SEAT TUBE BATTERY
1. Remove the cover om the charging socket.
2. Connect the plug of the charger to the battery.
Charging the battery
DOWN TUBE BATTERY SEAT TUBE BATTERY
3. Plug the charger in at the wall socket.
You must charge the battery completely before
using it for the rst time. As required by transport
law, the battery leaves the factory with an ap-
proximately 30% charge.
You can also remove the battery om your S-Pe-
delec and charge it elsewhere. For more informa-
tion, refer to
Chapter 5 “Battery”. Please note,
the battery is heavy. Hold on tight to it!
4. Once all of the battery LEDs have gone out, the battery
is lly charged. Pull the plug of the charger out of the
charging socket and unplug the charger at the wall
socket.
5. a) Down tube battery: If you removed the battery for
charging, replace it in the holder om the ont/above.
At the same time, the key must be in the lock and must
be turned anticlockwise. Press the battery down into
the holder until the locking mechanism engages.
b) Seat tube battery: If you removed the battery for
charging, reinsert it into the holder on the S-Pedelec
om the le-hand side. Tilt the battery outwards at an
angle of roughly 45° as you do so. Swivel the battery
into the upright position until the locking mechanism
engages.
Installing the battery
DOWN TUBE BATTERY SEAT TUBE BATTERY
6. Now turn the key clockwise and remove it. The battery
is now locked in place.
Locking the battery
DOWN TUBE BATTERY SEAT TUBE BATTERY
7. Make sure that the battery is securely positioned and
that the key is no longer in the lock.
