804757
26
Verklein
Vergroot
Pagina terug
1/452
Pagina verder
26 English
Speed-dependent water dosing
If the speed-dependent water dosing is
switched on, the brush irrigation changes
proportionally with the speed.
The water dosing is also influenced by the
setting of the respective cleaning program
(0 ... 100%).
Set speed-dependent or constant water
dosing:
1. Turn the Info button until “water dosage
mode” is shown on the display.
2. Press the Info button.
3. Turn the info button until the desired
function is highlighted.
4. Press the Info button.
After-running time
1. Turn the info button until the "delay times"
menu item appears on the display.
2. Press the Info button.
3. Turn the info button until the desired as-
sembly is highlighted.
4. Press the Info button.
5. Turn the info button until the desired af-
ter-running time is displayed.
6. Press the Info button.
Setting the language
1. Turn the info button until the "language"
menu item appears on the display.
2. Press the Info button.
3. Turn the info button until the desired lan-
guage is highlighted.
4. Press the Info button.
Key management
The menu item "key menu" enables author-
izations for yellow Intelligent Keys and the
language of the display.
1. Insert the grey Intelligent Key.
2. Turn the info button until the "key menu"
menu item appears on the display.
3. Press the Info button.
4. Remove the grey Intelligent Key and in-
sert the yellow Intelligent Key to be per-
sonalized.
5. Select the menu item to be changed by
turning the info button.
6. Press the Info button.
7. Select the setting of the menu item by
turning the info button.
8. Confirm the setting by pressing the
menu item.
9. Select the next menu item to be
changed by turning the info button.
10.After all settings have been made, call
up the "save" menu by turning the info
button.
11.Press the Info button.
The authorizations are saved.
Switch attachment kits on / off
1. Turn the info button until the desired at-
tachment kit is shown on the display.
2. Press the Info button.
3. Turn the info button until the desired func-
tion of the attachment kit is displayed.
4. Press the Info button.
Factory setting
The factory settings for all cleaning param-
eters are restored.
1. Turn the info button until the "factory set-
tings" menu item is displayed.
2. Press the Info button.
3. Turn the Info button until "yes" is high-
lighted.
4. Press the Info button.
Adjusting parameters for cleaning
programs
All parameters for cleaning programs are
retained until another setting is selected.
1. Set the program switch to the desired
cleaning program.
2. Press the Info button.
The first adjustable parameter is dis-
played.
3. Press the Info button
The adjusted value flashes.
4. Set the desired value by turning the Info
button.
5. Confirm the changed setting by pressing
the Info button or wait until the set value is
automatically accepted after 10 seconds.
6. Select the next parameter by turning the
Info button.
7. After changing all desired parameters,
turn the Info button until the "exit" menu
item is displayed.
8. Press the Info button.
The menu is exited.
Transport
DANGER
Driving on slopes
Risk of injury
Observe the maximum permissible gradi-
ent when driving the device on slopes for
loading and unloading purposes (see chap-
ter "Technical data").
Drive slowly.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during
transportation.
1. With the D cleaning head installed, re-
move the disc brushes from the brush
head.
2. When transporting in vehicles, secure
the device against slipping and tipping
over according to the applicable guide-
lines.
Storage
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during
storage.
ATTENTION
Frost
Destruction of the device through freezing water
Drain all water from the device.
Store the device in a frost-free location.
This device may only be stored indoors.
Fully charge the batteries before storing
them for a long period.
Fully charge the batteries at least every
month during storage.
Care and maintenance
DANGER
Inadvertently starting up device
Risk of injury, electric shock
Turn the program switch to the “OFF” position.
Remove the Intelligent Key prior to all work
on the device.
Pull out the charger mains plug.
Unplug the battery connector.
Drain and dispose of the waste water
and fresh water.
Maintenance intervals
Each time after use
ATTENTION
Improper cleaning
Risk of damage.
Do not spray the device with water.
Do not use aggressive cleaning agents.
A detailed description of the individual
maintenance work is provided in the chap-
ter "Maintenance Work".
Drain the waste water.
Rinse the waste water tank with clear water.
Clean the coarse dirt filter.
Only with R cleaning head: Remove the
coarse dirt container and empty it.
Clean the exterior of the device using a
damp cloth, wetted with a mild washing lye.
Check the suction lips, check for wear
and replace if necessary.
Clean the squeegee blades, check for
wear and replace if necessary.
Clean the brushes, check for wear and
replace if necessary.
Charge the battery.
If the charging state of the battery is
below 50%, charge the battery fully
and without interruption.
If the charging state of the battery is
above 50%, only recharge the battery
if the entire operating duration will be
required when next used.
Setting ON [ml/m2]OFF[l/min]
0% 0 0
10% 7.5 0.6
20% 15 1.1
30% 22.5 1.7
40% 30 2.3
50% 37.5 2.8
60% 45 3.4
70% 52.5 3.9
80% 60 4.5
90% 67.5 5.1
100% 75 5.7
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Karcher B 110 R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Karcher B 110 R in de taal/talen: Alle talen als bijlage per email.

De handleiding is 30.79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info