478380
11
Verklein
Vergroot
Pagina terug
1/168
Pagina verder
English 11
When unpacking the product, make sure that no
accessories are missing and that none of the
package contents have been damaged. If you
detect any transport damages please contact
your dealer.
1 ON/OFF switch for appliance
2 Power cable with plug
3 High pressure connection
4 High pressure hose
5 Trigger gun
6 Lock trigger gun
7 Connection for water supply with filter
8 Coupling element for water connection
9 Suction hose for detergent
10 Storage for trigger gun
11 Storage for high-pressure hose
12 Storage for spray lance
13 Transport handle
14 Spray lance with pressure regulation (Vario
Power)
15 Spray lance with dirt blaster
Special accessories expand the possibilities of
using your appliance. Please contact your Kärch-
er dealer for further information.
Illustrations on Page 2
Illustration
Mount loose parts delivered with appliance prior
to start-up.
Illustration
Î Pull out the clamp for the high-pressure hose
from the trigger gun (e.g. a small screwdriv-
er).
Î Connect high pressure hose to trigger gun.
Î Push the clamp in until it locks. Check the se-
cure connection by pulling on the high-pres-
sure hose.
According to the applicable regula-
tions, the appliance must never be
used on the drinking water net without
a system separator. Use a suitable sys-
tem separator manufactured by Kärcher; or, as
an alternative, a system separator as per EN
12729 Type BA.
Note: Impurities in the water can damage the
high-pressure pump and the accessories. For
protection, the use of the Kärcher water filter (op-
tional accessory, order no. 4.730-059) is recom-
mended.
Observe regulations of water supplier.
For connection values, see type plate/technical
data.
Î Use a fibre-reinforced water hose (not in-
cluded) with a standard coupling. (Minimum
diameter 1/2 inch (13 mm), minimum length
7.5 m).
Illustration
Î Screw the coupling unit (supplied) to the wa-
ter connection on the appliance.
Î Push the water supply hose onto the cou-
pling unit, then connect it to the water supply.
This high-pressure cleaner is suited to work with
the Kärcher suction hose with backflow valve
(Optional accessory, order no. 4.440-238) to
draw in surface water, e.g. from water butts or
ponds (see specifications for max. suction
height).
Î Fill the Kärcher suction hose with backflow
valve with water, screw to water supply and
hang into he water butt.
Î Separate the high pressure hose from the
high pressure connection point of the appli-
ance.
Î Switch the appliance on "I/ON" and operate
until the water exits the high-pressure con-
nection without bubbles.
Î Turn off the appliance "0/OFF".
Caution
Never operate the high-pressure cleaner when
the tap is turned off as dry running will damage
the high-pressure pump.
Illustration
Î Connect the high pressure hose to the high
pressure connection of the appliance.
Illustration
Î Push the spray lance into the trigger gun and
fasten it by turning it through 90°.
Commissioning and operation
Description of the Appliance
Special accessories
Before Startup
Water supply
Water supply from mains
Drawing in water from open reservoirs
Start up
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Karcher K 3.98M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Karcher K 3.98M in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info