652947
18
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
18 | EN
Power Supply
The unit requires DC 9V 2.0A .
Plug the supplied adaptor cable into the connector on the back of the unit and the other end into
a suitable wall socket.
Make sure that the output power of the wall outlet matches the required power of the adaptor.
Adaptor must be plugged in to operate. The unit does not operate on batteries.
Basic Functions
Switching the Unit On & Off
1. Power the unit as described above.
2. The unit is now in standby mode and the time will be shown in the display.
3. To switch the unit on, press the STANDBY button.
4. To switch the unit off into standby mode, press the STANDBY button once again.
Clock Setting
The clock can only be set while the unit is in standby mode.
1. While the unit is in standby mode, press the CLK SET button. The time format will be shown.
2. Select between 12h display and 24h display by pressing the / buttons.
3. Press the CLK SET button again. The hours will start ashing.
4. Set the current hours by pressing the / buttons.
5. Press the CLK SET button again. The minutes will start ashing.
6. Set the current minutes by pressing the / buttons.
7. Press the CLK SET button again to conrm all settings. The time is now set.
Alarm Setting
An alarm can only be set while the unit is in standby mode.
This unit enables you to set 2 separate alarms. You can select to wake to CD, radio or buzzer.
1. While the unit is in standby mode, press and hold for 2 seconds the ALARM 1 or ALARM 2 but-
ton. The symbol
(or ) and the hour of alarm 1 (or alarm 2) will ash.
2. Set the desired hour by pressing the / buttons.
3. Press the ALARM 1 (or ALARM 2) button again. The minutes will start ashing.
4. Set the desired minutes by pressing the / buttons.
5. Press the ALARM 1 (or ALARM 2) button again to select the wake up mode.
6. Select between CD, radio, or buzzer by pressing the / buttons.
Activating/Deactivating an Alarm
To activate a previously set alarm, press the respective ALARM button (1 or 2) while the unit is
in standby mode. The alarm symbol
(or ) appears in the display. This alarm will now ring at
the previously set time.
To deactivate a set alarm, press the respective ALARM button (1 or 2) while the unit is in standby
mode. The alarm symbol
(or ) will disappear from the display. This alarm is now deacti-
vated and will not ring.
Checking a Set Alarm
Press the INFO button to check at what times and modes the alarms are set.
Stopping an Active Alarm
When the alarm is sounding, press the ALARM 1 or ALARM 2 button to turn it off. The alarm
icon will disappear from the display. You must activate the alarm again in order for it to function
again the next day.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Karcher Audio MC 6540BT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Karcher Audio MC 6540BT in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info