– 3
Take the filter unit out of the device holding the
handles and turn it around.
Loosen the screws and remove the cleaning device.
Loosen the screw connection of the clamping ring.
Remove and replace filter.
Insert new filter.
Fit and tightly screw down clamping ring.
Fit and screw down cleaning device.
Note: When inserting the filter unit, ensure that the tab
of the cleaning device engages in the shaft.
DANGER
First pull out the plug from the mains before carrying out
any tasks on the machine.
DANGER
Have all checks and works on electrical parts performed
by an expert.
– No electrical voltage.
Check the receptacle and the fuse of the power
supply.
Check the power cable and the power plug of the
device.
If malfunction can not be fixed, the device must be
checked by customer service.
The warranty terms published by the relevant sales
company are applicable in each country. We will repair
potential failures of your appliance within the warranty
period free of charge, provided that such failure is
caused by faulty material or defects in manufacturing. In
the event of a warranty claim please contact your dealer
or the nearest authorized Customer Service center.
Please submit the proof of purchase.
Only use original accessories and spare parts, they en-
sure the safe and trouble-free operation of the device.
For information about accessories and spare parts,
please visit www.kaercher.com.
– Accessories are not included in the delivery. The
accessories for the device must be ordered sepa-
rately, depending on the application.
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements of the EU Directives, both in its basic design
and construction as well as in the version put into circu-
lation by us. This declaration shall cease to be valid if
the machine is modified without our prior approval.
Troubleshooting
Motor (suction turbine) does not start
Customer Service
Warranty
Accessories and Spare Parts
EU Declaration of Conformity
Product: Dry vacuum cleaner
Type: 9.986-xxx
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2011/65/EU
2014/30/EU
Applied harmonized standards
EN 55014–1: 2017 + A11: 2020
EN 55014–2: 2015
EN 60335–1
EN 60335–2–69
EN IEC 61000–3–2: 2019
EN 61000–3–3: 2013 + A1: 2019
EN 62233: 2008
EN IEC 63000: 2018
Applied national standards
-
