14 Original User Manual | Pedelec Impulse Speed 2.0
There is no memory eect, so you can top up your
battery aer every trip. Then you are always ready
for the o.
Ideally you should charge the battery at a temper-
ature of between +10°C and +30°C. It takes longer
to charge the battery at low temperatures, while
the battery will not charge up at temperatures
higher than +45°C. Ideally, you should charge and
store the battery inside your house or in a warm
garage when the outside temperature is low. In
this case, you should only t the battery onto your
bike just before using it.
5.1.3 Installing the battery
1. a) Down tube battery: Insert the battery into the bat-
tery holder of the Pedelec om the ont/above. At the
same time, the key must be in the lock and must be
turned anticlockwise.
b) Seat tube battery: Insert the battery into the holder
of the Pedelec om the le by tilting it outwards at
roughly 45°.
Installing the battery
DOWN TUBE BATTERY SEAT TUBE BATTERY
2. Press the battery down into the holder until the lock-
ing mechanism engages. Now turn the key clockwise
and remove it. The battery is now locked in place.
Locking the battery
DOWN TUBE BATTERY
SEAT TUBE BATTERY
3. Make sure the battery is rmly in place.
5.2 Battery information system
There is a display panel on the outer face of the battery
which includes ve LEDs and a battery button or push
button. The LEDs light up as soon as you press the battery
button or push button. The charge state and capacity of
the battery is indicated by the number of LEDs that light
up and the way in which they light up.
Battery button Push button
DOWN TUBE BATTERY SEAT TUBE BATTERY
5.2.1 Checking the charge state
a) Down tube battery: Press the battery button briey. The
LEDs light up and display the current battery charge state.
DISPLAY
BATTERY CHARGE
STATE
•••••
5 LEDs light up 100-%
••••
4 LEDs light up -%
•••
3 LEDs light up -%
••
2 LEDs light up -%
•
1 LED lights up -%
1 LED ashes -%
