in order
to avoid scalding. Put the bags with your dishes carefully into the water. The water level
should not exceed the maximum mark.
When the bags have been put properly into the pot, replace the lid onto the device and
press the start buon.
Aer the set preparaon me has elapsed, an acousc signal is issued three mes.
The device switches o automacally.
Preparaon with the slow-cooking funcon
Make sure that the device is posioned on a plane surface. Connect the device to an elec-
trical outlet and press the switch.
The device beeps and the display panel lights up. The device automacally goes to the
sous-vide menu.
Remove the lid and place your dishes into the water of the inner pot.
Set the slow-cooking funcon via the menu unl the display panel lights up and indicates
temperature LOW.
Change the seng from Low to High via the arrow keys.
In order to set the me, press the me buon and choose the cooking me by pressing
the arrow keys up or down. Each touch of the buon changes the me by 30 minutes.
If you keep the buon pressed, the me seng moves forward faster.
As soon as you have set the desired me and temperature via the menu, press the start
buon to iniate the cooking process.
The me measurement starts with a countdown.
Aer the set me has elapsed, an acousc signal is issued three mes. Then the keep-
warm funcon automacally switches on and a green light appears in the display.
The mer starts and indicates how long the dishes have been kept warm.
Please make sure that you do not li the lid during cooking as this might extend the prepa-
raon me. Only li the lid if it is absolutely necessary.
6. Cleaning and maintenance
Switch the device o and disconnect it from the power supply.
Before you clean the device, make sure it has cooled down suciently aer use.
Only pour the water aer it has cooled down suciently in order to avoid scalding.
Never submerge the device into water, as it may be damaged.
The lid and the inner pot are dishwasher-proof.
Before reusing the parts, dry them suciently, please.
