14 | EN
7. Press STOP (12) to stop the playback of the CD.
Selection of a specic track
During the playback you can skip with B.SKIP (10) or F.SKIP (11) to the previous or next track.
1. Select the track in the playback, stop or pause mode with B.SKIP (10) or F.SKIP (11) and start the
playback with PLAY/PAUSE (9).
2. With a short keystroke on F.SKIP (11) skip to the next track or press repeatedly the key, until the
desired track number is shown on the display.
3. With a short keystroke on B.SKIP (10) skip to the beginning of the current track.
4. To skip back one or more tracks press more than one time B.SKIP (10).
Fast forward and rewind
Press and hold F.SKIP (11) or B.SKIP (10) to move fast forward or backward within the track. At this
action the sound is muted automatically.
Playback mode
• By pressing REPEAT (14) the playback mode can be toggled. The indication of the adjusted play-
back mode takes place with the decimal point following the rst digit on the LED display.
• To cancel the playback mode press repeatedly REPEAT (14), until the decimal point following the
rst digit on the LED display disappears.
Repeat a single track
Press once REPEAT (14) to repeat the current track continuously. On the display the decimal point fol-
lowing the rst digit is ashing.
Repeat all tracks
Press twice REPEAT (14) to repeat the complete CD continuously. On the display the decimal point fol-
lowing the rst digit lights up permanent.
Program playback
Up to 20 tracks can be programmed to be played in a specic order.
1. Press once PROGRAM (13) during the playback or stop mode. On the display “00“ and also the
PROGRAM LED (2) are ashing.
2. Select with B.SKIP (10) or F.SKIP (11) the desired track number.
3. Store the track with PROGRAM (13). The program number will be increased by one and shown for
short time on the display.
4. Repeat steps 2 and 3 to program up to 20 tracks.
5. Press PLAY/PAUSE (9) to start the playback of the tracks in the programmed order.
6. Stop the programmed playback with STOP (12).
7. Press in the stop mode PROGRAM (13) and then PLAY/PAUSE (9) again to continue the program
playback.
8. After pressing PROGRAM (13) in the stop mode you can check the programmed track numbers in
the program memory with B.SKIP (10) or F.SKIP (11).
9. Delete the programmed sequence by opening the CD door or turning off the CD player with OFF.
VOL. (17).
Karaoke function
The device is equipped with two coequal microphones.
1. Place a CD on center spindle with the cover side faced up and close the CD door (4).
2. Press PLAY/PAUSE (9) to start the playback.
3. Slide the ON/OFF button (5) on the microphone to the ON position.
4. Adjust the microphone volume by rotating the - MIC VOL + (8) knob to a suitable listening level.
5. Now you can start singing into the microphone together with the music from the CD.
Note: Don’t be too close with the microphones to the speakers; otherwise an acoustic feedback (whis-
tling from the speakers) can happen.
