771458
9
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
I&O manual
7
3 cm/m
50mm
50mm
3.2.1 Hydraulic connections
Connection to the system
connect to the unit
condensate discharge
or defrosting tray.
IMPORTANT!
CAUTION
Fig.3-7
It is most important that the hydraulic connections are made
with great care by specialized fitters.
Connect the unit to the water system by means of the fittings which
are marked Flow and Return.
Creation of the trap
The condensation drainage system must be fitted with a
suitable trap to prevent seepage of odors. Following are
directions for setting up the trap.
Fig.3-8
Always provide a drainplug at the bottom of the trap, and
arrange it so that it can be quickly dismantled
Fig.3-6
IMPORTANT!
CAUTION
All the water coils, including the optional extras, are equipped with air
bleed-valves next to the upper union, and with water drain valves
need to the lower union.
All the valves can be opened and closed with screwdrivers or allen
keys.
CAUTION
IMPORTANT!
The water coils can be partially drained through the drain
valves.
To drain them completely, they should be blown out with an
air-jet.
When installation is complete, it is necessary to:
Position the drain-tube so that it does not put strain on the
drainage connector on the unit.
How to turn the coil round, from fittings on the left
(standard) to fittings on the right.
The unit is supplied as standard with connections to the coil on the
left. It is possible however to turn the coil round, so that the
connections are on the right.
The operation of turning the principal and supplementary coils round
can be carried out with the unit in situ, but it is preferable to do it
before installation, with the unit on solid ground.
Procedure to reverse the coil:
Bleed the air contained in the circuit.
Lag the connection pipes and any valves titted with
anticondensation material 10 mm thick or install the auxiliary
drain.
Pour water into the condensation collector tray and check
that the liquid drains properly, following it right through to the
exit of the drain tube. If it does not, check the fall and look for
possible blockages.
Setting up the condensate drainage system
The condensation drainage system must be set up with an
adequate fall, to ensure that the water escapes properly.
Following are directions for setting up a proper condensation
drainage system.
1 Remove the casing (on versions I and II);
2 Remove the screws on both sides which hold the coil to the
structure of the unit;
3 Turn the coil round in the direction indicated in Fig;
4 Re-fit the coil mounting screws;
5 Re-fit the casing (on versions I and II)
Fig.3-9
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kaysun KFC-SE-2T-400D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kaysun KFC-SE-2T-400D in de taal/talen: Engels als bijlage per email.

De handleiding is 1.88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info