804767
16
Verklein
Vergroot
Pagina terug
1/212
Pagina verder
16 English
4Lower shaft
5Upper shaft
6Trigger
7Speed switch
8Type plate
9Trigger lockout button
10 Right handle
11 Wing screw for adjusting the handle
12 Eyelet for harness
13 Battery pack unlocking button
14 Left handle
15 Carrying harness
16 *Battery Pack Battery Power+ 36V
17 *Quick Charger Battery Power+ 36V
18 *String guard
19 *String reel
* optional
Rechargeable battery pack
The device can be operated with a Kärcher 36 V Bat-
tery Power battery pack.
Installation
Installing shaft
1. Connect the upper and lower shaft segments.
Illustration B
Installing the handle
1. Screw the handle to the upper shaft section at the
desired height.
Illustration C
2. Use the wing screw to adjust the orientation of the
handle:
Perpendicular to the shaft during operation
Parallel to the shaft during transport and storage
a Loosen the wing screw.
Note
The orientation of the handle can only be changed when
the wing screw is completely loosened.
Illustration D
b Turn the handle in the desired direction.
c Tighten the wing screw.
Initial startup
Installing the battery pack
1. Push the battery pack into the mounting in the de-
vice until it audibly latches into place.
Illustration E
Operation
Hang the harness
Note
The harness serves as a self-rescue measure in dan-
gerous situations.
1 In an emergency, open the fastener and immediate-
ly pull the harness off your shoulders.
2 Put the device aside and step out of the danger ar-
ea.
Illustration F
1. Place the harness over both shoulders.
2. Snap the fastener into place.
3. Push the hook of the carrying harness into the eye-
let on the shaft.
Working techniques
CAUTION
Obstacles in the mowing area
Risk of injury and damage
Before starting mowing, check the work area for objects
that may be flung away, e.g. wires, stones, cords or
glass.
1. Remove the blade guard if necessary.
Illustration G
2. Press the trigger lockout button.
Illustration H
3. Press the trigger.
The device starts up.
4. Use the speed switch to select the desired speed.
Illustration I
5. Guide the device in a semi-circular movement over
the cutting area.
6. When mowing, guide the cutting head parallel to the
ground.
7. Mow long grass in several passes.
8. Release the trigger.
The device stops.
Changing the cutting tool
CAUTION
Risk of injury from sharp blades
Wear safety goggles and protective gloves when work-
ing on the device.
CAUTION
Uncontrolled startup
Incision injuries
Remove the battery from the device before all work on
the device.
The string reel and the trimmer knife are available as
cutting tools.
When changing from the trimmer knife to the string reel,
proceed as follows:
1. Disassemble the trimmer knife.
a Insert a tool (e.g. screwdriver) through the recess
on the side to prevent the cutting tool from rotat-
ing.
b Unscrew the nut.
Illustration J
c Remove the trimmer knife cover.
d Remove the sprocket.
Illustration K
e Remove the trimmer knife.
f Remove the cutting protection cover.
Illustration L
g Loosen the screws and remove the cutting pro-
tection.
2. Mount the string reel. When assembling the individ-
ual components, make sure that the respective side
recesses match.
a Mount the cutting blade on the string guard, if
necessary.
Illustration M
b Fit the string guard on the support.
Illustration N
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Karcher BCU 260-36 Bp bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Karcher BCU 260-36 Bp in de taal/talen: Alle talen als bijlage per email.

De handleiding is 26.24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info