Handleiding Karcher RLM4 (pagina 48 van 444) (Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Deens, Zweeds)

724904

Verklein

Vergroot

Pagina terug

1/444

Pagina verder

48 RLM 4GB

4 ASSEMBLY

4.1 Unpacking the machine

1. Open the packaging carefully.

2. Carefully remove all components from the

packaging and check for transport damage.

Note:If there is any transport damage, im-

mediately notify your Kärcher dealer, techni-

cian or service partner in accordance with the

warranty conditions.

3. Check the scope of supply, see chapter 2.1

"Scope of supply", page39.

If the appliance is going to be sent on, retain the

original packaging and accompanying docu-

ments. They will also be required for return ship-

ment.

4.2 Planning the mowing areas (01)

Location of the charging station (01/1)

■

Shortest possible distance to the largest

mowing area

■

Level surface

■

Protected against direct sunlight and harsh

weather conditions

■

Connection option for power source

■

Free accessibility for the automatic lawn

mower

Routing the boundary cable (01)

The boundary cable must be laid in a continuous

loop in a clockwise direction.

Corridors between mowing areas (01/h)

A corridor is a narrow section in the grass surface

and can be used to connect two mowing areas.

Main area and secondary area(s) (01)

■

Main area (01/HF): This is the grass surface

on which the charging station is located and

whose entire surface can be mowed auto-

matically by the appliance.

■

Secondary area (01/NF): If a grass surface

cannot be reached by the appliance from the

main area, carry the appliance to the second-

ary area by hand if necessary. Secondary ar-

eas can be processed using manual opera-

tion.

The main area and secondary areas are bounded

by the same continuous boundary cable, howev-

er.

Position of the entry points (01/X0–01/X3)

At the specified mowing time, the appliance

moves along the boundary cable to the specified

entry point and begins to mow there.

The entry points can be used to specify which ar-

eas of the mowing area are to be mowed several

times.

4.3 Preparing the mowing areas

1. Check that the grass surface is larger than

the area covered by the appliance. If the

grass surface is too large, an irregularly

mown lawn will result. Reduce the size of the

grass surface to be mowed if necessary.

2. Before installation of the charging station and

boundary cable or start-up of the appliance:

Use a lawn mower to mow the grass surface

to a low cutting height.

3. Remove any obstacles on the grass surface

or exclude them with the boundary cable (see

chapter 4.5.3 "Excluding obstacles",

page50):

■

Flat obstacles that will be run over and

could damage the cutting blade (e.g. flat

stones, transitions from the grass surface

to the terrace or paths, plates, kerb-

stones, etc.)

■

Holes and protrusions in the grass sur-

face (e.g. molehills, burrowing holes, pine

cones, fallen fruit, etc.)

■

Steep ascents and descents of more

than 45% (24°)

■

Bodies of water (e.g. ponds, streams,

swimming pools, etc.) and their demarca-

tion to the grass surface

■

Shrubs and hedges that can become

broader

4.4 Setting up the charging station (03/a)

1. Place the charging station (01/1) at right an-

gles to the planned location of the boundary

cable as described below:

■

Level (check with spirit level)

■

Straight and level entrance and exit

■

Not arched (the charging pole must not

bend or tilt during subsequent tightening

of the grass screws)

■

When placed on a wall: a distance of at

least 5cm

2. Fix the charging station (03/2) to the floor

with five grass screws (03/1).

4.5 Installing the boundary cable

NOTE

If the supplied boundary cable is too

short, an extension cable can be ob-

tained from your Kärcher dealer, techni-

cian or service partner.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Karcher RLM4 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info