22 | EN
3. Press PLAY ► (21) to start playback of deck A or press PLAY ► (26) for deck B. Playback stops
automatically at the end of the tape.
4. Press STOP/EJ. (24) or (29) to stop playback prior to the end of the tape.
FAST FORWARD/REWIND
1. Press REW ◄◄ (22) to activate rewind for deck A or press REW (27) for deck B.
2. Press F.FWD ►► (23) to activate fast forward for deck A or press F.FWD (23) for deck B.
3. Press STOP/EJ. ■ (24) or (29) to stop fast forward/rewind.
RECORD (DECK A ONLY)
Press REC ● (20) to simultaneously activate PLAY ► (21). If the inserted tape is write-protected both
buttons will not lock in place and no recording is possible.
RECORDING FROM DISC OR USB (DECK A ONLY)
1. Set the function selector (7) to CD/MP3 position.
2. Insert a CD or a USB as the manual.
3. Select the track to be recorded with (38) or (39).
4. Press ►|| (34).
5. Press STOP/EJ. ■ (24) to open deck A.
6. Insert a blank cassette.
7. Ensure the write protection is not removed.
8. Close the cassette deck.
9. Press REC ● (20).
10. Press ►|| (34) to start CD playback.
11. To pause your recording press PAUSE || (25).
12. To resume the recording press PAUSE || (25) again.
13. Press STOP/EJ. ■ (24) to stop the recording.
RECORDING FROM RADIO (DECK A ONLY)
1. Set the function selector (7) to RADIO position.
2. Select frequency band and radio station.
3. Insert a blank cassette.
4. Press REC ● (20).
5. To pause your recording press PAUSE || (25).
6. To resume the recording press PAUSE || (25) again.
7. Press STOP/EJ. ■ (24) to stop the recording.
RECORDING FROM BUILT-IN MICROPHONE (DECK A ONLY)
1. Set the function selector (7) to TAPE (NOR) position.
2. Insert a blank cassette.
3. Press REC ● (20) and talk into the built-in microphone MIC (17).
4. Press STOP/EJ. ■ (24) to stop the recording.
ERASE A TAPE
1. Set the function selector (7) to TAPE (NOR) position.
2. Press REC ● (20) to erase the existing recordings. Ensure only little background noise, as the
built-in microphone MIC (17) is turned on.
DUBBING FROM DECK B TO DECK A
The 2 decks of the unit allow dubbing from tape to tape. Recording is only possible with deck A; deck
B serves only playback purposes. You can dub with normal speed or high speed.
1. Insert the recorded tape in deck B.
2. Insert the tape to be recorded in deck A.
3. Set the function selector (7) to TAPE (HI) or TAPE (NOR) position. TAPE (HI) is used for high-
speed dubbing and TAPE (NOR) for dubbing with normal speed.
4. Press PAUSE || (25) and (30) for decks A and B.
