473812
18
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
18 / 36
Because of the serious consequences if the work is
not done properly, earthing and lightning protection
work may be performed only by specially trained
electricians!
Never perform grounding and lightning
protection work if you are not a specialist with
the appropriate skills!
The instructions printed here are not an
invitation to non-specialists to perform earthing
and lightning protection work on their own account;
they are meant solely as additional information for
the specialists whom you employ!
Potenzialausgleichsschiene
Netzanschluss
Potenzial-
ausgleichs-
leitung
Potenzialausgleichsschiene
Erdungs-
anschluss
Erdungs-
leitung
Potenzial-
ausgleichs-
leitung
The standard says that
within the hatched area
antenna grounding
is not compulsory.
Antenna earthing/lightning protection
The antenna must be erected to DIN EN 60728-11 and earthed
as speci ed. Only these antennas are exempt from the earthing
requirement:
more than 2 m below the edge of the roof
and at the same time less than 1.5 m from buildings
For earthing, the mast must be connected by means of a suitable
ground conductor to the lightning protection system of the building,
using the shortest route. If no lightning protection system is
available: to the building's earth conductor.
Connection to the lightning protection system may be made only
by a quali ed lightning protection system installation engineer.
a) Suitable as ground conductors are:
a single solid wire with a cross-section of at least 16 mm
2
copper, at least 25 mm
2
aluminium or at least 50 mm
2
steel.
b) Unsuitable as ground conductors are:
- the outer conductor of the antenna cable
- metallic domestic installations (such as the metal pipework
of a water or heating system), since the permanence of the
electrical connection cannot be guaranteed
- or the shielding conductor or neutral conductor of the mains
power supply.
c) Routing of ground conductors
Antenna cables and earthing conductors must not be routed
through rooms used for storing easily ammable substances
(such as hay or straw) or in which an explosive atmosphere
can develop (such as gases, vapours).
If the parabolic antenna is used in an integrated antenna
system (e. g. a distribution system), the grounding measures
must also be designed in such a way that grounding protection
is still maintained if individual units are removed or replaced.
Hazards may be caused not only by thunderstorms (lightning), but
also by static charges and short circuits in the connected units.
For safety reasons therefore in general for all antenna systems
an equipotential bonding conductor of 4 mm² copper should be
provided.
The cable screens of all coaxial antenna downlink cables must be
connected to the mast with an equipotential bonding conductor.
Equipotential bonding rail
Equipotential bonding rail
Mains connection
Earthing
conductor
Earthing
connector
Equipoten-
tial bonding
cable
Equipoten-
tial bonding
cable
1.5m
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kathrein RCU 672 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kathrein RCU 672 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 2,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info