771549
8
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
8
(10) Air filter cleaning reminding function
The wired controller records the total running time of the indoor unit, when the accumulated
running time reaches the pre-set value, air filter cleaning reminding icon will be lighted up, to
remind that the air filter of the indoor unit needs to be cleaned. Long press left button for 3
seconds, and clear the reminding icon and the wired controller will re-accumulate the total
running time of the indoor unit.
Notes: The default setting value of reminding function is 2500 hours, and it can change to be 1250 hours, 5000
hours or 10000 hours. The setting methods please refer to the installation manual.
(11)Swing function
If the indoor unit supports swing function, press the right button to adjust the air outlet direction of
the indoor unit. Long press this button for 3 seconds can turn on or turn off the auto-swing
function. When the auto-swing function is turned on, the swing icon will be lighted up.
(12)Follow me function
When the system is running and the operating mode is AUTO. COOL or HEAT, press the left
button will activate the Follow Me function. Press left button again will cancel follow me function.
When the operating mode is changed, and then will cancel this function as well. When the Follow
Me function is activated, the icon will be light up, and the wired controller will display room
temperature read from the local sensor, and transmit the temperature value to the indoor unit
every 3 minutes.
(13) Setting addresses
§ Press the Temp. UP and DOWN button simultaneously for more than 8 seconds, then the
controller gets into address setting mode.
§ In the address setting mode, there are 2 main functions:
§ Querying address: Press MODE button, the corresponding indoor unit will display its
address.
§ Setting address: Use the UP and DOWN buttons to choose an address you want. Then
press the FAN button to set the indoor unit's address. The corresponding indoor unit will
display the new address and record it. After about 4 seconds, this displaying will fade out
and indoor units turn to normal display mode.
§ After setting addresses, users can press the Quiet/OK button can exit the address setting
mode.
§ After each setting address and enter the query / set mode again, it will display the last set of
address, but if re-power, this address will be cleared.
§ In the address setting mode, wired controller does not respond to any command from remote
controller.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kaysun KCT-02.1 SR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kaysun KCT-02.1 SR in de taal/talen: Engels als bijlage per email.

De handleiding is 0.88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kaysun KCT-02.1 SR

Kaysun KCT-02.1 SR Gebruiksaanwijzing - Nederlands - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info