Handleiding Karcher SC 1 Premium (pagina 12 van 130) (Alle talen)

657218

Verklein

Vergroot

Pagina terug

1/130

Pagina verder

– 7

When cleaning painted or plastic-coated surfaces, as

found on kitchen and living room furniture, doors, par-

quet; wax, furniture polish, plastic surfaces or paint can

come loose or stains can be created. When cleaning

these surfaces, briefly steam a cloth and wipe the sur-

faces with it.

ATTENTION

Never direct the steam jet at glued edges as the edge

band may loosen. Do not use the steam cleaner on un-

sealed wooden or parquet floors.

In case of low outside temperatures, especially in the

winter, warm up the window pane by slightly steaming

the entire glass surface. This will prevent tensions on

the surface which might lead to glass breakage.

Then clean the window surface with the hand nozzle

and attachment. Use a squeegee to remove the water

or wipe the surfaces dry.

ATTENTION

Do not direct steam onto the sealed locations of the win-

dow frame to prevent damage.

The steam nozzle or steam gun can also be used with-

out accessories, for example:

– to remove odours and wrinkles from hanging

clothes by steaming them at a distance of 10 to 20

cm.

– for moist dusting, by briefly steaming the cloth and

wiping the furniture with it.

The closer this nozzle is to the contaminated area, the

higher the cleaning effect, as the temperature and the

steam are highest at the nozzle output. Especially suit-

ed for cleaning difficult access locations, joints, fittings,

drains, sinks, toilets, blinds and heaters. Heavy lime

scale can be drenched in vinegar prior to steam-clean-

ing. Let the vinegar penetrate for about 5 minutes.

The round brush can be installed onto the detail nozzle

as an accessory. Attached brushes can therefore be

used to remove heavy soiling.

ATTENTION

Not suitable for cleaning sensitive surfaces.

Illustration

 Attach the round brush to the detail nozzle.

The power nozzle can be installed onto the detail nozzle

as an accessory.

The power nozzle increases the emission speed of the

steam. Therefore, it is well-suited for cleaning very

tough dirt, blowing out corners, grooves, etc.

Illustration

 Attach the power nozzle to the detail nozzle ac-

cording to the round brush.

Pull the terry cloth cover over the hand nozzle. Especial-

ly well-suited for small washable areas, shower stalls

and mirrors.

Suited for all washable walls and floor coverings, e.g.

stone floors, tiles and PVC floors. Work slowly on very

dirty surfaces to allow the steam to act on the dirt for a

longer period of time.

Note

Detergent residue or care emulsions that are still pre-

sent on the surface to be cleaned can lead to streaks

during steam cleaning. However, these will disappear

with repeated cleaning procedures.

Illustration

 Attach the floor cloth to the floor nozzle.

1 Fold the floor cloth the long way and place the floor

nozzle on top of it.

2 Open holding clamps.

3 Place the cloth ends into the openings.

4 Close the holding clamps.

Rinse the boiler of the steam cleaner after completion of

the work.

 Fill the boiler with water and shake it strongly. This

dissolves lime scaling residing on the boiler bottom.

 Empty water out.

As limescale builds up in the appliance, we recommend

to descale the appliance in the following intervals

(TF=tank fillings):

Note

In case of continuous use of commercially available dis-

tilled water, no descaling of the boiler is necessary.

Note

The hardness of the tap water can be inquired at your

water management office or the municipal utilities.

 Disconnect the mains plug from the socket.

 Allow device to cool down.

 Remove the safety lock from the device.

Illustration

 Completely empty the steam boiler to remove exist-

ing water.

 Use KÄRCHER descaler sticks for descaling.

Please follow the dosing instructions on the pack-

aging when preparing the descaler.

ATTENTION

Use caution when filling and emptying the steam clean-

er. The descaling solution can have an aggressive ef-

fect on delicate surfaces.

 Pour the descaling solution into the boiler and allow

it to react for approximately 8 hours.

Cleaning of Coated or Lacquered Surfaces

Cleaning of Glass

Steam nozzle / Steam gun

Detail nozzle

Round brush

Power nozzle

Hand nozzle

Floor nozzle

Care and maintenance

Rinsing the boiler

Descaling the boiler

Degree of hardness ° dH mmol/l RF

I soft 0- 7 0-1,3 35

II medium 7-14 1,3-2,5 30

III hard 14-21 2,5-3,8 20

IV very hard >21 >3,8 15

12 EN

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Karcher SC 1 Premium Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info