– 6
–Warning and information
plates on the machine pro-
vide important directions for
safe operation.
–Apart from the notes con-
tained herein the general
safety provisions and rules
for the prevention of acci-
dents of the legislator must be
observed.
DANGER
Pointer to immediate danger,
which leads to severe injuries or
death.
몇WARNING
Pointer to a possibly dangerous
situation, which can lead to se-
vere injuries or death.
몇CAUTION
Pointer to a possibly dangerous
situation, which can lead to mi-
nor injuries.
ATTENTION
Pointer to a possibly dangerous
situation, which can lead to
property damage.
DANGER
Risk of electric shock.
Turn off the appliance and re-
move the mains plug prior to
any care and maintenance
works.
Repair work and work on the
electrical components may
only be performed by an au-
thorised customer service.
Never touch the mains plug
and the socket with wet
hands.
Check the power cord with
mains plug for damage prior
to every use. Immediately
have damaged power cord
replaced by an authorised
customer service / electrician.
Do not operate an appliance if
the power cord is damaged.
Do not use scouring agents,
glass or multi-purpose clean-
ers!
Do not immerse the appli-
ance into water!
Do not carry / transport the
appliance on the mains cable.
Do not scrape the power cord
across sharp edges and en-
sure that it does not get
pressed.
Do not remove the mains plug
from the socket by pulling on
the power cord.
몇WARNING
The appliance may only be
connected to an electric sup-
ply that has been installed by
an electrician in accordance
with IEC 60364.
The appliance may only be
connected to alternating cur-
rent. The mains voltage must
correspond with the voltage
indicated on the type plate.
For safety reasons, we rec-
ommend that you operate the
appliance only via a residual
current device (max. 30 mA).
Safety instructions
Hazard levels
Electric components
